Find and experienced emergency locksmith in Melbourne

2012 Nissan Maxima Automatic Here are the issues that needs to be fixed: 1. Key fob not working. I’ve already replaced the lithium battery but that didnt solve the issue. 2. Car cranks a little longer than normal only on the first start. It starts smoothly after that, but the issue is there the first time I try to start the car after the cars been off for a few hours.

I’ve lost my keys and need a new one programming for a ford fiesta 2010.

Unfortunately lost my car key and don’t have a spare so need to get a new one.

Old mercedes ignition key circuiyboard needs switchs replaced. I have the parts

Keys are locked inside Renault Scenic and do not have spare set.

Hey guys, My front door is a nightmare to lock, it opens and closes fine but when we lock the door it needs to be lifted otherwise it won't lock, usually happens in summer but would like this issue rectified so it doesn't continue. I have attached some pics! Thanks!

Replace door lock actuator in tarago car

Install 2 Raven RP8si Automatic Door Bottom Seals to the bottom of two doors. Details of the product here: https://www.accesshardware.com.au/raven-rp8si-automatic-door-bottom-seal-clear-anodised-aluminium

I need a Prius key programmed to Prius Toyota 2005 .

I have a car key cut and lock/unlock working. I am looking for someone to programme the new key to my car.

Mazda 2 2008 looking for a new car key

Need a locksmith that can make a replacement key for a Holden 4wd Trax on the spot

I have my car, a 2015 mitsubishi ASX, and the key has been acting up. It starts the car normally but distance locking/unlocking is on and off. After I try to re-sync the key it works but as soon as I put it back into the ignition, the fob refuses to work again. I’m guessing I need a new key and the programming needed along. I’m happy to use the same key blade as the one I have right now; it’s an after market anyway. Alternatively, if you could repair the one I already have, I’m all good with that…whatever option is the cheapest. Let me know approximately how much that would cost me…money is a bit tight at the moment.

I need a qualified locksmith or installer to remove the existing lock (Lockwood mortise lock on a glass/metal-framed office door) and replace it with a smart access system that supports: Fingerprint access, or RFID card / FOB access The current lock is a mortise-style lock installed on a commercial framed glass door. Photos of the existing setup are attached for reference. You will need to: ✔ Remove current lock hardware ✔ Recommend a compatible smart lock model that fits this type of door ✔ Install and fully test the new lock ✔ Ensure the latch aligns properly and the door closes smoothly ✔ Provide basic setup help (adding fingerprints/cards)

Some time ago I lost my first set of car keys and never got around to replacing it - I have since lost my second (the only spare) pair and am now unable to get into my car. Freaking out a lil bit so I’m looking for someone honest and reliable. Cant pay more than 600

Lock in door has jammed and won’t unlock and door handle has slightly come off

I locked my car with the key inside need to open asap

Car lock has been damaged by thieves and barrel to be replaced

I have a door handle which doesn’t have a lock. I just need someone to help me put a lock on it which I have ordered from amazon

Actually I lost my car keys and I want to get new car keys. If any lock smith can help me to make my car keys that will be wonderful. As I am not working if someone can make 1 key for $ 100 as car is unlocked and car is located in flemington. Need to be done ASAP Thankyou

My window does not lock when I slide the latch

Internal door lock is broken - the lock won't fit into the hole. The lock itself works fine, the key is able to twist & turn it - we need a fix or a new solution for this door. Note: we are a pilates/yoga studio and this door is located inside our 'hot room'.

Reattach door lock mechanism for sliding door. One screw has come undone (it is still in the mechanism) see photo

2012 Nissan Maxima Automatic Here are the issues that needs to be fixed: 1. Key fob not working. I’ve already replaced the lithium battery but that didnt solve the issue. 2. Car cranks a little longer than normal only on the first start. It starts smoothly after that, but the issue is there the first time I try to start the car after the cars been off for a few hours.

Main door lock need to be repaired

Bathroom door lock not working needs fixing

Old mercedes ignition key circuiyboard needs switchs replaced. I have the parts

The locking mechanism on the security door has become extremely hard to operate and, while it still operates, the latch has come loose from the door.

Looking for a handyman/locksmith to repair a broken door lock/latch on a security door. Door currently does not lock securely. Tasks may include: Replacing the lock (please advise before proceeding cost ) Requirements: Experience with door locks/security doors Own tools Able to supply parts if needed (cost reimbursed separately or included in quote)

Fix bathroom door lock handle? Not closing/locking

Hi, I need someone to fix an internal door handle. When you turn the handle, the latch bolt (the piece that goes in and out of the door frame) doesn’t retract, so the door won’t latch shut. It should be a simple job — the internal latch mechanism is jammed and just needs to be released or replaced. Photos attached. Richmond location. Flexible with timing. Thanks.

Clipsal dimmer working perfectly fine but button depressed / broken per pic.

Lock in door has jammed and won’t unlock and door handle has slightly come off

I have an A&L awning window where the lockable chain is stuck shut - I think rusted. Wanting to know if it’s possible to fix this issue by just replacing the chain and lock parts.

The door lock seems to be slightly misaligned so the door doesn't close properly and can always be opened just by pushing it

Need a locksmith to come fix this door handle - no issues with the lock itself but one of the screws on the front side is loose but can’t be taken out (may have lost its grip) which is making the door handle loose.

Need to fix my apartments door. It wont lock the latch from outside anymore. Seems to work from the inside. Need it fixed urgently

Fix side door on my Mitsubishi Express 2.4 van. It’s a sliding door and seems permanently locked.

Sliding door is getting stuck and hard to open and close. Issue likely to be with rollers.

The door handle to the bathroom is locked on 1 end, despite the pin lock being released. The handle from the inside (pin lock side) is working, it’s just the handle from the outside. I think it just needs to be unscrewed and fixed as I had this same issue on the other door which a handyman repaired quickly. Need someone in asap in Southbank