Find a professional roller shutter repair in East Melbourne

Couple of roller shutters (inside eaves) on 2nd storey. One is stuck almost all the way up, motor is still going but might be ballooning in the eaves. And the 2nd one is minor, just one of the slats is misaligned (small gap between 2 slats when closed). I'm after a ballpark for potential costs.

I was wondering if you do garage Shutter doors? We have a very tight space for our car to fit into the garage so we need to change the door but the only option is a garage shutter because the box will be on the outside of the garage.

Need to fix a stuck modem window roller shutter

I need our roller shutters fixed urgently as we can’t access our balcony!! The machine seems derailed as it is rolling but not lifting the shutter!

One shutter opens a bit then stops. I can only winds it to close. Another shutter has the first few blades dislodged from rails by gusty winds.

Cord has been snapped on old external shutter (was in fine working condition prior to it being snapped by our 4 year old!). It is now permanently shut & we are hoping to get it fixed rather than removing it completely.

Need to repair roller shutter attached to window

Shutter cable has gone. Shutter stuck down. Repair quote please.

Hello We need to repair our roller shutters in Burwood Five roller shutter mechanisms are broken and need to be replaced. Just wondering if you can come over to have a look? Thanks

After someone to come and repair our Somfy brand external electric motorised roller shutter. It has become jammed halfway, now is closed and won't open. The engine still makes a sound and is running fine.

7 external roller shutters to be removed. 5 new roller blinds to be installed.

Ground floor roller shutter stuck and won't shut

Hi, could someone quote for the installation of a roller shutter for my garage? * The roller shutter will be purchased from https://www.ezyfitrollershutters.com.au/ * The product type is "fortress", it will come with a remote control * Size is about 2.4m x 2.4m, estimated total weight is 53Kg * It needs to be installed on the inside wall of the garage * Guide rails will need to be fixed to brick wall * Pelmet will need to be fixed to wood beams supporting the steel roof. * Attached please find photos showing the existing garage door. The existing garage door needs to be removed and then the new roller shutter needs to be installed at the same place. * I am not sure whether the package from https://www.ezyfitrollershutters.com.au/ will include all the installation materials such like particular type of screws. I have some common materials and tools, and have some 90x35mm structure timber * Please quote for all above I hope you have the experience of installing motorised roller shutters with wireless controls. If you've insalled the same type of roller shutters in the past, that would be great! I work from home, so the time is flexible.

I need the following to be installed on GWV.cannon XSR . https://www.ocamindustries.com.au/Retractable-Tonneau-Roll-Cover-For-GWM-Cannon-XSR-2022-Manual-Roller-Shutter

Electric roller shutter on our window has stopped closing fully. Looking for someone to fix this so that it works as intended and can close fully.

We have two outdoor roller shutters on the second floor, both controlled by a single wall switch. One shutter works fine, but the other doesn't, although the motor still makes noise when the switch is pressed. A technician previously raised a concern about both shutters being controlled by a single switch, which could have caused the motor failure, though other factors like water ingress, faulty components, improper installation, or an incorrect motor may also be to blame. We need someone to inspect and fix the issue. Please note this is on the second floor, and a standard ladder may not be tall enough.

Motor is working but not rolling blinds up.

I have a fixed window on the first floor. 1200W x 1800H. Exterior wall is render finished with polystyrene wall cladding. I am looking to install an electric windows roller shutter.

I have roller shutter (battery) and I would like to change to motor electric. It’s in the ground floor

The roller chains on two of the roller shutters are broken. I need someone to fix it as well as have replacement chains that are durable and not the cheap variety of chains which do not last