Find local furniture repair handymen in NSW

I have built Ikea wardrobe but having issues installing the doors, they have gaps so something is not right. I’m sure it’s an easy fix for someone that has done this before. I have all the parts ready to go.

I need someone to help with the following: FIX to wall - 2 x IKEA wardrobes (already assembled) Just need to be fixed to wall, for safety Task: - Drill hole in wall - Fix wardrobe using bracket supplied by IKEA Location - ULTIMO NSW 2007 Parking and lift access Please quote Quick job, convenient for a local in the area

My IKEA Songesand double bed was put back together poorly by removalists after a recent move. It is already built, but it’s very loose and wobbly. I need a handyman to come and fix it properly so it’s stable and safe again. The Details: The Job: Tighten all joints and fix any assembly errors. The Model: IKEA Songesand (about 20 months old). Manual: I have the PDF manual I can send you. Tools/Parts: Please bring your own tools. Some screws may be missing or loose from the move, so please bring some spare furniture hardware if you have it. Looking for someone who is good with IKEA furniture and can make sure it doesn't squeak or wobble.

Task: Buy & cut wooden panels to replace IKEA slats + install anti-vibration pads I need help fixing my IKEA MALM queen bed frame with the LURÖY slat base. Current issue: The existing IKEA LURÖY slats move and fall out of place with any movement, causing instability and noise. Proposed solution: Replace the current slats with three custom-cut solid wooden panels and install anti-vibration pads underneath to eliminate movement and noise. Scope of work: • Purchase suitable plywood / timber panels (approx. 20 mm thick) • Cut into 3 panels, each approximately: • 152 cm (width) × ~67 cm (depth) × 20 mm (thickness) - let me know opinions here • Remove existing IKEA slats • Install the 3 panels across the bed frame (using the existing centre beam) • Add anti-vibration / rubber pads between the panels and the bed frame rails to stop noise and movement • Ensure panels sit securely and the bed is stable and quiet Notes: • Bed size: Queen • Bed frame: IKEA MALM • Panels should replace the slats entirely • No structural changes to the bed frame required See photos of existing base, current slats and proposed solution

Assemble a couple of pieces of ikea furniture - chest of drawers, cabinets for kids, table for kids etc

Hi there, I am posting this on behalf of my manager, who is looking for someone to complete the following tasks this Saturday at a property in Balmain: • Hang three roller blinds • Install one shelf • Repair an IKEA cabinet door that has come off its hinges Please let me know your availability. Thanks.

I have an ikea drawer system that is not fitting together.

My IKEa couch has four springs that have popped out, three of these still have the accompanying clips needed to hammer it in. Need someone with knowledge on disassembly of IKES couches and the appropriate tools to reinstall the springs so we can sit in that section again

Fixing ikea drawers chest of 6 drawers....only drawers to be fixed no wall mounting

The screw holes on the bed head have been snapped/broken so the metal bar that runs down the middle has nothing to hold on to. It will need some sort of small wooden brace underneath? Thank you

The sliding door has fallen off the sliding mechanism and wont stay up.

Need to fix up a drawer unit I got from IKEA. I assembled it myself and as expected it’s given up on me and come undone. The mirror inside is also broken and needs to be replaced.

Need to fix up a drawer unit I got from IKEA. I assembled it myself and as expected it’s given up on me and come undone. The mirror inside is also broken and needs to be replaced.

Need to ikea curtains Have all the material - curtains, track channels, hooks, wall/ceiling fixtures 1 large window - double layer curtains 1 medium window - double layer curtains 1 medium window - single layer curtains 4 small windows - single layer windows Thanks

The ikea bed broke overnight. Looking to someone to fix it ASAP today.

The sliding door on an Ikea Packs cupboard has derailed.

Require 3x Billy IKEA bookcases fixed together then fixed to wall. The bookcases are on carpet and may require shimmy. Must have experience and insurance. IKEA brackets provided everything else must be supplied.

Need to remove existing Mirror glued to wall and fix 2pcs of IKEA Hemnes Mirror Cabinet in 2 bathrooms. https://www.ikea.com/au/en/p/hemnes-mirror-cabinet-with-1-door-white-00217679/ Also need to patch up Gyprock wall damage in another room. (pictures provided).

The Ikea LACK wall shelf is not secure anymore as I leaned on it. Lack Assemply instructions from ikea website. This building was built 15 years ago- wall stucture accordingly.

Hi, I need to get a light fixing over my dining area. Light was bought from Ikea. Its a new fixture. Not replacing existing lights. Apartment unit.

Replace timber on outdoor furniture with mod wood or some other outdoor weather proof composite material.

I need some slats welded in some outdoor furniture

I need a 2 seater swing chair and also a 2 and 1 seater outdoor chairs put together. They are in the box

Build my flatpack outdoor setting. 1x lounge, 2x chairs, 1x coffee table, 1x side table.

Hi there, I need help to assemble outdoor furniture in Fairlight today. This needs to be done by 2pm today ideally. Please let me know if free- IKEA charge $150 for assembly of both items (my IKEA assembly person has not arrived). Thanks

There are a few boxes of newly delivered furniture (they are outdoor chairs, pool side chairs and day bed) that need to be built out and arranged in the alfresco area before NYE

Put together Outdoor furniture

Need 3 tables and 6 seat benches assembled that are in flat packs.

Build just two ikea chairs and one ikea couch and a small coffee table

Assemble outdoor furniture from boxes. Flatten boxes. Clear instructions are included with all. Requiring assembly are: 2 x 2 seater lounges 1 coffee table 3 x single seater lounges (example in photo)

Put together small outdoor

Have noticed some small whitish/light brownish non flying bugs crawling on my outdoor furniture (wood + polyester cushions) after the period of rain. See attached photos I'm only free before 12pm on weekends. On weekdays I have a bit more flexibility. Thanks Would like the balcony area treated and furniture treated to have bugs removed and not come back

Install blinds and curtains on 2 triple sliding doors, install lock on a cupboard, hang 1 or 2 artworks up, put outdoor furniture pack (BBQs Galore/not ikea) together, put entry console table together

Please assemble Bunnings 5 piece outdoor setting (4 chairs, 1 small table)

Install outdoor furniture legs to seat. 5 piece set with mini table.

Flat pack outdoor furniture from Amart. It’s a sunlounger with cover. 2 large boxes and needs to be set up in a certain place in garden

2 x single chairs, 1 double chair & table

Sand and undercoat already stripped outdoor furniture

Need to assemble outdoor furniture 4 pice

Should be relatively simple- around 5 pieces of outdoor furniture (a couch, shoe rack, sandpit, slide)

My wardrobe long wooden base is damaged at one end and needs to be fixed. The single wooden base runs throughout the inside of the wardrobe from one end to the other. The bottom of the base has fixed cloth hangers.

I am seeking an experienced and reliable person to complete a repair to a wardrobe Scope of Work: - Wardrobe rail repair including removal of a broken part lodged in the existing hole (photos included) - installation of the required brackets, and securing and realigning the wardrobe rail to ensure it is stable and functional. I’ve already purchased the brackets (photos included). I’ve also added a photo of what it should look like Requirements: - Ability to bring own tools - the apartment has already had an end of lease clean so I need the person to be very clean in the workspace

The rubber has come away from wardrobe mirror door

Fix sliding doors on Wardrobe

We need new hinges installed in our wardrobe as depicted. We're looking for someone to supply the hinges and install correctly. We also need a couple of screws fit into a kitchen cabinet which should only take a few minutes, and potentially install a shelf above a hot water system depending on the cost. I have the shelf, it will just need to be cut to size. We're having a baby Jan 7th, so ideally it would happen over the next few days if possible. See pictures for details.

Wardrobe sliding door stuck

My wardrobe pole keeps breaking so I need it reinforced in the middle and drilled in properly I also have a few light pictures and a light mirror that needs to be hung And I have a towel rack that needs to be installed

Fix wardrobe. There is gap left behind / under draws. Need to cut and fix plywood. Note: Plywood will be supplied.

The built in wardrobe in a bedroom has broken drawers & needs repairs

My wardrobe door has come off its slider just need it putting back on 5 minute job

Looking for an experienced handyman/carpenter to complete three small jobs before move-out: 1. Timber floor spot repair: a few small burn/scorch marks—colour-match and blend so they’re minimally visible (see photo). 2. Kitchen kickboard/plinth: re-glue/straighten and secure the loose panel at the base (see photo). 3. Wardrobe shelf: re-secure/glue and add discreet brackets if needed so it’s sturdy (see photo).

The cloths hanging rail came off from the wardrobe, needs to be fixed in 1 room. The other 2 rails needs reinforcement

I have a 3 door wardrobe one of the slinging doors is not running smoothly

I want to replace 1. broken glass of wardrobe(three sliding doors out of which one is broken) 2. To rectify the issue with track of wardrobe. Basically one door out of three is jammed/ needs lot of force to move. I don't know exactly reason behind this issue. 3. There are two other wardrobe where jammed issue is there(moving with some force).

The mirrored sliding doors in our built in wardrobes (3) are not running smoothly.

One of the wardrobe doors has come off its track and needs to be reattached. Please make sure it’s sliding smoothly and lubricate the track once fixed. Also, please tighten 2x wardrobe racks that have come slightly loose — no major adjustments needed. Materials will be paid for separately via PayID — please don’t include the cost of materials in your quote. Please have your own tools as well. Thank you!

It’s not on the rail. It’s off and sitting on the carpet. It needs to be lifted back onto the rail. Is someone around who can help?

Wardrobe clothes rail needs refixing and wardrobe doors are not sliding, need realigning

The sliding doors for my wardrobe is getting jam. Need this fixed.

I have 2 wardrobe that needs shelf fixing. I have the boards already. I need someone to cut the boards to exact size.

I need a small repair done on a Deauville Extension Dining Table (solid white cedar with a natural parquet finish). There’s a chip and scuff on the edge of the tabletop where the veneer and stain have come off — about the size of a 5-cent coin. Looking for someone experienced in timber furniture repair, colour matching, and touch-ups. The goal is to restore the area so it blends seamlessly with the existing cedar finish. What’s involved: Light sanding and prep of the damaged area Colour matching (cedar/natural oak tone) Applying stain and clear coat/lacquer finish Location: St Leonard's Access: Easy street parking, flexible with time Tools/materials: Prefer someone who can supply professional repair products

Bought these four chairs on marketplace for $500. They were very creaky. But seemed ok. Two guests have fallen through the chairs and the wooden frame has broken (2 still intact, 2 snapped). Want to find the most affordable way to restore them. If Not financially feasible I’ll just go look for something else, but I do love these chairs.

I have an Indonesian day bed that needs a light sand and clear lacquer, two Malawi chairs that need new bases, flexible on material for base currently Masonite.. would need to be jigsawed or cut to fit with little nails to secure

I have a timber coffee table and tv unit and I want it painted a darker colour

Water damaged need to restore asap to original colour and fixed

Sand and stain wooden 4 poster canopy double bed

Antique chest of drawers needs repair. Constructed without nails, the wooden joints have expanded and 3 drawers need putting back together. Side of one drawer is missing.

This dresser is solid Oregon Pine. I would like someone to please sand it back to its original tone and finish it in 2 coats of polyurethane (I will supply). I would also like new handles installed please – I will supply those too. The measurements for the dresser are: 1400 long x 840 high x 480 deep. The areas that I would like sanded/finished are: 1. The top (including sides and overhang) 2. The 4 x legs 3. The 2 x sides 4. The 6 x drawer faces (including the edges) 5. The two thin pieces on the front, below and above the drawers. There are no curved or intricate areas on the dresser – it is square and flat. I do not need the drawer boxes done, just the faces. I also do not need the back or bottom of the dresser done. It is just too dark for our current house, so we would like the exterior returned to the original soft pine colour. I have hand-sanded a little discreet patch and it was easy to remove the current dark stain. The timber is beautiful old reclaimed Oregon Pine. The furniture itself though is not antique. It also doesn’t require any repairs. You are welcome to complete the job on site (outside under cover) or pick up and return it at a time convenient for you. In your offer, please provide a total figure (including Airtasker fee). Please also provide an estimate for how many hours of work you expect this job to be. Thank you!

I’m going away in a week and need someone to help me finish this unit! They need to sand the cabinet back to its original tone.

I have x2 small pieces of furniture which I am looking to have restored back to original wood and varnish - a trunk chest (used as a children’s dress up box) and a small chest of drawers.

I have picked up a set of bedside tables and a dresser and want it sanded back to natural wood colour with a clear lacquer finish and all handles painted gold

Require furniture restorations expert (sand/ prime and apply colour varnish ) to pine wood 3m dining table and a 1.5 metre sofa table- I have the equipment required(makita sander) and can purchase the paint/ stainer if required. Can either take elsewhere to complete job or welcome to do at my residence.

Sand teak furniture cabinet tv unit table

I have a wooden buffet that I have painted in chalk paint but would now like to remove it and take it back to its original wooden condition. I did make an attempt to start but I fear I do not have the experience to remove the paint without potentially damaging the surface. Would like for someone with experience to complete the job. Am flexible with date the work can be done. Does not have to be Friday 11th June.

Seeking handy person to fixing various bits and pieces of three pieces of furniture that went through flood; including sanding, replacing broken shelves, oiling/staining wood etc 1. Library Cabinet with draws and ladder 2. Sideboard 3. Set of draws

I am a furniture restorer myself, a customer bought a set of armchairs and couch, the legs were slightly damaged in transit. Im after someone with the correct skill sets to do this on their site. 1) sand at 240, wipe 2) apply brush shellac 3) repeat steps 1 and 2 at 400 grit 4) repeat until scratches are removed or hidden (maybe require 4 coats)

Restore outdoor timber setting table & chairs. (6 chairs). Timber work is good condition. Paint very faded. Would like sanded back & painted.

Sand a coat dining table Furniture restoration experience essential - Due date: Flexible

Queensland Maple timber table has split along a joint and needs to be repaired. Please include references for similar completed work. - Due date: Flexible

I have a wooden bed frame that has sustained damage. The corner joint where the side rail connects to the footboard has come apart, causing the frame to lose stability and support. I need the frame to be repaired so that it is stable and can support the mattress and weight without collapsing. - Due date: Flexible