Find a kitchen installation professional in VIC

Looking for a skilled kitchen installer for a straightforward cabinet install job. Cabinetry and benchtop are being supplied by a cabinet maker — this job is installation only. Rough kitchen design attached for reference (laid out using IKEA's planner tool, but the kitchen itself is not IKEA). Scope of works: - Build a pine plinth for the base cabinets to sit on - Install 7 assembled base cabinet carcasses, including attaching doors - Replace 7 upper cabinet doors (new doors supplied, existing upper cabinets are staying — doors only) - Fix approx. 17 new knobs to cabinet doors and drawers - Install new timber benchtop, including cutout for a top-mount sink - Fit side panels and kicker board to finish the kitchen What's needed: Experience installing kitchen cabinetry and benchtops (non-negotiable — please don't apply without this) Own tools required Must be comfortable with precise cutout work (sink cutout in timber benchtop) Materials: All cabinetry, doors, benchtop, knobs and hardware supplied. Installer needs to bring plinth timber (pine) unless otherwise arranged, and general fixings/tools.

Cabinet expert - Required ikea kitchen internals - draws, cupboards and side panels - oven, cooktop and sink (i have electrical and plumber contracts to support) Needs to be completed before Friday 31st.

I am renovating the unit. I have removed the old kitchen and have bought the replacement kitchen which has to be installed asap. I am available to meet someone at the unit tomorrow 28 July 2026 or i will give access.

L shaped abode kitchen 3.2m x2.4 with overhead cabinets on 2.4 side with 2.4 high panels for wall oven

** EDITED with more detailed requirements Looking for an experienced cabinetmaker or joiner to install a fully integrated Ikea kitchen with custom size benchtops. More 3D design files will be available when required. Cabinets: already assembled, they simply need installation. There are no overhead cabinets. Benchtops: need modifying so shall require accurate measurements and cutting as well as cutting the openings for sink and cooktop. See photos for more explanation on the most difficult cuts.... Additiolnally, excess materials to be cut for shelving (also to be installed). All finishes like silicon and edge trimming for cut bench tops to be included in quote. Benchtop joins to be mason mitre joins Island Bench: To be secured to tiled flooring Appliances: RangeHood and dishwasher to be installed (plumber booked) Requirements: Must have proven experience with IKEA installations and bring all necessary tools for onsite benchtop cutting and drilling into tile flooring. Timing: Dates around the 23rd July Please quote

Ikea kitchen installation with laminate benchtop top .

I need my kitchen demolition and the kaboodle range from Bunnings installed once received. There layout will be the same so no plumbing or electrical work required, and hopefully the splashback can remain the same.

IKEA kitchen install. We have all the items already

Hi there, I’m looking for an experienced kitchen installer (ideally with IKEA kitchen experience) to attend a site visit at my home in St Kilda and provide an accurate quote for installation. I already have a completed IKEA kitchen design and item list, and would like someone to review the plan in person, check measurements, and identify any considerations before finalising installation pricing. This task is for the site inspection only, including: - Reviewing the IKEA kitchen plan - Assessing the space and measurements - Identifying any potential installation challenges or requirements - Providing a detailed quote for the full installation (to be awarded separately) Please note: - I am meeting with a small number of installers to compare approach, experience and pricing before proceeding - The installation itself will be posted/assigned as a separate task I’m flexible with timing over the next few days/week, by mutual agreement. Thanks and I look forward to working with you.

Small L shaped IKEA installation. Approx dimensions - 2.4m x 3.7m. See picture for reference.

Looking for a licensed plumber and electrician (or a team capable of both trades) to carry out works associated with a new kitchen installation in Mordialloc. The kitchen layout will remain largely unchanged, with the sink, oven, cooktop and dishwasher staying substantially in their current locations. Electrical works: - Disconnect existing appliances during demolition. - Supply and install a dedicated circuit from the switchboard for a new induction cooktop. - Wire and connect the induction cooktop. - Reconnect existing electric oven. - Relocate or install any required power points. - Test and provide compliance certificates. Plumbing / Gas works: - Disconnect and permanently cap the existing gas line to the cooktop. - Install and connect the new sink and mixer tap. - Reconnect dishwasher. - Carry out any minor plumbing adjustments required to suit the new cabinetry. - Test and certify works where required. The work will need to be completed in stages and coordinated with the kitchen installers: - Initial disconnects during demolition. - Rough-in after old kitchen removal. - Final fit-off after cabinets and benchtops are installed. Kitchen installation dates are currently TBA, so some flexibility will be required. Please quote only if suitably licensed and insured. Experience working alongside kitchen installers is preferred. Location: Mordialloc, VIC.

We had someone install our Ikea kitchen. They did it free of charge so I'm im great full but just a few things need fixing up. Small defects. I'd like someone with experience to come in and tidy it all up. It's things like cabinet door alignment, Fixing door installation to ensure its flush. Possibly an end panel or two put in. Things like that. Also happy to discuss any improvements you think may be needed in person. No materials will be needed from you. Happy to do it on hourly rate

Need installation. Happy

We have to make butler pantry , shelves needs to come off and make a butler pantry

In-scope: - Removal of 1 base cabinet - Removal of existing tap and sink (to be replaced in new kitchen) - Removal of stove top (to be re-used in new kitchen) - Removal of all bench tops - Removal of existing cover panels & filler pieces - Installation/ cutting of new cover panels & filler pieces - Installation of 1 high cabinet - Installation of door knobs - Place dishwasher in correct position - Ensure all case cabinetry is level and ready for stone bench top installation Out of scope: - Installation of door and drawer fronts - Installation of bench tops - Plumbing associated with connection of dishwasher - Painting etc. Can provide additional photos on request.

Install ikea kitchen flatpack

Remove and install Ikea kitchen cabinets. This is a small galley kitchen approx 3m x 3m. Very basic kitchen.

I need someone to install the kickers, adjust the doors and few little things around the house, such as install trimmers to the floor. Range hood needs to be installed. Some skirting around the small toilet downstairs, This is a renovation project, final bits to do before hand over. All materials are on site. Please send hourly rate

IKEA kitchen installation Cabinets already assembled No plumbing or electrical required Just mounting and benchtop Budget $500-600

Looking for someone with Kitchen skills who can help me upgrade our current kitchen - photo attached. Something similar to - photo attached. Assist me in pulling the old one out, over viewing my choice in 2nd hand Kitchen assembly and installing the new kitchen. The gas stove and the dishwasher and sink will need to be moved to allow for a large double fridge. And the sink moved under the window. Hourly / daily rate preferred (abn only -no gst preferred) until the job is done.