Find an experienced cabinet maker in Melbourne

I have a current 400mm pull out pantry. I want this removed, and a new pantry installed that utilises the rest of the wall. In the picture, the Red Cross is what I want removed. The green cross is where I want thee new pantry to go. Then I have an AI generated picture of the new pantry installed in walnut veneer. The height of the wall is 2330, and width of the wall (not including the current pantry) is 1240. I would want 3 400mm tall shallow pantries installed, and the existing one to be a dead space.

Construct and install wardrobe, with four drawers and one shelf (as per second image). Custom wardrobe, built in the space beside fireplace and wall. The measurements are: 94 W x 270 H x 56 D Made from MDMF (or similar) no painting required, I’ll paint after installation. Standard ‘pin’ hinges Standard drawer slides I’m wanting the wardrobe to look similar look to the other wardrobe currently in the room (white one pictured). I don’t need side panels for the new wardrobe, using the ‘house walls’ (chimney and facing wall) is fine (see photo) Ideally, tradesperson to provide the materials.

We need a cabinet maker to adjust some pocket doors, a bin pull out drawer and a couple of ordinary doors. The brand of hardware is Hettich. They’re only 3 years old.

Kitchen,laundry and two vanity units.

We’re looking for a cabinet maker, shopfitter, or experienced handyman to help straighten eight upright wall units and secure them firmly to the wall. The units are already in place — they just need to be aligned properly, levelled, and fixed securely so they sit straight and stable. Ideal for someone with experience in cabinetry, shelving installation, or retail fit‑outs. Looking for someone reliable, careful, and reasonably priced.

Looking for a cabinet maker to redesign my cabinets and do some cutting. The job require a professional cabinets maker, to modify my bedroom wardobe so it can fit a larger bed. It require cutting of the cabinate, reassembly and then putting the finishing strip on the open cut. You can see the picture that is marked with red lines, the X is where I want to remove, and the red lines is what the finish should be like. Work is done at cbd apartment.

Supply and install of Timber bedhead, timber shelf above bed and 2 floating bedside tables. All from the same timber. Wall has already been painted. Photo attached for reference Mindful you may need to measure and quote upon insptection

A desk to go along 1 wall and 3 floating shelves in oak veneer. I’d love rounded edges but it might not be possible. The install date but be too soon. Not a massive job.

Storage cabinets in toy room, one bedroom cupboard and a built in desk

Need a cabinet maker or able carpenter to install hinged deco ply to existing cabinets. Seeking advice on hinge type needed. Measurements & cuts that need to be made. Must have all necessary tools to complete job

I need a cabinet maker to come and look at a kitchen and let us know how to increase fridge space.

Seeking a cabinet maker for built-in cabinets in two rooms (lounge & dining room), kitchen & bedroom, & to install a really heavy mirror and a solid wooden cup holder. Also want to scope out cost of redesigning a loft bed with a lot of storage. Interested in someone who loves design hacks and thinking creatively!

I am looking for an experienced kitchen cabinet maker / cabinet installer to inspect and modify my existing kitchen cabinetry to fit a new fridge. Current setup: Existing fridge cabinet height: approx. 165 cm (with cabinet door) Overhead storage cabinet above fridge: approx. 47 cm There is a fixed partition between the fridge cabinet and the overhead cabinet. Problem: Most new fridges available are 170 cm or taller, which do not fit in the current cabinet opening. Work to be done: - Inspect the existing cabinetry on-site. - Remove or adjust the partition between the fridge cabinet and overhead cabinet - Increase the fridge cabinet height by moving the partition upward - Modify Fridge cabinet door height if required - Modify Overhead cabinet height (if required) Ensure the final finish matches the existing kitchen as closely as possible. Please note, this Quote is only for sire visit, analyse the situation, propose solution and budget for the same. If both parties agreed we should take the fixing problem in offline.

I’m looking for an experienced carpenter with strong cabinetry and custom fit-out skills to convert my 2016 Ford Transit High Roof van into a camper, based on the attached reference design. This is a complete interior build — ideal for someone who has worked on campervans, caravans, tiny homes, or high-end custom cabinetry projects. Project Scope • Conversion of Ford Transit High Roof (2016) • Custom cabinetry, storage units & bed platform • Interior framing, wall panels & finish work • Precision cutting, fitting & installation in compact space • Working from design / photo references • Layout to accommodate electrical & plumbing areas (no wiring required) What I’m Looking For • Proven carpentry / cabinet making experience • Experience with van / camper / mobile interior builds (preferred) • Strong attention to detail & craftsmanship • Ability to work independently and problem-solve • Own tools & reliable transport Job Details • Paid hourly (rate negotiable depending on experience) • Materials covered separately • Full project build — not a minor job • Must be able to start soon • Completion required within the next few weeks

Need drawer in existing kitchen

Im doing an install tomorrow morning in Richmond, looking for a labourer for the day to assist lifting a couple cabinets in situe. Must have some tools and ladder. Kickers already down and carcass mostly installed. Duties will be. Installing hinges (screw in already drilled drilled) Cleaning capping Assistance lifting above bench units (will be heavy) - other duties too pending experience level. Cheers

I’m looking for a cabinet maker who would be able to make some small shelves 40cm x 20cm to fit this recess in our wall. The recess is 173cm tall. Nothing fancy just some timber shelving that could hold books etc

Need my laundry redone a cabinet maker to make bench and cupboards looking for measure and quote

Interested in having a storage bench built in my living room. Ideally in polytec Boston oak.

I am looking for a qualified cabinet maker, or highly experienced tradie to reposition my kitchen island bench. It currently sits on a diagonal angle and I want it dismantled and moved so that it is parallel to the back cabinets with the oven where the tape has been marked on the floor. It will require the stone to be moved and we have 2-3 people to help with that because it will be heavy. Please see photos of the layout. It has electrical and plumbing which will need to be disconnected and reconnected. I will also sort for the plumbing and electrical to be turned off and back on.