Find a professional pergola installation expert in VIC

I need someone to install corrugated sheet for my pergola 9x3 m I can supply sheets Scope of work - remove existing sheet, dispose off - install new sheet - if gutter required install that too

Seeking the assistance of a surveyor or relevant professionals for drawings for pergola.

Need carpenter to replace rot fascia of house on ground floor. Approximate length 13 linear meters. Will supply timber of treated pine. Attached are the photographs.

Need to replace the roof of pergola to retractable or glass roof .

3 coats of weathershield on pergola (border, rafterd and battens). 3 posts to be done in Cutek (post only). Paint abd stain will be provided onsite.

I’m looking for a qualified tradesperson to inspect and fix the ceiling/roof of my pergola. During strong winds, it produces loud rattling and creaking noises, as if something is loose. I’d like it inspected and properly secured to eliminate the noise. Prefer a windy day to make sure it has been fixed.

As noted prior needs to be suitable for uprights and pergola whilst also smooth enough for stone paving (so wont need significant attention to detail per say as will not be exposed) 6 x 4M slab is dimensions

We need an old pergola roof removed (but pergola structure & guttering to remain in place), including taking out all the bolts and screws holding it in place. The area to be removed is approx 18m2 - 5.3m x 3.4m. Is at an angle (hard to picture) and will require ladders (please bring) to do safely. The roofing over laps with the neighbours so on that side must be done carefully. There is no wiring or plumbing through the space. Note there is a hanging clothesline that needs to be kept. There is access through the garage to parking so a vehicle can be parked off street to load into and out of. Pictures attached.

Need someone to put a roof on the pergola, only have a tarp covering it at the moment

I have a ceiling in my new pergola all prepped, just need a hand painting the ceiling. I have the paint and rollers. It is all masked up ready to go Pergola is 7x7 metres Scissor lift is onsite

Need shade cloth and tarp (already purchased) installed to already built pergola.

I need all three panels on this pergola done in white, patch work has been completed. Material is aluminium

The outer beam of the pergola has bent/warped outward, causing the structure to appear uneven. You will need to prepare the treated pine as tools to repair or replace the beam.

Laser light on top of pergola is damaged and needs to be removed . Pergola is approx 5metres x 4 metres .

Replace or fix two LED Lights in pergola area

Pitched pergola requires 8 frosted plastic sheets of laser light replaced and othe. One side has been cleaned. Handyman will need to provide material - roofing screws and matching new sheets. You will need your own ladder and safety equipment and required to dispose of the old sheets.

Need to remove old polycarbonate roofing sheets and install new ones

We have a DIY kit of the Pergolux S2 pergola - freestanding 4 x 4 including LED lights. Requires two people. We'd like to see some quotes on assembling this. Assembly instructions can be found here: https://pergolux.au/products/pergolux-sundream-2 There's an installation video here https://www.youtube.com/watch?v=-U-8eDPl_rs Full tools and requirements can be found in the installation guide, but you will need a screw drivers, mallet, level, pliers, caulking gun (with appropriate weatherproof sealant), Allen keys, drill, tape measure, ladder. will need to be secured with appropriate anchors into limestone pavers which have been laid on a concrete slab. The cost of extra anchors etc, we can pay for. Location is shown in the images. Thanks

I have 2 diy louvered roof pergolas side by side, frames have been assembled but i need help to install louvered roof panels on both. Dimension for pergola is 4m by 3m (2 sets)

Remove and Replace Laserlite Clear 2000 to small rear pergola.We shall supply Laser light,Screws and Noise stop tape. Use the existing polycarbonate as template. You will need appropriate ladders etc.