Find local power point installers in Baulkham Hills & Hawkesbury

Bedroom TV Wall * Install a recessed TV wall box (supplied by me or included in quote) suitable for: * Double power outlet * TV antenna point * Data/CAT6 point * Position box at TV mounting height. * Relocate/extend existing cables if required. * Leave ready for future wall-mounted TV installation with hidden cables.

Looking for an experienced and licensed electrician to complete the following works: Existing Wall in hall * Remove/dummy off electric board behind wall in compliance with Australian standards.. Are you a licensed electrician for the electrical work? Requirements * Licensed electrician required for all electrical work. * Please include labour, materials and disposal in quote. * Photos attached.

1. Internet to me moved from level 1 to ground floor. 2. Installation of TV in pergola. 3. Two new power points in pergola

Hi, I am looking for a licensed electrician to perform a minor electrical upgrade at my residential property in preparation for an EV charger. Scope of work: 1. Replace an existing 20A single-pole MCB (pure circuit breaker) with a new 20A Clipsal MAX9 Slim RCBO (Type A, 30mA, C Curve, 1P+N). 2. The electrician will need to locate the dedicated neutral wire for this garage/laundry circuit from the main neutral bar and correctly wire it into the new RCBO. 3. Replace the existing standard 10A double power point in the garage with a 15A single power point. 4. Run a delicate 2.5mm tps line from power board to garage power point, about 20-25metres. Materials provided by me: - 1 x Clipsal MAX9 20A Slim RCBO (MX9R3120) - 1 x Clipsal Iconic 15A Single Power Point Outlet What you need to provide: - Your own professional tools, testing equipment, and any minor consumables (e.g., a short length of neutral wire for the RCBO line input if needed). - Must provide an Electrical Safety Certificate (CCEW) upon completion. Requirements: - Must be a fully Licensed Electrician in NSW. Please provide your license number when making an offer. - Excellent reviews on Airtasker for electrical work. Photos of the current switchboard, the existing line (2.5mm² TPS), and the new materials can be provided upon request. Looking forward to your offers. Thanks!

Need licensed electrician to do Electrical work: - supply, wire and install 2 x weatherproof power points off existing circuit - Supply, wire and install 1 x double power points inside house off exisiting circuit

I need a PowerPoint installed in the room (‘marked in green) where there is already a PowerPoint at a different location (marked in red). There is also a switch board behind this green marked wall. So 2 options to get the wire for power point on the green marked wall.

about 2 meters from existing power point

Install water proof power points for smart toilets

Install a power outlet to the kitchen from the power box the box is 10 meters away from the outlet location on the other side of a double storey house

No power pounton the wall to connect my tv.

Looking to install 2 power points in garage and a LED light

I need a licensed electrician to install a power point under the kitchen bench inside the cabinet for my gas cooktop. The lead is already inside the cabinet. There is a power point on top of the bench which is likely where a new one needs to be pulled from. I’ve attached some pics. Happy to share more if required.

Relocating 3 PowerPoints in the same room on ground level in a 2 Storey home

Installation Requirements 1. New Power Line Run a new dedicated power line from the existing living-room wall outlet to the opposite wall (approx. 4 metres). Purpose: Hi-Fi audio equipment. 2. Cable Specification (Hi-Fi Preferred) 3-core solid copper TPS 4 mm² oxygen-free copper (OFC) conductor Must comply with AS/NZS 3000 wiring rules. (If 4 mm² is not permitted, please use the closest compliant option.) 3. Power Outlets Install three new wall outlets at the new location. Use reputable Australian-standard brands such as: Clipsal (Schneider Electric) Clipsal Iconic / Classic Series HPM (Legrand) 4. Additional Notes Preferably run on ac clean or dedicated circuit if possible. Ensure proper earthing and low-noise installatio

Looking for an electrician or experienced handyman to replace a few cracked wall plates in my home. Work required: • Replace 1 x light switch wall plate • Replace 2 x double power point wall plates • Ensure all switches/outlets are secured properly and sit flush against the wall • Check everything is working correctly after installation The existing plates are cracked, so they just need swapping for new ones. Wiring should remain the same. Photos attached showing the current setup. I'm happy for you to supply the replacement plates (standard white) or I can reimburse for materials. Flexible with timing but would like it done sometime this week or next. Prefer someone with electrical experience (licensed electrician ideal) since power points are involved. Should be a quick job (likely 30–60 minutes).

4 x outdoor pendant lights to be changed to install Philips Hue pendants. Replace existing Philips Hue strip light with new one Check faulty power point Switch location on gang plate of 2 switches

Looking for a licensed electrician (preferably with ABN) to install a power point underneath my stove so the gas stove ignitor can be plugged in and start working. Currently the ignitor isn’t working as there is no power outlet in that space. 3 photos attached to show the setup and help understand the job. Please quote if you: Are a certified/licensed electrician Have an ABN and can provide an invoice Can bring the required materials for installation

I have two existing power points on the wall which need to be replaced. One of them need to be closed out and the second one need to be relocated to another position on the same wall.

Need to hang tv in room but power is kn the other side of room, there’s a man hole to access everything .

I need a power point moved up the wall to hide it behind the tv.