Find an experienced driveway repair contractor in Blacktown

Replace storm water drain in driveway

SCOPE OF WORK – DRIVEWAY PAINT (Total Area : ~650 sqm ) 1. Preparation • Inspect the entire driveway for cracks, oil stains, or loose debris. • Pressure-wash all surfaces to remove dirt, moss, algae, oil, and other contaminants. • Mechanically abrade or etch glossy or smooth areas to improve paint adhesion. • Repair minor cracks and surface imperfections using a suitable driveway patch compound. • Mask adjacent surfaces (kerbs, lawns, walls, garden beds, and garage doors) to prevent overspray or spills. 2. Materials and Products • Use a high-quality, UV-stable, slip-resistant concrete driveway coating suitable for high-traffic areas. • Colour to be confirmed by the Strata Committee (price for charcoal or terracotta to match the existing aesthetic). • Apply a compatible concrete primer/sealer if recommended by the coating manufacturer. 3. Application • Apply two coats of the approved driveway paint using rollers or spray equipment as per manufacturer’s instructions. • Ensure even coverage with no pooling, streaks, or thin spots. • Allow appropriate curing time between coats and before traffic use. 4. Clean-Up and Safety • Remove all masking, tools, and debris from site. • Dispose of waste materials responsibly. • Leave the site clean, safe, and ready for use. • Place temporary signage or barriers to restrict vehicle access until paint is fully cured. 5. Warranty • Provide a minimum 2-year warranty on workmanship and materials, subject to normal wear and tear.

Almost 10 to 15 meters Video attach Pleae see and share your quote Thanks

Redoing a retaining wall and need concrete pumped in to fill gaps under driveway. Approx 20 metres. Price will be agreed by both parties. Just put any price to post task as unsure in pricing

Need soil and rocks taken away from my driveway

Move external wall 1 meter to increase driveway width.

Epoxy flooring for single garage and paint driveway. Garage is 3.6*5.5 m

All Materials for a gate is already supplied. The panels seen in the photo are actually 2 aluminium fence panels which I'm hoping to assemble as a double swing driveway gate (or slide). I need labourer to help advise me and install them on an existing concrete drive way. 2x 2.4m Width + 1.8m High panels

Remove current kerb and concrete new entry for caravan

Little bit of concreting in the driveway and and guttering

I would like to replace the cracked section on driveway with new concrete same pattern and colour as existing one.

I need a skilled concreter or handyman experienced with small patch repairs to fix damaged edges and post bases on my driveway, before a Spray Crete resurfacing job on Wednesday (weather permitting). The repairs must be completed on this Tuesday (weather permitting, weather forecast seems to suggest sunny) so the new resurfacing spray crete can be applied the next day. Scope of Work: 1. Repair damaged sections along the driveway edge and around fence posts (see attached photos). • Fill and rebuild edges where concrete has chipped, broken, or eroded. • Shape edges to match the profile as closely as possible. 2. Material specification: • Use Rapid Set Cement All for patching (available from Blacktown Building Supplies), unless you have a strong reason for an alternative (please explain if so). • Use a suitable bonding agent (e.g., BondCrete) to ensure proper adhesion. • I can provide the Rapid Set Cement All and BondCrete, unless you have your own supply. Quote should exclude these if I buy them. 3. Surface preparation: • Remove loose concrete, dirt, and debris from each repair area. • Apply bonding agent according to manufacturer’s instructions before patching. 4. Finishing: • Smooth and shape the surface to blend with surrounding driveway. • Ensure patch is fully cured, level, and solid before resurfacing crew arrives the next day. Repair Locations: 1. Circular cut-out around gate post – fill and blend to match driveway level. (Photo 1) 2. Broken edge beside gate post – rebuild flush with driveway. (Photo 2) 3. Large corner break near opposite gate post – rebuild missing section to original height and shape. (Photo 6) Notes: • Driveway resurfaced on Wednesday (unless it rains), so timing is critical. • Job completed to a standard that allows resurfacing. • Please bring your own tools for concrete mixing, application, and shaping.

Install 3 units of 1.2m each driveway ramp using masonry bolts and joiners (available). Get your drill 10mm, hammer and other tools to bolt to the gutter. Quick job, should not take more than an hour.

Need the drive way painted red brick colour

Need someone who has the right tools, to install driveway lights. Please look at the photo attached. There are four lights and they come with screws, and i need it to be drilled onto my driveway (which is concrete)

Driveway extension to make it a rectangle - visit and quote/negotiable less than 4 square meter concrete area with reinforced metal mesh as vehicles will be parked.

I have pavers at the moment ( see pics)..need these to be replaced by dark coloured concrete. Will finalise Price based kn quote.

High pressure wash of roof and driveway/walkway. Need someone who is qualified and licensed.

The driveway gate has been damaged due to strong winds and needs the following fixes: -Top hinge/screw has come loose from the wall needs to be re-secured. -Bottom drop bolt is not locking properly, needs adjustment or replacement. -Gate lock is broken – needs to be replaced.

I've recently had some plumbing work done underneath the driveway. I am after concrete, stencil and color of 2 square patches or openings to match the existing concrete on driveway. Please see photos Need the work done ASAP.