Find skilled builders in Brisbane Southside

The photo illustrates the type of driveway crossover required. Our driveway is 4M wide, and the gap is 700mm across from the existing driveway edge to the road edge

Tree removal + complete stump/root removal for new driveway Looking for a qualified and insured tree removal contractor/arborist to remove the tree pictured. The area will become a new concrete driveway, so I need: Entire tree cut down and removed All green waste removed Stump/root ball fully excavated and removed — not just stump grinding Major roots within the future driveway footprint removed Excavated material removed from site Area left suitable for driveway contractor to backfill and compact Tree is at the front of the property with good street access. Please quote the complete job and advise what machinery you intend to use (mini excavator, stump grinder, etc.).

Need to make concrete driveway. Around 50m2. Also need concreting at back yard.

Apologies, airtasker removed previous post with no explanation. Looking for an experienced gate fabricator/welder to repair our existing pedestrian and driveway gate setup. Work required: Supply and replace existing heavy-duty steel gate post, powder coated black to match. Remove the pedestrian gate. Repair/re-weld the cracked welds around the section where the McGrath digital lock/handle is mounted (photos attached). Powder coat/refinish the repaired pedestrian gate so the repair is properly protected and matches the existing black finish. Reinstall the pedestrian gate and ensure it is correctly aligned and operates smoothly. Reinstall/cut in the striker for the McGrath digital lock into the replacement post and ensure the lock operates correctly. Install an existing magnetic lock used by the adjoining gate onto the replacement post and ensure alignment/operation. Make good any areas affected by the work. Looking for a proper, neat and durable repair, not simply welding over the existing cracks while the gate is in place. Please quote for the complete job including supply of the replacement post, fabrication, welding, powder coating and installation. Photos attached showing the existing setup and damage.

External Gazebo 3x 4.3 installation on low level deck. Product supplied

Install Easy shed 3m x 2.25(see photo below) All materials will be at work area. Shed may overhang retaining wall on one side by 50-100mm . Slab is being poured Saturday 5 September Job can start at 9am Friday 11 September. Only easy shed certified badge may apply

We need a small reinforced concrete slab constructed beside our driveway, against the house/boundary fence. The finished slab needs to be approximately 1100mm × 450mm × 100mm thick and completely level/flat, as it will be used as a base for gas bottles. Work required: * Saw-cut and remove a small section of the existing concrete driveway to create sufficient space for the slab. * Existing driveway is approximately 100mm thick. * Approximate saw cuts required: * 1100mm long * 120mm long * Remove and dispose of all cut concrete/rubble. * Excavate/prepare the area as required and provide a suitable compacted base. * Form up the slab. The house/boundary side can form two edges of the area, with formwork required to the remaining exposed edges as appropriate. * Install steel mesh reinforcement, adequately supported within the slab. * Pour a 1100mm × 450mm × 100mm reinforced concrete slab. * Slab must be perfectly level, despite the adjoining driveway being on a fairly steep gradient. * The new slab must not follow the slope of the driveway or simply be poured onto/joined to the sloping driveway. * Neat finished edges and surface. * Remove all waste and leave the area tidy. Access is straightforward from the driveway. I’ve attached photos showing the location and the section of driveway that needs to be cut. Please quote including labour, concrete, reinforcing mesh, formwork/base materials, concrete saw cutting and removal/disposal of the old concrete. Please also let me know if you have experience with small reinforced concrete slabs and whether you have your own concrete saw/equipment.

The Easy Shed is going on the dirt in back garden. It’s a small shed (D1.5 x L1.9 x H2.1) Theres plenty of space to build it. I am home from late-morning everyday til sunset.

Bathroom- remove wall tiles floor tiles toilet vanity leave it clean skip bin supplied

Install approx. 35sqm of Stainless Steel Mesh onto an existing metal pergola. Stainless Steel Mesh and fixings will all be provided

Help assemble a absco shed please To be put in backyard I can't afford anymore then what I have stated

I need someone who has the tools, to drill and feed a electrical conduit underneath my Driveway for a future automatic gate Install. Im just looking at prices atm. I would say the span I would need dug under neath my drive way would be around 5 metres.

Needing either side of my driveway dug down 100m to extend driveway. Needs to be done before Tuesday Roughly 7m long by .7m wide either side Need dirt to be removed from site also

2 bedroom house demolition and remove. Has one garage old house

Backyard renovation in progress. I need someone to come and pick up all the rubbish coming out of the backyard and move it into a skip bin on site. Wheel barrow provided. No other tools required. Hourly rate - guaranteed min 2 hours pay.

Concrete driveway required

Need carport skillion roof @ 9.5 meter x 6.5 meter

https://easyshed.com.au/collections/garden-sheds?sort_by=best-selling&filter.p.m.filter.width=3.75m&filter.p.m.filter.depth=1.5m&filter.v.option.colour=Armour+Grey&filter.v.option.colour=Mist+Green&filter.v.price.gte=&filter.v.price.lte=

The soil is a mix of good and clay with a few bricks, a few small roots. Good for landfill. You will need a excavator to remove it.

Install a metal garden shed in the backyard. Please see the photo. Already installed one in one side and need to install another one on the other side. Shed size 3m L, 1.5m D. Quote on site please.