Find a professional pergola installation expert in VIC

Pergola with slope to gutter and side fence screening

We want to move and replace the side gate and fence with something like a rapid fence 1130 x 1800 classic white PVC gate and side panel available at Bunnings. Replace a section of the retaining wall in a couple of sections. Section 1 would be in a bin enclosure space, being 800mm deep on either side and 1900mm wide at the back and 600mm high. Section 2 is a retaining wall off the bin enclosure space approximately 5000m long and 400mm high. Section 3 is at the edge of the alfresco that would have steps on one side approximately 1200mm wide and 3-4 steps, and then a floating bench seat with a planter box on either side. We would like remove a small section of the pergola roof to straighten the alfresco roof line up and then over section 2 of the retaining wall add an open roof pergola from the fence or retaining back to the house - refer to pictures with the white open roof pergola as an AI generated image as an example. All rubbish removed from site after completion

Paint the timber beams under our pergola. Paint supplied. You would need to prep the area also.

I am looking Fwd to build 2 merbau deck 1. 6M X 3.8M 2. 2.8M X 2.8 M

Garden vine needs removing from top of pergola. Has been cut at the base. So it has now died.

I need a wooden pergola to be built

Hi, I’m looking for an experienced handyman/tradie to cover my side area with a roof/pergola and install a door between two existing windows (see photos). Approximate dimensions: • Length: 8 metres • Width: 1.8 metres • Height: 2.6 metres I’m mainly asking for quotes at this stage. Budget is flexible. Happy to arrange an inspection first for accurate pricing. Please message with your quote, experience, and availability. Thanks.

Looking for an experienced and reliable tradesperson to install a 3m x 3m pergola (already purchased)on an existing paved area. Please see photos attached.

I have a ceiling in my new pergola all prepped, just need a hand painting the ceiling. I have the paint and rollers. It is all masked up ready to go Pergola is 7x7 metres Scissor lift is onsite

Pergola installation Aluminium kit. With 4 zip blinds.. 5m X 3.8m In a pool area. All parts are adjacent to the installation area. But need to be brought into the pool fenced area. Might required the porcelain pavers to be cut out at the feet of the pergola, or bolted through the porcelain with appropriate drill/core drill. Gm-outdoor dot com will show you the product. It's a gumei 220 series.

Need shade cloth and tarp (already purchased) installed to already built pergola.

I need all three panels on this pergola done in white, patch work has been completed. Material is aluminium

The outer beam of the pergola has bent/warped outward, causing the structure to appear uneven. You will need to prepare the treated pine as tools to repair or replace the beam.

Laser light on top of pergola is damaged and needs to be removed . Pergola is approx 5metres x 4 metres .

Replace or fix two LED Lights in pergola area

Pitched pergola requires 8 frosted plastic sheets of laser light replaced and othe. One side has been cleaned. Handyman will need to provide material - roofing screws and matching new sheets. You will need your own ladder and safety equipment and required to dispose of the old sheets.

Need to remove old polycarbonate roofing sheets and install new ones

We have a DIY kit of the Pergolux S2 pergola - freestanding 4 x 4 including LED lights. Requires two people. We'd like to see some quotes on assembling this. Assembly instructions can be found here: https://pergolux.au/products/pergolux-sundream-2 There's an installation video here https://www.youtube.com/watch?v=-U-8eDPl_rs Full tools and requirements can be found in the installation guide, but you will need a screw drivers, mallet, level, pliers, caulking gun (with appropriate weatherproof sealant), Allen keys, drill, tape measure, ladder. will need to be secured with appropriate anchors into limestone pavers which have been laid on a concrete slab. The cost of extra anchors etc, we can pay for. Location is shown in the images. Thanks

I have 2 diy louvered roof pergolas side by side, frames have been assembled but i need help to install louvered roof panels on both. Dimension for pergola is 4m by 3m (2 sets)

Remove and Replace Laserlite Clear 2000 to small rear pergola.We shall supply Laser light,Screws and Noise stop tape. Use the existing polycarbonate as template. You will need appropriate ladders etc.