Find an experienced concreter in Melbourne

I need a Keter Manor Pent Essential 6x4 shed (1840 x 1120 x 1950 mm) assembled on my existing concrete slab, which slopes away from the house. The shed is brand new and flat-packed, and the manual is included. The job: 1. Build a level treated-pine base frame on the slab, packed on the low side, with a damp-proof layer underneath. 2. Anchor the frame to the slab. 3. Assemble the shed on the frame. 4. Anchor the shed through the pre-marked floor holes.

Small concrete cutting job. Few meters at best. 100-120mm thick aprox

Cut, demolish and remove concrete from site - it is a residential home. There are two main areas to be removed: - four 1x2m sections of driveway along the fence (for garden beds) - concrete in backyard with a few small sections to be cut and retained (see plan - this is a rough hand sketch for information, can give more detailed instructions on site). A washing line also needs to be removed. Note that there is an access constraint to get to the backyard - there is a gap of 1.2m between the garage and balcony (see photo). Someone with the machinery to get in and do a clean and efficient job is preferred. Must remove all concrete from site.

Cut, demolish and remove concrete from site - it is a residential home. There are two main areas to be removed: - four 1x2m sections of driveway along the fence (for garden beds) - concrete in backyard with a few small sections to be cut and retained (see plan - this is a rough hand sketch for information, can give more detailed instructions on site). A washing line also needs to be removed. Note that there is an access constraint to get to the backyard - there is a gap of 1.2m between the garage and balcony (see photo). Someone with the machinery to get in and do a clean and efficient job is preferred. Must remove all concrete from site.

I need a professional concrete cutter to cut this 10 sqm section of concrete into 500mm x 500mm sections with a wet saw. Appx thickness of concrete is 110mm. Access is tight so would suit a van with a walk behind petrol saw as there's water there but no power. We will dispose of concrete sections into our on site skip.

Need concrete path cut down (broken parts cut off) and 1 segment smashed up for removal. Should be about 4 straight cuts around 2m or less each.

Existing shed needs to be removed, continue the concrete to the fence and add a new shed

Adhere piece of concrete, fill cracks and match / paint balastrade, approx 3 to 4 hours in Northcote, urgent.

I need a concrete path cut into manageable pieces to remove. Someone with a concrete saw would be great but I can also hire a saw for a day. The concrete is 100m thick and has rebar in it and the tile and mortar is approx another 50mm but most of the tiles have been removed.

I need four squares cut out of our driveway concrete with no over cuts three squares 60 x 60cm one square 30 x 60cm Details: * Approx 100mm thick concrete slab * cuts already marked out the cutting lines * outdoor access * Need saw cutting and concrete removal Please provide: 1. Quote including disposal/removal of or concrete waste 2. Quote excluding disposal (I can dispose myself) Please also include: * Availability * Experience/photos of similar

I need this broken off concrete repaired.

Need this area of concrete cut and removed.

Install a 3m x 3m shed on a concrete floor in a garage. The shed has a gable roof and is 2.4 m high at the top of the gable. The sides of the shed are 2.1m high.

Need someone to cut and remove a concrete trench in a commercial shop fit-out project. Details: * Approx 35 metres long * Approx 400mm wide * Approx 200mm thick concrete slab * Ground floor access * Easy access for machinery and removal * Need saw cutting and concrete removal * Concrete to be removed and placed into the nearby rubbish pile/bin on site * No disposal required * Need core drilling for: * 1 x 125mm diameter hole * 1 x 65mm diameter hole * Commercial construction site Please provide: 1. Quote including saw cutting, trench concrete removal, and core drilling 2. Availability 3. Experience/photos of similar jobs Let me know your offer

Remove existing concrete verandah and pathway and re-set bluestone foundation and lay base for tiling

Need and edge cut along the side and concrete removed

Approx 5-6 lineal metres of concrete with tiles needs to be cut & removed. Removal is approx. 9m2 Require the concrete to be cut to a curved shape.

Need someone to cut up a section of 100mm concrete slab into smaller sections for removal by hand. I need the full depth of the slab cut. The total size of the section is 3000x800 If possible would be great to do it this afternoon

Im wanting to build a garage on a concrete slab that is able to have cars on jack-stands on it, so a thick slab with no foam or empty filler. Size will be 7.4m length by 4.2m wide with a height limit of 3m. Roller door already exists and can be used. Around 1mx6m dirt needs to be dug out and removed. Located in heritage facade proposed area, so it can’t be a butt-ugly tin garage - or at least have render over it. Neighbour is happy to remove the fence and have the garage wall as the fence, but they would like a period correct render.

We need 2 saw cuts approximately 6 meters wide in our paved driveway. We need to remove the concrete to make a trench for a new fence. The brick paving you see in the photo is laid over a concrete slab approximately 100mm thick. Can you cut the bricks and slab at the same time? We will remove the bricks if this is done by a demo saw.