Find an experienced driveway repair contractor in QLD

I need a professional tradie/business to seal my new driveway (just completed around 5 weeks ago). Quote should include all necessary prep work to get the sealing done. This task is to come and have a look at my driveway and quote for labour and materials, Approx 200 sqm. I’d like colour seal and the person quoting must have experience and tools to get the job done, should I decide to proceed with work, which I will post separately on this platform. Location is Westbrook.

We’ve got electric swinging driveway gates (Centsys brand). They’ve stopped working. Had a sparky out and he said it’s likely the gate motor as there’s no issues with power to it. Happy to fix or replace and not fussed on branding, as long as it works.

To put up a sunshade over driveway

Apologies, airtasker removed previous post with no explanation. Looking for an experienced gate fabricator/welder to repair our existing pedestrian and driveway gate setup. Work required: Supply and replace existing heavy-duty steel gate post, powder coated black to match. Remove the pedestrian gate. Repair/re-weld the cracked welds around the section where the McGrath digital lock/handle is mounted (photos attached). Powder coat/refinish the repaired pedestrian gate so the repair is properly protected and matches the existing black finish. Reinstall the pedestrian gate and ensure it is correctly aligned and operates smoothly. Reinstall/cut in the striker for the McGrath digital lock into the replacement post and ensure the lock operates correctly. Install an existing magnetic lock used by the adjoining gate onto the replacement post and ensure alignment/operation. Make good any areas affected by the work. Looking for a proper, neat and durable repair, not simply welding over the existing cracks while the gate is in place. Please quote for the complete job including supply of the replacement post, fabrication, welding, powder coating and installation. Photos attached showing the existing setup and damage.

Need to cut a trench across driveway, cut across drive 6m, cut across drive in the expansion joint, and one cut down side at 3 m. plus a few cross cuts in trench.

Looking for someone to concrete a small strip beside my existing driveway in Logan Reserve for car parking. Approx. dimensions: 4.45m long, 71cm wide at one end narrowing to 13cm at the other (approx. 1.87m²). Area currently has loose gravel/stones. Looking for a proper vehicle-suitable finish including preparation/excavation as required, compacted base, reinforcement and concrete, finished neatly to match the existing driveway level with suitable drainage. Please quote total cost including labour and materials. Photos and measurements will be attached.

Clean and seal driveway Approx 10m x 5 m in Sippy Downs I have recently gurneyed it so not too much cleaning involved I will provide the sealer Would like 2 x coats

I need someone to help fill this gap between our driveway. I’m not sure what would be the best option, but it needs to look presentable and neat.

Supply and attach new timber gate to existing timber posts. Gates open in the middle. Provide quote to paint gate in white as well.

Looking at cementing side of my driveway. Approx 25m2

I want to install these solar powered cats eyes. One went in easy (new cement) I tried to install it into the more established cement driveway and I only get like 20mm down before it just stops. I need better equipment. Can someone help me out?

We need a small reinforced concrete slab constructed beside our driveway, against the house/boundary fence. The finished slab needs to be approximately 1100mm × 450mm × 100mm thick and completely level/flat, as it will be used as a base for gas bottles. Work required: * Saw-cut and remove a small section of the existing concrete driveway to create sufficient space for the slab. * Existing driveway is approximately 100mm thick. * Approximate saw cuts required: * 1100mm long * 120mm long * Remove and dispose of all cut concrete/rubble. * Excavate/prepare the area as required and provide a suitable compacted base. * Form up the slab. The house/boundary side can form two edges of the area, with formwork required to the remaining exposed edges as appropriate. * Install steel mesh reinforcement, adequately supported within the slab. * Pour a 1100mm × 450mm × 100mm reinforced concrete slab. * Slab must be perfectly level, despite the adjoining driveway being on a fairly steep gradient. * The new slab must not follow the slope of the driveway or simply be poured onto/joined to the sloping driveway. * Neat finished edges and surface. * Remove all waste and leave the area tidy. Access is straightforward from the driveway. I’ve attached photos showing the location and the section of driveway that needs to be cut. Please quote including labour, concrete, reinforcing mesh, formwork/base materials, concrete saw cutting and removal/disposal of the old concrete. Please also let me know if you have experience with small reinforced concrete slabs and whether you have your own concrete saw/equipment.

Move 2m³ of Road Base & Sand from Driveway to Backyard Need someone strong to move approximately 2m³ of road base and sand from the driveway to an entertaining area in the backyard. 8 hours of work. Looking for someone physically fit and comfortable with heavy manual labour. Please state your HOURLY RATE when making an offer. TUES 11th AUGUST 7:30am - 3:30pm *There will be more similar upcoming work over the next few weeks*

We have a pile of clay and dirt leftover from filling in holes in the yard. We need help to remove it and you can either take it or place around yard

Looking to replace 3 colourbond panels and posts with a large double swing gate ~6m

The soil is a mix of good and clay with a few bricks, a few small roots. Good for landfill. You will need a excavator to remove it.

Just need some driveway lights installed please. 2x holes (on each light) which need to be screwed into driveway. Very easy job. Just don’t have the masonry drill bits. Total of 4 lights. Already have screws and lugs.

Looking for someone reliable this afternoon to help move approx. 3 cubic metres of rocks/gravel from the driveway to the backyard. Access is straightforward, but the material will need to be moved by wheelbarrow or similar. Happy for you to use your own equipment if you have it (wheelbarrow, shovel etc.), otherwise I can provide basic tools. Would suit someone reasonably fit as it’s manual work, but it’s a simple job and can be knocked over in a couple of hours. Offering $150 for the job. Located in Dinmore and ideally looking for someone who can come this afternoon.

Hi, I'm looking for someone to shift 2 cubic meters of crusher dust from my front driveway to back yard in Whitfield. Unfortunately, my side access is not wide enough for a wheelbarrow, but will fit a trolley to wheel bucket loads through. As per images There are other jobs needed after if that's something you'd also be interested in. Happy Easter 🐰

Looking for someone to remove and dispose of a single car concrete driveway. 2.45m x 12.7m Standard residential driveway Very good access for tools/machinery -Break up and remove all concrete -Take away and dispose of all debris We would like it done soon.