Find a cladding professional in NSW

Recently re-cladded 2br house in Thirroul with Axiom cladding (pre-primed). Needs two coats (Haymes Solashield Low Sheen) to exterior cladding and additionally do the trims and fascia, balcony ceiling, and front porch area. New aluminum windows installed so no frames to paint. House ext is approx 170m2 and 1.5 story. In addition the cement sheeting (villaboard) underside of the deck needs paining (undercoat + 2 top coats), this is approx 32m2 + small front porch (pic1). The house should be relatively easy to paint (the majority is easily accessible/single story & the new cladding is vertical) with the only challenge being the back 1/3rd of the right side of the house as it is set on a 25+ degree slope and will require ladders and/or scaffolding + safety gear to paint the upper half of the wall (other side has stairs so no ladders required). I'll supply all paint. Contractor to supply all equipment and must use safety equipment as needed and be fully insured. Job to include: - cleaning/prep of surfaces - any patching (unlikely, everything is new) - undercoat where applicable (doesn't apply to exterior except for trims/fascia and underside of deck/deck ceiling) - cleanup Ready to paint, can be done anytime between now and mid December, but prefer earlier. NOTE: Pics are a mix of old cladding + new. NOTE: Interior (190m2) also needs painting, currently considering if i do this myself. Single color for both walls and ceilings (Haymes Interior matt) + enamel for skirting boards and door trims etc. Square set open plan in main area (lounge, dining, kitchen) + small hallway + bathroom (ceiling and half the wall) + 2 bedrooms (these architraves). 3m high ceilings (all interior windows are new and aluminum apart from one set in a bedroom, which are wooden and will require painting). All interior will need an undercoat, except for bedrooms. These should only require 2x top coats. Feel free to quote separately on Interior for consideration.

Remove 2 broken colorbond cladding panels and replace with new ones. I can supply material or reimburse cost of materials + labour. Each panel is around 2metres or so and is the light cladding ones not the heavier colorbond steel that surround them.

Scope - Supply and install new exterior grade cladding under the balcony (e.g., 4.5mm minimum thickness) - Cut and install FC sheets securely, ensuring clean, straight lines around the perimeter. All visible edges must be flush with the surrounding structure. - Apply jointing compound or similar to all sheet joins to create a smooth, seamless surface transition ready for painting - Silicone border where it joins to surrounding structure - Painting not within scope Access: Front of house, fully open access. Approx dimensions are: 8300mm x 550mm (widest end)

Have 9mm thick, 2400 x 1200 cladding

We have 2 outdoor rooms which we’d like cladded white. Please provide a quote and timeframe. Thank you

We have a pool currently being built. We would like to have WPC cladding installed to An existing colorbond fence. 2 x 8m fence 1.8m high

I need someone to install outdoor cladding panels on my wall

Direct stick FC board over existing fibro external wall. Area shown in orange in picture is approx: upstairs 4.5m x 3m and downstairs 2m x 2m. Apply thin (6mm or less) boards using adhesive to avoid penetrating the fibro. Cut neatly around existing doors and windows Paint with external grade paint to match existing colour. Supply all materials, access, and consumables.

Need to help to remove alfresco cladding wall and colour bond roof and reinstalled .

Quote on job Recommendation of product and secure product to wall

I need help with cladding my house. You will be working alongside my builder who you will essentially work with you to get it done.

Finish off the cladding around two external doors with James Hardy Linea Weatherboard. Joints to be sealed & waterproof. Top door requires old plywood sheet (acting as a temporary roof to lift door) to be removed and a new sheet reinstalled after the cladding is complete. Top door also requires hardwood reveals (primed). Bottom door is cladding only. I will require relevant building license, plus current insurance details. Quote is for labour only. I have a lot of materials already on-site including fixings & will get anything additional you need supplied.

I need to replace 2 x alucabond panels on a building facade in port Macquarie

Must bring own equipment. - Pressure clean a sandstone retaining wall - Wet n forget the retaining wall - pressure wash the second story wether boards and wet n forget - Clean under ceiling in alfresco area (sugar soap), moth smears on ceiling.

I'm building a new dormer. I will need someone to supply and install colorbond roofing, flashings, and snaplock cladding on the new dormer. The roof will be made ready for you (including all battens done, plywood on the dormer). Contact for plans and sizes. Is a 4.8m wide terrace and it's for just the rear part of the main roof (approx 6m x 4.8m). Scaffolding will be in place and I'll be on hand to help.

I have a Calabrese Pizza oven that needs to be installed on my fireplace/pizza oven Besser block outdoor construction (full ii nstructions available) PLUS stone cladding and stone capping fire pp lace with tiki g around pizza oven base. - Due date: Flexible

I've got all the materials. Just need so eone with good attention to detail to sand back, the lacquer the blackbutt interlock wall cladding at the front of our house.

Need replacement of one piece of cladding and ensure it is sealed.. is only one floor up with full access.. have been quoted $600 so aware of the cost

Fix back 1- Corner panel of house cladding. Single storey house. I have the panel that has come off due to strong winds.

I have a pre-existing 15m fence (see pictures). I want to leave the neighbours wood panels up. I want to clad my side with the Bunnings product linked below. Price to include installing rails onto the existing steel poles (including materials) but does not including the cladding material itself. There is also an old 1m mesh fence in about 7.5m which the price includes to remove and dispose of. Cladding material link which I will buy: https://www.bunnings.com.au/ekodeck-219-x-26mm-3-6m-carbon-batten-screen-castellated-panel_p0488949?store=6042&gclsrc=aw.ds&gad_source=1&gad_campaignid=11071326627&gbraid=0AAAAADtbEB8T1U-xi8rZOPHRsjWCSDtFb&gclid=CjwKCAjwravBBhBjEiwAIr30VF7rg5Rb4udBC6KbFguN3_nL-GRyUefwbmUM-t93CpVhGzm7mxbuYxoCBqMQAvD_BwE