Find and experienced emergency locksmith in Melbourne

Locked keys in car. Need a locksmith

Need help fixing my car key remote. The unlock button is not working when pressed, but the lock button and boot/trunk open button are still functioning normally. Looking for someone who can diagnose and repair the issue.

Hi, I need a replacement car key for number 672OD2 Vehicle Identification Number (VIN) JMFXTGM4WSZ013713 Description 2025 MITSUBISHI OUTLANDER WAGON. Need a eta and price, thank you

I have my car, a 2015 mitsubishi ASX, and the key has been acting up. It starts the car normally but distance locking/unlocking is on and off. After I try to re-sync the key it works but as soon as I put it back into the ignition, the fob refuses to work again. I’m guessing I need a new key and the programming needed along. I’m happy to use the same key blade as the one I have right now; it’s an after market anyway. Alternatively, if you could repair the one I already have, I’m all good with that…whatever option is the cheapest. Let me know approximately how much that would cost me…money is a bit tight at the moment.

We need 4 car remote Automatic parking lock barriers re programmed for 10 remotes

Need a key replacement for 2016 Kia Cerato

Installation of 2 x Parking locks at city location carpark . surface mounted into concrete in parking spots .

Found my old car key, but I think my car computer has been configured to not accept it, need this changed. 2012 Honda Jazz Viba

2012 Nissan Maxima Automatic Here are the issues that needs to be fixed: 1. Key fob not working. I’ve already replaced the lithium battery but that didnt solve the issue. 2. Car cranks a little longer than normal only on the first start. It starts smoothly after that, but the issue is there the first time I try to start the car after the cars been off for a few hours.

I’ve lost my keys and need a new one programming for a ford fiesta 2010.

Unfortunately lost my car key and don’t have a spare so need to get a new one.

Old mercedes ignition key circuiyboard needs switchs replaced. I have the parts

Keys are locked inside Renault Scenic and do not have spare set.

Replace door lock actuator in tarago car

Install 2 Raven RP8si Automatic Door Bottom Seals to the bottom of two doors. Details of the product here: https://www.accesshardware.com.au/raven-rp8si-automatic-door-bottom-seal-clear-anodised-aluminium

I need a Prius key programmed to Prius Toyota 2005 .

I have a car key cut and lock/unlock working. I am looking for someone to programme the new key to my car.

Mazda 2 2008 looking for a new car key

Need a locksmith that can make a replacement key for a Holden 4wd Trax on the spot

I need a qualified locksmith or installer to remove the existing lock (Lockwood mortise lock on a glass/metal-framed office door) and replace it with a smart access system that supports: Fingerprint access, or RFID card / FOB access The current lock is a mortise-style lock installed on a commercial framed glass door. Photos of the existing setup are attached for reference. You will need to: ✔ Remove current lock hardware ✔ Recommend a compatible smart lock model that fits this type of door ✔ Install and fully test the new lock ✔ Ensure the latch aligns properly and the door closes smoothly ✔ Provide basic setup help (adding fingerprints/cards)

Need help fixing my car key remote. The unlock button is not working when pressed, but the lock button and boot/trunk open button are still functioning normally. Looking for someone who can diagnose and repair the issue.

I have a door lock where the handle and latch mechanism aren’t working properly. The latch seems misaligned or isn’t retracting/engaging correctly, and the lock slider/button may be loose or jammed internally. The handle may also be sagging slightly. I’d like a quote to inspect, repair, or replace the lock/latch mechanism if needed

I lost the passcode and please reset and make it working，125kHz RFID tag is working Please see the photos attached

Need a handyman to come and fix a sliding door lock so that it sits flush, and install a cupboard latch.

Front door is no longer closing, the ask is to fix door so it closes correctly and potentially change any locks that are needed. See images

Nails have come loose and lock mechanism stuck on our sliding door. Need fix or replacement. See pictures for more info

We need help fixing two door/lock issues at home. One door does not stay closed properly. It does not need to be key-locked, but currently the latch does not catch properly and the door can open by itself. Another door has a key broken inside the lock. We need the broken key removed and the lock checked/repaired if needed. Looking for someone with locksmith or door/lock repair experience. Please bring the tools needed for key extraction, latch/strike plate adjustment, and basic lock repair.

Lock need repair or replacement

Job 1: Adjust misaligned door strike plate so that lock bolt sticks (without removing door as very, very heavy); Job 2: shove second door which is jamming

We have a troublesome door to an upstairs balcony that needs repair. The lock and now spindle are not turning at all. We tried removing the handle and still can’t turn the handle. Need a locksmith, carpenter or handyman to help me firstly open but ideally also diagnose and fix the door issues because this has happened a few times already before. See attached photos for the mechanism. to access the outside, if we can’t get the door open, you will need a ladder to get onto the balcony. It’s probably about 2.5 off the ground to the balcony, fairly straightforward to access with a ladder but we don’t have one here unfortunately. So please bring a ladder just in case. If it needs new hardware please let me know. I think it’s probably an alignment issue. We are selling the house, ideally today but any time before Wednesday is fine - Wednesday is the next inspection.

2 door locks are loose and 1 is stuck

I need the lock for my back security door fixed. The bolt trigger isn’t retracting enough to signal release the bolt to slide in. I’d also like a sensor deadbolt/code security lock to replace the existing mechanism on my side gate. Just the ones you can buy from Bunnings. Price excludes materials.

My dog jumps up and opens the door from the inside when I’m not at home I want to prevent this from happening so I need the door handles and lock replaced to make it some sort of deadlock that she can’t unlock when I’m not at home she’s a smart dog I will fund buying the lock and handle it necessary

Need door fixed - handle broke up and door not closing properly. 3570 series mortice lock Need new black handles

Door lock in an apartment building on collins street - Melb cbd needs fixed. (without breaking the bank) Locks/ unlocks fine. Lever also works perfectly. It’s just coming out a little from the inside - (while fixing it, a small nail was snapped stuck inside - which fits the lock to the door) so it was working like this forever. Need it fixed before i leave for a holiday

I had a smart lock on here that was working fine for months today I went to turn it and it didn't unlock very well... The doors fault bot the smart lock. I noticed that maybe something's come loose or there's something a little crunchy when I open the door and it's not properly opening and closing to the door. For now I've removed my smart lock which is seen in the picture, but still the door handle not opening and releasing the latch remains.... Happy to have a look to see if we can fix it or happy to replace it the handle that is the Smart Lock works fine. Need this today as right now I can't properly close the office so this is pretty urgent.

Looking for a handyman to fix a misaligned door lock on the front door. The door closes but the latch doesn’t line up with the strike plate, so it won’t latch securely.

Apartment door locks when it’s open, but can’t lock when it’s closed. Not sure what the issue is, but think it might be related to the closing arm

Fix bathroom door lock handle? Not closing/locking

Hi, I need someone to fix an internal door handle. When you turn the handle, the latch bolt (the piece that goes in and out of the door frame) doesn’t retract, so the door won’t latch shut. It should be a simple job — the internal latch mechanism is jammed and just needs to be released or replaced. Photos attached. Richmond location. Flexible with timing. Thanks.