Find and experienced emergency locksmith in VIC

Lost only remote keyless push button car

Looking for an experienced gate automation / smart access installer to help complete and troubleshoot our front fencing and gate setup in Hawthorn East. We’ve recently had major fencing and gate works completed, however we now need someone skilled and practical to come in and properly finish the automation and smart access side of the project. Current setup includes: • Sliding driveway gate • Pedestrian gate • Existing electrical wiring already installed for the sliding gate motor • Smart lock / access hardware to be installed and configured • Wiring needing to be checked and tested • Gate automation setup still incomplete We are looking for someone who can: • Install and configure smart locks/access systems • Assess and troubleshoot the existing wiring • Connect and get the sliding gate motor operational • Help integrate keypad/fob/WiFi/GSM/intercom access if possible • Ensure gates are functioning safely and reliably Ideally seeking someone with genuine experience in: • Automatic gates • Sliding gate motors • Smart entry systems • Low-voltage/access control wiring • Gate automation troubleshooting This is not a simple fencing job — we need someone solutions-focused who understands the technical side of automated gates and smart access systems. There may also be some minor tidy-up/correction work around existing installation details depending on capability. Please message with: • Experience/photos of similar work • Availability • Location • Whether you supply automation hardware or install customer-supplied products Would really appreciate someone reliable, detail-oriented and capable of helping bring this project over the line properly.

Mercedes ML500 , 2003, key broken, have blank needs to be re keyed , have remote . This is my offer: pls let me know your best price,

Need a spare key for Holden Captiva 2015 active(Aftermarket ok)" Budget $100~ $200

Hi, I need a replacement car key for number 672OD2 Vehicle Identification Number (VIN) JMFXTGM4WSZ013713 Description 2025 MITSUBISHI OUTLANDER WAGON. Need a eta and price, thank you

Lost car key, don't have a spare. Mitsubishi Magna 2004. Just need a metal key, no fob or anything

Honda jazz 2017 Car key cut Normal key (not push start)

Lost my car keys My girlfriend has lost my spare Bloody nightmare Need a key for my Mercedes Benz ML 250 Bluetec Can provide proof of ownership if needed Located in Mordialloc Vic 3195

Toyota corolla 2004 key replacement

Hi, I just bought a 2009 Holden Commodore Ute from auction and it came without a key. I need a quote for a new key, including cutting and programming. Please let me know the price and availability. Thanks

I need a replacement car key cut

I have bmw 2009 320d and both the key is stopped working however able to drive the car around just locking and signaling is not working

Car key cut hsv 08 programmed flip key Must supply

The lock to the side compartment on my caravan isn’t working; I think it may need replacing as the key does not turn.

I’ve lost my keys and need a new one programming for a ford fiesta 2010.

Hi, I need the current passage knob sets replaced with entrance knob sets on 4 internal bedroom doors. Photos attached showing exactly what’s there now – (no major door prep expected, but please confirm from the pics). Key details: Two of the doors belong to the same bedroom → those two locks must be keyed alike (same key works both). The other two doors should have their own keys. Happy for you to supply Brava or Carbine entrance sets (or any good-quality equivalent) and include the parts in your quote – I’m open to whatever brand you recommend as long as it’s reliable and good value. Looking for the most cost-effective quote from someone who’s done this exact job many times. Please include a quick breakdown (labour + parts if you’re supplying) in your offer. Happy to be flexible on day/time. House is in North-East Werribee , easy street parking. Thanks – Happy to clarify any questions and looking forward to your offers!

Keys are locked inside Renault Scenic and do not have spare set.

Hi guys, I have a few doors that need new locks installed as they are getting flimsy. Please ask any questions

Need extra key for a Toyota Kluger , just purchased and came with one key. I have one function key and remote control.

Hi, I’m locked out and need help getting back into either my bedroom or car.

We have lost the mailbox keys shown in the attached image and would like to repair or replace the mailbox using the most cost-effective solution available. The job may include supplying and installing a new mailbox or replacement keys

My walk in closet had a loose door knob and now it fell off from behind. I’m locked outside of it.

Looking for a reliable and experienced handyman/technician to fix a door lock. This job is part of SDA / Accessibility Compliance works so it’s important the repair meets appropriate safety and usability standards. 🛠️ Scope includes: Front Door Keypad / Code Lock - Investigate and repair the front door digital lock/code entry system as the access code is currently not working. - Confirm lock functionality and ensure access codes operate correctly. Notes: - Potential for ongoing work Please confirm in your offer: Your experience with similar repairs Repair works must be completed to a good standard as they are required for final compliance/inspection. Thanks in advance.

Hi, need to fix the locks on 3 grill mesh security doors locks. Doors are fine just the locks need fixing. See the photo attached. Need it done urgently

Lock mechanism not turning properly need to fix lock and also have a look at front door lock

Need a handyman to come and fix a sliding door lock so that it sits flush, and install a cupboard latch.

Front door is no longer closing, the ask is to fix door so it closes correctly and potentially change any locks that are needed. See images

My lock isn’t working, it’s hard to get the key out when I put it in Yesterday a family member tried to unlock the door when there was a key on the other side and that ruined the lock

2x door locks come loose ( displaced)and garage door making beep sound

I need a handyman or locksmith to replace an existing lever handle and deadbolt on a timber entrance door with a new Smart Keypad Lock (hardware provided). Scope of work includes: Removal: Remove the existing silver lever handle and the deadbolt above it. Installation: Install the new Smart Lock system (vertical keypad style). Strike Plate Fix: The current door bolt/latch is a bit "light" and doesn't align perfectly. You will likely need to reposition or slightly mortise the strike plate on the door frame so the new lock engages securely and smoothly. Testing: Ensure the door locks and unlocks without needing to pull or push the door forcefully. Materials: I have the new Smart Lock set and the manual (as shown in photos). You will need: Your own tools (drill, bits, wood chisel, and potentially longer security screws for the strike plate). Photos attached: Current door hardware (Red door). Existing strike plate and frame. New hardware in box.

There is a letter box which has a lock mechanism and it needs to be fixed. So lock works correctly.

Front door latch is very hard to open from inside. Seems to get stuck unless I manually press it in a bit with a screwdriver or my finger (if door is open). Fine to open from outside with key.

I’ve partially installed a Lockwood deadlock on my front door but need someone experienced with door locks/deadlatches to properly finish and align it. Current issue is the key will not release/remove properly once turned, which makes me think either: the tailpiece/cam alignment is slightly off, the lock body isn’t seated correctly, or the cylinder/turn assembly needs adjustment. Most of the install is already done. I just need someone who understands these locks to: inspect the fitment, align and adjust the mechanism, ensure smooth locking/unlocking, make sure the key removes correctly in locked/unlocked positions, and finish the install neatly. May require: minor adjustment/trimming, repositioning, checking preload/alignment on the cam assembly, and ensuring latch/deadbolt travel is smooth. Please only respond if you have experience fitting Lockwood/Whitco style deadlocks.

We have a troublesome door to an upstairs balcony that needs repair. The lock and now spindle are not turning at all. We tried removing the handle and still can’t turn the handle. Need a locksmith, carpenter or handyman to help me firstly open but ideally also diagnose and fix the door issues because this has happened a few times already before. See attached photos for the mechanism. to access the outside, if we can’t get the door open, you will need a ladder to get onto the balcony. It’s probably about 2.5 off the ground to the balcony, fairly straightforward to access with a ladder but we don’t have one here unfortunately. So please bring a ladder just in case. If it needs new hardware please let me know. I think it’s probably an alignment issue. We are selling the house, ideally today but any time before Wednesday is fine - Wednesday is the next inspection.

A lock on a back French door is very difficult to turn and lock.

I need the lock for my back security door fixed. The bolt trigger isn’t retracting enough to signal release the bolt to slide in. I’d also like a sensor deadbolt/code security lock to replace the existing mechanism on my side gate. Just the ones you can buy from Bunnings. Price excludes materials.

Front door Lock is loose & doesn’t deadlock with the key.

Need the current front door lock removed, and smart lock installed Photos of the current door lock and smart lock attached

Fix jammed door locking mechanism. For some reason it won’t unlock. It turns but won’t unlock. It also feels jammed.

Key gets stucked in the lock. Hard to take out.