Find a professional local car service in Belconnen

Looking for an experienced automotive painter/detailer to repair, restore or replace the clear coat on a Mazda CX-5. The clear coat has deteriorated in several areas and I’m looking for advice on the best repair method and a professional finish. Depending on the condition, this may involve sanding/preparation, clear coat restoration, re-clearing affected panels, or repainting where necessary. Requirements: Experience with automotive paint and clear coat repairs Assess the current paint/clear coat condition Recommend whether restoration or repainting is the best option Prepare affected areas correctly Apply suitable automotive clear coat and achieve an even, durable finish Colour and finish should blend well with the existing paintwork Please provide details of your experience, proposed repair method, estimated cost, and examples/photos of similar work if available. Happy for the vehicle to be inspected before confirming the final scope and price.

I am looking for a quote and capability before I buy the second car Task: Mazda CX-5 Diesel Engine Replacement / Engine Swap 2012 to 2013 Looking for an experienced mechanic to complete a full engine replacement between two Mazda CX-5 diesel vehicles. Vehicles: Donor vehicle: 2012 Mazda CX-5 Diesel Recipient vehicle: 2013 Mazda CX-5 Diesel Both vehicles will be available for the job. The intention is to remove the complete working engine from the 2012 CX5 and install it into the 2013 CX-5. Preferred approach: I am looking for the simplest and most reliable full-engine replacement rather than rebuilding either engine. Ideally, the job would involve: Confirm engine/engine code compatibility between the 2012 and 2013 CX-5 before commencing. Transfer the long motor/complete engine into the 2013 vehicle.Where required, retain or swap over the 2013 vehicle's existing ancillary components, wiring loom, sensors, ECU-related components, intake/exhaust equipment, DPF/EGR components and other modelspecific parts. Use the recipient vehicle's electronics/ECU/immobiliser setup wherever practical to minimise coding and compatibility issues. Inspect engine mounts, hoses, belts, seals, coolant lines and other accessible service items while the engine is out and advise if anything should be replaced. Important: I would prefer the mechanic to use whichever combination of parts from the two vehicles provides the easiest and most reliable installation. The aim is not to unnecessarily swap ECUs, immobilisers or complete wiring systems if the 2012 engine can be installed using the 2013 vehicle's existing electronics and accessories. Please quote for labour for the complete engine removal and replacement, and let me know: Your experience with Mazda CX-5 / Skyactiv-D diesel engines. . Approximate additional parts/consumables Both complete vehicles would be available, Looking for someone experienced with engine swaps rather than general servicing.

I'm looking for an experienced motorcycle mechanic to help complete the restoration of my 1991 Honda CBR250RR MC22 in Canberra. I already have most of the parts. I'm looking for someone to fit them and carry out the remaining mechanical work. Work includes: Fit rear shock Install new chain and sprockets Fit spark plugs Install clutch and/or brake perch and controls Fit handlebars/clip-ons if required Install front mudguard (including correct fender mounting bolts/spacers) Check and correctly torque all fasteners Bleed front and rear brakes Replace engine oil and filter Replace coolant General inspection of bearings, seals and suspension Check the bike over before it is roadworthy Parts I already have include: Vandemon exhaust New tyres New chain and sprockets Spark plugs Brake levers/perches Various mounting hardware and restoration parts Looking for someone with experience working on older Japanese sports bikes (Honda MC22, CBR250RR, FZR250, ZXR250, etc.). Please let me know your experience, where the work would be completed, and an estimate of labour costs. I'm after quality workmanship rather than the cheapest quote. The bike is being restored to a high standard.

Have a couple of roof racks to attack to my Jeep rails. Don’t have the right tools. Very simple job - would take 15 mins for someone who knows what they’re doing.

I had a small dent and paint scrapt while exiting a parking lot. On the left end, near rear door panels. I want it to be fixed professionally with no color patch visible.

Sony active sub woofer sx-aw8 into Toyota Aurion ..

Power steering pump replacement RH Drive shaft CV boot split Front lower control arm bushes split Front shocks and springs sagged I’m a single mum currently studying, I don’t have much money to around and have already been quoted $3600+ can’t afford to pay all that

Install infasecure ranger ii convertible car seat into my 2006 CRV.

Bcm installation for my 2011 Holden cruze, which is a manual transmission 1.8l petrol car. I have purchased the Bcm unit which matches my car's part number. Previous mechanic rewired to get the external electrical functioning as we couldn't source a suitable bcm.

Need to replace existing usb hub with new one to give car CarPlay functionality.wrap new cable with anti rattle tape

Need a custom false floor built for my Nissan X-Trail Ti (2017). Purpose: I want to level the boot area so I can sleep/camp in the car. The platform must be strong enough to support two adults. Dimensions: - Width: 85 cm - Length: 80 cm - Height: 17 cm Looking for a sturdy, well-finished build (plywood or similar), with a flush fit in the boot. Strength and stability are very important. Open to suggestions on design and materials (e.g. reinforcement, support legs, etc.). Please include your quote, timeframe, and any similar work you’ve done. Located in Dunlop, Canberra.

Labour cost to remove the existing USB hub, install the new one, refit all trim, and test that both Apple CarPlay and Android Auto are working correctly. If required, the cost and process for updating the head‑unit firmware to a compatible version (e.g., 70.00.021A or newer).

Hi, I need a leather car seat seam repaired on my 2013 Toyota LandCruiser Prado located in Canberra ACT. The damage: • Driver seat centre bolster seam has split open along the stitching • Stitching has come apart and foam is slightly visible • Remainder of the seat and leather is in good condition • Photos attached for your reference What I need: • Seam stitched/repaired and made presentable • Leather cleaned and conditioned around the repair area if possible • Must look reasonable for a car sale inspection Location: Canberra ACT [your suburb] Vehicle: 2013 Toyota Prado — silver, available for inspection at my home Availability: Flexible — any day this week or weekend preferred Budget: Open to quotes — please include your experience with leather seat seam repairs and any before/after photos of similar work. Ideally looking to get this done within the next few days as the car is being listed for sale shortly. Thanks!

Need to fit 2 x car seat cover in a 2011 Lexus rx350

Put wheel trim back in wheel arch for Nissan navara

Aircon stopped working on our 2008 Toyota Kluegar

It appears the starter motor needs replacing.

Needing the old shifter assembly removed and replacement installed. Have the parts ready to go just need someone who knows what they're doing. Car is a 2003 Ford Fairmont Automatic

Install a towbar onto ford mondeo. Pictures of parts are listed in the images

I need to replace all tyre Wheel alignment