Find an experienced cabinet maker in Melbourne

Hi, in need of a handyman, cabinet maker To make and build and assemble seating benches with storage for a cafe

Cabinet maker to replace 2 kitchen panels. See pictures

Hourly rate assisting with kitchen installation

Increase size of existing built in cupboard by cutting out wall above current doors and giving space for taller doors. Request is to cut out, make good with architrave and reinstall the door rails. Painting not required. Width 1.6m, existing height 2.1m, want to increase height of frame by 40cm.

Hourly rate assisting with kitchen installation

I need some wide drawers made. Soft close. We usually use formply, so experience working with that material is a plus. Send your folio and price range. Ideally constructed off site and delivered. Image is AI, just for reference of what I'm looking for, dimensions can be provided.

I have need for a cabinet maker or handyman to add two extra concealed hinges to a kitchen cabinet door in Moonee Ponds? Do you have the 35mm drill bit and positioning jig to drill two more cavities for the 2 added hinge cups? I have purchased 4 identical hinges already. If you wish to take this job please quote a fee and suggest a day/time. Thanks

Hourly rate assisting with kitchen installation

We have the base of laundry and storage built - but it’s not covered. We need space efficient bifold doors to cover shelving and laundry. 3m ish long! Not a task that can be accepted without a site meeting. Will need creative thinking as cannot eat too much into corridor.

I need cabinet maker , shop fitter for a shop located cbd

Making two drawers wider and fitting into a kitchen

Could I have someone make some build in cupboards for me? I live in St Kilda and a studio.

We have had an old spiral staircase replaced with timber and we are now wanting some custom draws in this space. Also looking at updating our built in wardrobes in 4 bedrooms.

I recently purchased a Koala side table (you can see the product link here: https://koalaliving.com.au/Riviera-Sofa-Accessory-Side-Table). Unfortunately, I botched the measurements, and there's a bit of a gap above the sofa arm as you can see in the photos! While Koala has told me that it would accept a return of the product, my preference would be to keep the table as I otherwise like the look of that. However, for it to be feasible as a side table, I would need the height reduced by 60mm. I am not precious about how this occurs (eg if there would be a disturbance in the grain. Could you please let me know, based on the product specifications and my intended requirements, whether this would be feasible, and if so, your quote for performing the modification?

After a custom cupboard with melamine and moisture resistant substrate. Would need to make in 2 modules unless assemble on site in North Melbourne. See pictures for drawing details/dimensions. Thanks

Im looking for a cabinet maker who can order polytec vanity/bench top and some custom sized cabinet fronts (5) and drawers (2). All will be the same timber look finish. These will need to be installed on an existing bathroom vanity. The existing vanity need to be stripped of its top and doors and potentially have some laminate removed from the base cabinet ( though I could be open to just painting this area of it can’t have a laminate applied). I also want 2 drawers constructed and installed in the top area where the old vanity top overhung. The cabinet underneath seems set up to handle this. The vanity top will have a semi recessed basin. Paying for labour. You can invoice me the cost of the polytec materials.

To make up and install pull out pantry drawers on 9 existing shelves. Have measurements in the below pictures but need precise measurements and free quote.

Looking for quotes at this stage, which is why the budget is at $5. A friend has moved into an early 90s build brick apartment in Ascot Vale. To make room for the large fridge and a new dishwasher, part of the kitchen has been demolished. She is looking to fill the height with a combination of straightforward open shelving and cabinet shells to match the rest of the 90s style kitchen (plain chipboard). Also add doors to the space currently housing the microwave. We are looking for someone who is communicable and eager to work.

I really need this black bench/shelf thing removed. It’s built into all the apartments in my building. I can’t see how it joins but it’s really solid and stuck in there. I’d like it removed in a way that doesn’t damage the existing melamine (or whatever it is), although I understand it may expose some joins. Right now I just want the space it’s taking up.

I need a cabinetmaker to come and measure and quote for a small bespoke dental surgery. One surgery , sterilising room and tea room cabinets. Including measure quote instal etc