Find professional metal gate repairs in QLD

My front metal gate is not closing or locking properly after I installed a new lock. The latch is misaligned and the gate doesn’t shut securely. I’m concerned it may open on its own, so this needs to be properly adjusted and secured. This is a safety issue as I have dogs and need the gate fully secure. The lock is already installed but likely needs: • Realignment of latch/strike plate • Adjustment of the gate • Proper securing of fittings • Possibly minor drilling or repositioning Looking for someone experienced with gates or general handyman work. Would like this fixed ASAP. Located in Mountain Creek.

Need a handyman to repair a damaged gate hinge. The gate is metal, attached to a wooden post (see photo).

I need a regular sized (I will supply) metal gate about 800 x 900mm installed on either side of the house to an resisting fence so I can divide the front yard from the back, The supporting posts will need to be cemented in for this project. All posts and cement supplied.

Hi there! I’m looking for a handyman to help with two small repair jobs at my property: 1️⃣ Metal gate: The ground bolt (drop bolt) has come off and needs to be reattached or welded back to the gate. Also hoping to make the gate more secure so it can’t be opened easily from outside — open to a simple, low-cost solution (like adding a padlock latch or better locking setup). 2️⃣ Timber fence: Around 7 fence palings have come off or become loose and need to be nailed or screwed back to the horizontal rails. Please bring your own tools and materials (screws/nails/welder if needed).

Take gate off fix bends and straighten bent post in site. Sandblast and powder coat gate frame Supply 4 x lysaght 1800mm 0.42 BMT zincalume steel custom orb corrugated steel cladding 1800mm Supply new heavy duty hingers as required zenith zinc plated ball bearing 3 x hingers Welding will be required

I need to put in a couple of gates into the front and side of the property. Currently there is a half height gate ( 1m wide gap including posts and gate);at the enterance, I would like to make if full height. To the side.of the property there is a approx 1.8m wide space which requires a full height gate and panel. Happy to discuss design and materials, slatted black metal is what I'm hearing from the boss.

Two large metal gates have been damaged in high winds and at least one will need replacing.

Bifold heavy metal gate came off from top which was holding by a metal slider

I need this fixed before the realestate show the property next Wednesday.

I would like a metal security gate acid dropped or sand blasted to remove paint and rust. 210cm x 110cm. I am located in Camp Hill so can be done on-site or taken away to be done. If the price is unrealistic then please advise what the cost would be please as I have no idea. Thanks

frame holding a metal privacy gate needs repair

Prepare and paint exterior metal gates

Looking for builder/handyman to remove and dispose of 2 x iron/metal gates (and fittings) as pictured. Carport gate is 2400 x 2000 and side gate is 2000 x 1000.

Iron fence was damaged by car. Need to fix.

Needs to be about 1.2 wide x 1.5 high! My dog keeps breaking through the wooden gate so needs to be strong

Gate needs to be lifted to close properly so needs some adjustment so it closes on its own and locks

Front gate lock (built into the handle) and latch no longer hold. The gate and frame are all metal. I need tge lock and latch repaired.

An open design metal gate about 1m in front of the entrance door of a new town house. There are several options for installation. Width of opening 1.2- 1.5m.

Small dents in the edge of a metal gate

Gate kit install on timber fence Will need someone with some wood cutting tools/skills. Have timber and gate hardware already