Find local power point installers in Sydney

Hi, I need a licensed electrician to add 4 extra power points in my apartment. I’ve attached a floor plan: existing power points are marked in blue, and the spots where I’d like new ones added are marked in red, if possible. They’re in a few different rooms, including bathrooms. There are existing power points close to most of the new locations, so I’m hoping it may be possible to connect from those, but you’d need to inspect and confirm. Most of the walls are probably plasterboard, but the bathrooms have tiled walls, so I’m looking for the neatest possible approach. The work needs to be done cleanly, with no damage to the walls or bathroom tiles if possible. I’m looking for a quote and advice on the best way to do this. Please only respond if you are a licensed electrician. Please include your NSW electrical licence number in your offer and confirm that you can provide a Certificate of Compliance for Electrical Work (CCEW) after completion.

Electrician needed to install 2 power points in gyprock wall, directly above current outlet. First power point is to be moved from floor to desk height. Second is required inside cupboard (directly above) to power my strip light. Some drilling required. Power is already in that corner. My new desk covers the existing point but joinery person said you’ll be able to find it in the wall as it’s already in that corner. I will need you to supply the 2 double power points as well.

Our sunroom doesn't have a powerpoint so we need to add one. the closest powerpoint is 3.5 meters away. You'll also need to finish drilling through the hole in the wall it doesn't go all the way through. I need a quote with everything included so there are no extra charges on the day. Happy to provide more information if you need.

I need 1 powerpoint installed in a wall to existing power. There is access to behind the wall through a manhole under a raised mezzanine

Looking for a licensed electrician available today for a quick job in Botany. All fittings are supplied and on site. Job 1: Ceiling light replacement (x1) • Remove the existing twin fluorescent batten fitting (cover and tubes already off, wiring exposed) • Install the supplied SAL Decord SL2112/40TC LED Oyster (30W, black, dimmable, IP44) Job 2: Power point replacement (x2) • Replace 2 existing grey/silver double power points with the supplied Deta X6 Series Matt Black double power points (quick-fit base) • Same-for-same swap, no new circuits or relocation Requirements: • Must hold a current NSW electrical licence (please include your licence number in your offer) • Must be available to complete today Photos attached of the existing batten, the new light and the new power point.

Need to fix a power point that came loose from the wall. The power point itself seems intact and is working, but the wall/plaster around the opening has cr​​umbled a bit so the power point can no longer be held securely in position. See photos. The mounting needs to be secured or reinforced from behind the wall so it can hold the power point. Looking for a licensed electrician to inspect it and securely refix the existing power point, using an appropriate backing/mounting solution if required. There is access to the cavity behind the plate.

Need light bulb change and power point checked.

We’re looking for a licensed electrician to carry out several jobs in an older semi-detached house: * Install 4 new ceiling light outlets in the corridor (good roof cavity access available). * Install 2 outdoor lights at the front entry, connected to 2 motion sensors. * Install 2 new power points in a bedroom (under-house access available). * Install 3 new power points in the living room: * 1 behind the TV * 1 beside the TV * 1 at a separate location in the room. The house has good access via the roof cavity, and I can assist with access underneath the house. Budget of $750 is indicative only as I’m seeking quotes. Please provide your price for the complete scope of works and let me know if you’d like photos before quoting. Licensed and insured electricians only, please.

Looking for a licensed electrician to install approximately 10 new power points at my property. The property will need to be inspected first to assess the existing electrical setup and proposed locations before the scope of work and cost can be confirmed. Approximately 10 new power points are required, but the exact number and locations will be confirmed after the inspection. Please provide a quote based on the required work. Licensed electricians only.

2 broken power point covers need to be fixed

Licensed electrician needed – extend 2 power points 230mm forward I am installing a new stud wall approximately 230mm in front of the existing wall. I need 2 existing power points extended/repositioned so they are installed in the new stud wall, approximately 230mm forward from their current position. * 2 existing power points * New stud wall * Approx. 230mm extension required * I do not have the new mounting boxes – electrician to supply suitable boxes and materials * Existing power points are working * New wall/studs will be ready for the electrical work * Reconnect, install and test both power points * Please include all materials and labour * Licensed electrician only Please quote for the complete job and provide the required electrical compliance documentation. I can supply additional photos of the existing setup if required. It would require two visits. First to extend the cable and second visit to return and install to the new wall. Parking available on site

We need this power point re attached the wall and a fluorescent light

I need to replace a PowerPoint on my kitchen stovetop, to power button is damaged on the existing one

Power point on wall in my house, all of suddent doesnt have any electricity

Create new Power socket in balcony

The wall surrounding power point gang plate has been pushed in cresting hole. It needs a fix before end of lease! There are two of these.

I’m looking for a licensed electrician to: *Replace two existing power points/sockets *Check and fix an outdoor sensor light that is not working I’m looking for a licensed electrician to:

We are looking for an electrician that can install 6 x power into joinery and 5 power points into plaster wall. All holes are already cut in plaster and joinery. Labour only. Materials are on site. We have installed some new desks into an office and there is existing power from old desks so there is a loop from an existing power point through the joinery already. You will need to. Fit off of power points. Wire 3 loops into existing power points. To liven up. Must have electrical licence. Easy access to job. You can park 10m from the work location. Plenty of parking. No stairs or lifts.

Looking to install a power point on the wall in the picture, in the middle of the two mirrors, please only licensed electricians. Can either do Monday 25th of May or Saturday 30th of May.

Need a licensed electrician to install a weatherproof outdoor power point on my apartment balcony. The new outlet would be installed underneath the existing AC unit area. There is already an internal powerpoint located directly on the inside wall, which is connected to the existing AC circuit, so I believe the new outlet can likely be run from there. Job should include: Supply and installation of outdoor weatherproof powerpoint Safe connection to existing circuit Testing and compliance The job appears relatively straightforward with easy access and should take approximately 1–2 hours. Please only respond if you are a licensed electrician and can provide licence details if required.