Find an experienced driveway repair contractor in QLD

I’m looking for an experienced concreter to reshape a section of my driveway in Tarragindi. The driveway rises for about 3 metres, then drops towards the house. My car scrapes underneath at the crest where the concrete meets the grass. I’d like you to inspect and measure the driveway, then recommend how much needs to be cut out and rebuilt to create a smooth transition. Please explain how you’ll check that the car can clear it when entering and exiting before you pour. Please include labour, materials, cutting and disposal of the old concrete, excavation and base preparation, and reinforced concrete with a slip-resistant finish. Itemise any drainage work or other extras. This job is for the crest only. I’m planning a single carport later, so please keep that in mind when setting the finished levels. Please include your experience with sloped driveways, photos of similar work if available, and your availability.

I’m looking for someone with experience to design and construct a custom bin enclosure for three-wheelie bins at the front of my house. The goal is to completely hide the bins and create a clean, modern, premium-looking enclosure that blends seamlessly with the existing white rendered walls, fencing and garage. What I’m looking for: * Enclosure to accommodate 3 standard wheelie bins. * White rendered or similar smooth-finish side walls to match the house. * White slatted or louvred front doors, preferably durable, low-maintenance material. * Flat white top to completely conceal the bins (option to have it on a hinge as well for easy access to put stuff in the bins) * Hinged doors with quality handles and fittings. * Easy access to remove and return bins for collection. * Weather-resistant materials suitable for outdoor conditions. * Professional finish that looks like a permanent part of the house rather than a standalone bin storage unit. I’ve attached photos of the existing area and concept images showing the style I’m looking to achieve. Please provide a quote including labour and materials, along with examples of similar work you’ve completed (if possible) I’m open to recommendations on materials and construction methods to achieve the best result at a reasonable cost. These are the measurements that I did, to give indication of size. L= 2450mm W=715mm H=1450mm

Tree trimming of overgrown branches in a bush driveway to allow access for up to 4 m high from ground clearance.

Install concrete crossover from road to driveway and remove existing rubber platform crossover

Looking for Supply and installation of 60 sqm of wet-look aggregate concrete for the double-car-parking driveway and front entrance area.

Remove existing concrete driveway and supply and install boral pearl exposed aggregate concrete. Approx 30sqm.

I'm looking for someone who is able to put in additional section of my current driveway in cement so I can put in two vehicles under the carport. It's roughly 9 metres in length and under metre in width. I've attached pics as reference of where I want the extra cement to go in blue and black.

Need some tiles on drive way replaced

Common driveway tiles need replacing that are cracked and broken . Probably about 8 tiles

Concrete in 2 Stainless posts or similar on either side of a driveway to support a chain that can be locked

Needing oil stain removed from driveway

Fix the seal in two tiles on driveway

We have a double car gate which sits on an aluminium runner the wheel is scrapping and needs replacing gate is sticking

We’ve got electric swinging driveway gates (Centsys brand). They’ve stopped working. Had a sparky out and he said it’s likely the gate motor as there’s no issues with power to it. Happy to fix or replace and not fussed on branding, as long as it works.

I want to install these solar powered cats eyes. One went in easy (new cement) I tried to install it into the more established cement driveway and I only get like 20mm down before it just stops. I need better equipment. Can someone help me out?

We need a small reinforced concrete slab constructed beside our driveway, against the house/boundary fence. The finished slab needs to be approximately 1100mm × 450mm × 100mm thick and completely level/flat, as it will be used as a base for gas bottles. Work required: * Saw-cut and remove a small section of the existing concrete driveway to create sufficient space for the slab. * Existing driveway is approximately 100mm thick. * Approximate saw cuts required: * 1100mm long * 120mm long * Remove and dispose of all cut concrete/rubble. * Excavate/prepare the area as required and provide a suitable compacted base. * Form up the slab. The house/boundary side can form two edges of the area, with formwork required to the remaining exposed edges as appropriate. * Install steel mesh reinforcement, adequately supported within the slab. * Pour a 1100mm × 450mm × 100mm reinforced concrete slab. * Slab must be perfectly level, despite the adjoining driveway being on a fairly steep gradient. * The new slab must not follow the slope of the driveway or simply be poured onto/joined to the sloping driveway. * Neat finished edges and surface. * Remove all waste and leave the area tidy. Access is straightforward from the driveway. I’ve attached photos showing the location and the section of driveway that needs to be cut. Please quote including labour, concrete, reinforcing mesh, formwork/base materials, concrete saw cutting and removal/disposal of the old concrete. Please also let me know if you have experience with small reinforced concrete slabs and whether you have your own concrete saw/equipment.

We have a pile of clay and dirt leftover from filling in holes in the yard. We need help to remove it and you can either take it or place around yard

Looking to replace 3 colourbond panels and posts with a large double swing gate ~6m

The soil is a mix of good and clay with a few bricks, a few small roots. Good for landfill. You will need a excavator to remove it.

Just need some driveway lights installed please. 2x holes (on each light) which need to be screwed into driveway. Very easy job. Just don’t have the masonry drill bits. Total of 4 lights. Already have screws and lugs.