Find an experienced driveway repair contractor in Ipswich

Pressure clean driveway and reattach pavers to concrete driveway. The driveway is made up of pavers over a concrete base. An area of pavers approximately 2 metre’s by six metre’s have become loose need to be cleaned up and re-adhered to the concrete base. A proposed method follows. 1. Pressure wash the pavers top and bottom, and the underlying concrete base, to remove all dirt and debris and ensure surfaces will properly bond. Ensure pavers and driveway are dry before commencing next stages. 2. Stick the loose pavers back in place using Dunlop 2kg Wall And Floor Tile Adhesive or some similar product. 3. Once clean, apply the tile adhesive to the concrete using a notched trowel to create ridges in the adhesive. Then apply a smooth coating to the paver. When the paver is pressed into place, the ridges will squish, creating a vacuum between the adhesive on the ground and the adhesive on the paver. This will create the best adhesion possible. 4. Sweep in paver bond (a fine sand that can be swept between the pavers). The sand is coated with a special polymer that acts as a binding agent when activated with water. This will help to lock everything in place.

Concrete small area next to driveway

I need new driveway concreted. see picture in red. i assume it will need to be dug up and concrete poured. please send your offers and pricing area is aprox 5 by 5 meters. needs done in next few weeks. flexible

Looking for quote for driveway and perimeter

Need a colored concrete driveway

Need a sealer applied to driveway to protect it from cracking and UV. The driveway has been cleaned this weekend. So just need applying sealer. Can purchase sealer. Need to bring tools.

I need a concrete plinth supplied and installed for a sliding gate at my property. The plinth needs to be level and suitable to support the slide gate operation. Task includes supply of materials (concrete, reinforcement, etc.), formwork and installation. Clean up after completion required. Location: Ishmael Rd, Camira QLD 4300 Date: Before 31st August 2025 Budget: Open to quotes (please include materials + labour) Additional Info: Photos of site can be provided upon request. Please have experience with concreting and gate installations.

Looking to install a driveway gate, manual or electric depending on price. Concrete posts already in place either side and concrete driveway. Opening between posts is is 11ft 4 Concrete width is 10ft, there is then some grass between concrete pathway and posts. Slight incline if the gate would be sliding, swing gate not as much of an incline. Open to different styles, but like to continue same sort of style as fence, but also open to heritage style gates. If electric, can connect thru the outside wall to a socket inside, there would be 2 lots of .5m concrete to go thru for embedding power cable. Thanks

Concrete drive way and steps

My driveway has some stains caused by stubborn car tyre marks. I will appreciate support in this matter.

Need to remove one oil stain off a driveway. Very fresh, only a few days old. Needs to be completely gone.

I need small area next to my driveway concreted. Budget is just a placeholder please provide quotes.

I would like to upgrade my driveway from gravel to concrete. Prep work required. Approx 100m square

Need a plumber to install channel drain to the driveway and to connect to storm water . Please quote fixed price and immediately available. Thank you

Perform Driveway concrete

I need someone go do driveway gate

Looking to get a portion of my driveway paved. Just from the gate to the start of the carport

Chasing someone to redo a small area of driveway 4.8 x 3.4 approx 16m2 - Need the old driveway cut up and removed - The curb cut to make smooth entry into driveway - concrete boxed and poured

Remove a 25cm deep and 4 1/2 metre wide concrete lip.

The gate closed as we were diving in and the lower corner of the metal gate frame has been bent slightly and the black plastic track it glides on has been broken. See images.