Find a furniture refinishing professional in VIC

**HARDWOOD FLOOR SANDING & LIGHTER REFINISHING | ABBOTSFORD VIC 3067** Looking for an experienced flooring specialist to sand and refinish our existing hardwood floors. **Job details:** - House is 83 sqm overall (actual timber floor area smaller). - Want a noticeably lighter, natural timber look than the current finish. - Premium water-based, ultra-matt finish. - Minimal yellow, orange or warm tones. - Open to a light wash or tint if needed to achieve the desired result. **Please email:** - Rough quote or price per sqm, including materials. - Recommended process for achieving a lighter finish. - Number of coats, estimated duration and availability. Photos of existing floors available for reference. Rough quotes only at this stage. We'll discuss firm pricing with shortlisted trades.

Hi, I’m looking for an experienced handyman or cabinet repair specialist to repair/refinish two small overhead kitchen cabinet doors at an investment property. One door has significant peeling/damaged surface coating, exposing the brown MDF underneath. The adjacent door is in better condition, but I’d like both doors to have a consistent white finish. Details: • 2 kitchen cabinet doors • Approx. 75cm high × 28cm wide each • Existing raised-panel design • Prefer to retain the existing doors, hinges and handles if possible • No need to replace the entire cabinet Preferred work: • Remove any loose or damaged vinyl/laminate coating • Prepare and sand the surfaces • Apply suitable primer and durable white cabinet paint, or recommend a better cost-effective refinishing method • Match the existing surrounding white cabinets as closely as possible • Remove and reinstall the doors if required This is an investment property, so I’m looking for a neat, durable and cost-effective solution rather than a full kitchen renovation. Please provide your total quote including labour, materials and any applicable fees. If you recommend replacing the two doors instead, please provide a separate quote. Photos attached. Thank you!

We’re looking for an experienced floor sanding professional to sand and refinish approximately 10m² of existing timber flooring in our kitchen (the kitchen cabinets shown in the photos will be removed prior). We’re installing new kitchen cabinetry, so need to have the kitchen flooring completed first. We plan to have the remaining timber floors throughout the house sanded and refinished over the coming months. Scope of work: * Sand back the existing timber flooring in the kitchen. * Carry out minor repairs if required. * Fill nail holes and other small holes with suitable putty or wood filler. * Apply black gap filler to the gaps between the floorboards. * Apply a clear protective finish to the sanded timber. * Leave the floor smooth, clean and ready for the new kitchen cabinetry. Important considerations: We understand that the newly refinished kitchen floor will look different in colour to the existing floors throughout the rest of the house until we have the remaining areas completed. We’re happy with this and do not want the new flooring to match the existing, unfinished floors at this stage. We’re looking for someone experienced with older timber floorboards who can recommend a suitable clear finish and achieve a good-quality result. Please provide a quote for the above work, including labour, materials and any minor repairs that may be required. Please note that this MUST be completed between the 30th October and 3rd November. Thank you!

Looking for an experienced deck restoration professional to help us finish restoring our large outdoor timber deck. We have already spent considerable time preparing and sanding the deck using a drum floor sander and handheld belt sander. Unfortunately, the old reddish-brown paint is proving difficult to remove and has left the deck looking very patchy. What we need: * Assess the current condition of the deck and remaining paint. * Remove the stubborn old paint/coating using the appropriate method. * Complete sanding and preparation to achieve a consistent finish. * Restore the built-in timber bench seating, including backs and fronts. * Prepare and apply a suitable exterior timber oil or finish. * Clean up and remove all paint debris and waste. Our desired finish: A lighter, natural timber look with a slight sheen rather than the existing dark reddish colour. We are not looking to replace the deck, just have the existing timber professionally restored. Ideally looking for someone experienced with stubborn painted decking who has their own professional equipment. Photos attached showing the current condition. Thanks!

I have an internal painted door that previously had a hole in it. The hole was repaired using wood filler/wood dust, but the repair was not finished properly and the patched area is still visible. I’m looking for an experienced handyman/painter to professionally redo/finish the repair so that the surface is smooth, level and blends with the rest of the door as closely as possible, with no obvious patch marks. The existing repair may need to be sanded back, levelled/re-filled as required, primed and painted. I’m happy for the whole face of the door to be repainted if that will give a cleaner and more consistent finish, rather than just touching up the repaired area. Please include all materials, filler, primer and paint required in your offer. Photos attached showing the current condition. The main priority is the quality of the finish. I want the repaired area to be difficult to identify once completed. Please let me know whether you recommend repairing/refinishing the existing patch or another approach to achieve the best result.

I’m looking for someone experienced in repairing and finishing concrete ceilings to make good an exposed area in my toilet ceiling, approximately 550 mm × 270 mm. Please see photos. (The copper pipes were burst during an electrical installation, but are fully repaired now). The concrete slab has been exposed around two copper pipes and a round electrical fitting. I’d like the area repaired and finished flush with the surrounding ceiling, ready for painting. Please let me know whether your quote includes painting, materials and cleanup. I also want to have a ceiling light installed at this location. Please allow for that when assessing the repair, and advise how the electrical fitting should remain accessible. Located in Ivanhoe. Please let me know your proposed repair method and whether you’d need the electrician to attend before you begin.

- existing pine floorboards, with dated top coat. I want sanded and refinished with a water based matte clear coat afterwards. Home is approx 72m2 internally.

Looking for an experienced professional to sand and refinish approximately 100 m² of existing Tasmanian oak flooring in an empty, single-storey house in Glen Waverley. Areas included: Living and dining areas Small butler’s kitchen Laundry Hallway Three bedrooms Bathrooms are excluded. Work required: Professional sanding to remove the existing coating and renovation marks Proper dust-extraction equipment Minor filling and floor preparation where required Three-coat professional water-based finishing system Natural matt or satin appearance Clear finish with no staining required The preferred product is Synteko Pro, Synteko Top or an equivalent professional-grade, single-component water-based flooring finish. Please specify the exact product proposed. Oil-based finishes will not be accepted. Significant board replacement or repairs must be identified and quoted separately before commencing. The house will be empty and the floors cleared. Current photographs are attached. Work must be carried out and completed on 24 /25 September 2026. Budget: $3,500, including labour and materials.

Four years ago I got the bright idea to grind the interior floors of my apartment myself. The results were.. mixed The slab was ground down to expose the aggrigate and several coats of a clear self-levelling epoxy were applied. As you can see in the images, there are grinding marks in some places, with the kitchen where I first started, being the worst location. The floor is also uneven to a degree, the self levelling epoxy did not eliminate this and many of the edges of the rooms are slightly higher than the centre. How much of an issue this is, im not sure. I am looking for a professional who would be able to provide a solution, preferably several options to choose from, to improve the appearance of the floor. This would include quoting for an entire apartment refinish/refurbishment of floors to section based refinishing for the kitchen and/or hallway areas. I have included some images as well as the floor plan of the apartment with the flooring present in all rooms minus the bathroom and toilet. Please also note the apartment is on the second floor of a 1970s brick walk-up. Thank you, Adam

Would like this bookshelf sanded back and refinished, potentially in a darker wood stain. Then need it secured to the wall. Dimensions approx 230cm x 91cm

37 m/2 Baltic pine. Sand and refinish, would prefer a water based polyurethane finish. Ground floor California bungalow

Need help refinishing the wooden doors and skirting boards in my hallway as they have been chipped and scuffed over the years. I would like them to be refinished and protected for years to come

Surface refinish preparation. Does not include re coating. Exterior walls are mud brick and not lined/cladded

Hi, looking to get a bathtub respray / repaired and also a bathroom bench top Thanks Travis TMC Real Estate

I’m looking for someone experienced in sink resurfacing, reglazing or re-enamelling to restore an older bathroom/laundry sink. The sink has significant yellow/brown staining around the drain that professional bond cleaners were unable to remove. I’m unsure whether the sink is ceramic, enamel or acrylic, so I’d like someone experienced to assess the surface and recommend the appropriate repair. Ideally, I’d like the sink restored to a clean, uniform white finish.

Looking for someone experienced in refinishing aluminium window and sliding door frames. Approximate scope: - Around 8 aluminium windows - 2 aluminium sliding doors - Existing frames are brown - Want them changed to black - Inside and outside - Proper surface prep, masking, priming if required, and a durable sprayed/painted finish - Happy for the Tasker to recommend the best-value finish that looks good and lasts well Would prefer someone with experience specifically painting or refinishing aluminium window frames. Timing: ASAP / flexible on exact day for the right person.

4x4 room (16sqm) 1.8x2.2 laundry (4msq) 2.3x2.3 walk way (6sqm) 3.7x3 kitchen (11sqm)

The deck is in good condition. It has begun to show traffic patterns and the finish is showing wear and tear. Prep and finish application is the job to be done. No woodwork or repair is otherwise required

Need someone to sand and refinish the floor.

I need my floor boards sanded down and refinished with similar stain. Part of my floor has some water damage - see photo.