Book a reliable car head unit installation service in VIC

I need some one to installed and it’s a Apple play unit / head unit , also a spot lights on the front of the van ,

Install a new head unit. In a C3 Corvette. -Trim the plastic fascia for the new head unit. (Must be confident to be able to do this so that it is neat and without causing damage. -Install the new head unit so that it is installed properly and secure. -Connect the new head unit harness to the car wiring, so that everything works (Must be confident that you’re able to figure out which cable does what) -Connect the speakers (2x 6” in the dash and 2x 6x9” in the back) -Wire up the electric arial so that it goes up and down when the radio is turn on/off. -Test everything to make sure there are no issues. Additional info: -The interior of the car is stripped, so all wiring is easily accessible. -The old original head unit was working, so the wiring should be ok. -I have access to the wiring diagram for the car. -I have installed a new electric aerial but I believe that the existing relay needs to be bypassed to connect it ( I have a video on what needs to be done, but I need someone that will be able to work out how to make the arial go up and down when the radio is turn on/off, if the instructions on the video doesn’t work) https://www.youtube.com/watch?v=X0OL5h4sDNo

Apple play head unit installed 2008 Toyota Kluger

Hi - I am looking at installing a head unit/radio & Front & Back hardwired dash cam for a Tiguan Pacific 2013 model. Details of the head unit: https://gtzone.com.au/products/volkswagen-tiguan-2008-2014-9-inch-wireless-carplay-android-auto-head-unit-navigation-bluetooth-wifi-head-unit?_pos=1&_psq=tiguan&_ss=e&_v=1.0 Details for the RGB to CVBS (RCA) AV Converter: https://gtzone.com.au/products/vw-camera-rgb-to-cvbs-rca-av-converter?_pos=1&_psq=converter&_ss=e&_v=1.0 Details for the Dash Cam (Hard Wired): Q200 | THINKWARE Australia GPS: GPSANT DASH CAM GPS ANTENNA | THINKWARE Australia Can you please quote? Need another quote for a second Dash Cam hard wiring install only for a Kia Cerato

Need a head unit installed in my mercedes currently old unit removed and ha e new unit on hand

My car already has an after market head unit in it but upgrading to one with Android Auto. The unit I'm buying came with a bonus reverse camera so bonus points if you can do that as well! 2010 Honda CR-V

1) Install aftermarket Head Unit (CJ Industries) into a 2020 Honda Fit recently imported from Japan. 2)Change the instrument cluster language from Japanese to English.

Needa custom headunit for px1 ranger

I have a 2008 530i BMW and I’m interested in having the unit installed

Head unit install and reverse camera

Installation of: apple car play head unit parking camera Dash camera

Ive had enough. Ive done that much shit and still can’t figure it out. Im so close yet so far so now I just want someone to come do it. Got all the harnesses (I assume) so just bring your brains, unless you can spot what’s wrong in the photos and be genuine enough to tell me whats wrong. NOTE: This is a chinese aftermarket unit & you will not be fully paid if you cannot figure it out

Need someone with knowledge/experience to install a new apple carplay head unit and reverse camera into my 2011 nissan navara d40. Unfortunately don’t have the time at the moment to do it myself due to uni so looking for someone who can. Will need to bring their own equipment (multimeter, wire stripper etc, wire connectors). Should be an hour or so job if you know what you’re doing. Headunit to suit car is provided.

Purchased a CARABC Wireless Carplay box For Peugeot 308 (2017) Needs installing. Can confirm car is SMEG system.

Looking for an auto electrician to install a Sony head unit and sub

Hey, looking for someone who knows how to install car head units. I’ve got an Android head unit with wireless CarPlay/Android Auto for my 2008 Toyota Corolla hatch that needs installing. It also comes with: Reverse camera ADAS dash cam External microphone Everything is already here, just need someone to install it and make sure everything works properly (camera, CarPlay, etc). Prefer someone who has installed these before.

2011 Mazda 3 Neo (BL) – Head Unit, Reverse Camera & Front/Rear Dashcam Install - Non-Bose / non-amplified car model. - Preferred install date: 23 Feb onwards (flexible if needed) Parts Supplied by me: • Pioneer DMH-AP6650BT — Head unit • Aerpro AKMZ4 — Fascia kit • Aerpro APP8PIO9 — Pioneer harness • Pioneer RCAMAVIC — Reverse camera • Viofo A229 Plus — Front & rear dashcam • Viofo HK4 (USB-C) — Hardwire kit SCOPE: Head Unit: • Install using supplied fascia & harness • Retain steering wheel controls • Route USB into centre console (secured, not loose) • Mount microphone near rear-view mirror or high on A-pillar Reverse Camera: • Mount centred above number plate • Wire reverse trigger correctly (auto-switch in reverse) Dashcams: • Front camera high centre behind rear-view mirror • Rear camera high centre on rear glass • Hardwire using supplied HK4 via fuse tap (ignition/ACC preferred) • Concealed wiring, no loose trim Clean, factory-style install with everything functioning correctly. Please confirm any: • Experience with Mazda 3 BL installs • Workmanship warranty (if offered) • Availability from 23 Feb onwards Budget set, open to discussion based on experience and quality

Hi I am in Mount Waverley with a Toyota kluger Grande 2014. I have done lots of research and got a head unit, etc. To be installed, list is: 1) install new head unit, it’s built for my car model, with all the required cables 2) install dash cam 3) run media player (in the roof for kids) aux out to head unit 4) install new 4 channel amp 5) run the 4 channel outputs, subwoofer and coaxial out from head unit to the amp, in the boot. Rewire/ run the speaker cables accordingly. The extra cables is for a dsp at a later date. Please supply the cables, something nice. 6) install new focal flax evo speakers for the front (to be purchased) 7) dampen all four doors A quote and some advice will be awesome.

Install head unit and rewire to factory settings

I’m looking to install an aftermarket head unit in my Nissan Micra 2011 Ti Automatic, along with reverse and front cameras. I have already purchased the Mekede Dudu7 head unit, as well as the cameras, fascia/frame, and all required wiring for installation. According to the manufacturer’s technical support, everything needed for the installation has been provided. However, I’m happy to consult and discuss further if any additional parts or requirements are identified during the process.