50 Drafters in VIC

Drafting to Cover 2 items - converting existing alfresco to make it as living room and 2nd - building a new pergola

I need an architect to Extend my house and add bathroom. They need to be registered. Thank you

Drafting / Engineering drawing for an Alfresco extension 4.3X 2.0 mts. To submit to council for permit.

I want to increase the height of my front fence. It is currently a rendered stone/brick fence so would like to add height. Building permit from council required

Hi we have already built a fence with roller door, four years ago, however need a retrospective building permit from Brimbank Council. Therefore we need a drawing of the existing fence and door to submit to council for said permit thanks

12m x 4m granny flat design with measurements to give to builder for quote.

Need drawings for an existing pergola structure that we want to put a roof on and convert to a verandah

I need to add a bedroom and ensuite to my home and need help with drafting, council approval etc. On a tight budget. Also including demolition of internal loadbearing wall to extend dining area, and demolition of wall btw shower and bathroom to create larger bathroom.

Need house plan drawn up with extension and reconfig bedrooms inside. Would also like the plans to include a pool.

A circa 1950s residential house in Reservoir. Within the next 6-7 months we'll be doing an extension from the rear of the property. We need architectural drawings to provide to builders (for quotes and construction) and to council for approval. I've created a Sketchup model of our desired build. My measurements I think are fairly precise, however I suspect you would need to do your own measurements to make sure... We have never had a schematic of the house to begin with, except for the rough one provided in the section 32 when we bought the house in 2015. I'm an animator and illustrator, but I'm unsure about how much a draftsperson might charge. So although Airtasker is asking me to define the amount, I'm willing to negotiate. Cheers Jamie

Hi, I need a subfloor plan drawn up showing where the stumps and bearers are in an existing house. I have plans of the ground floor of this house in autocad and pdf. This will help you as the dimensions of the house have already been measured and are on these plans. Please look at the attached random subfloor plan from a house build in Queensland. Notice how it shows where the stumps and bearers are, with measurements, and in relation to the existing house. What you produce does not have to look like this, but it needs to show that information. I have removed two plinth boards from the side of my house and it is possible to look underneath and take measurements. Please note: I can also guess at how far apart the stumps are. I need to know how many stumps there are, and where they are. This has to be measured in person.

I am re-posting as my previous task expired before I could respond to offers. Require set of plans to obtain building permit for small 70m2 (ground floor) extension.

I want to stop any air coming from my internal cavity slider door. Door would need to be removed and cavity to be sealed somehow without affecting the door functionality

I want to build a carport

Hi, we are adding one extra room, to the side of the existing house, not attached but touching. It will be an independent open space (with a bathroom and kitchenette) on stilts, also acting as a carport. I have a sketch prepared by my father who is a civil engineer. I require a qualified drafts-person to: 1. Do one site visit 2. Improve our drawing with 2-3 cost-effective versions 3. Obtain council approvals on our behalf IF POSSIBLE. The following are required: - all necessary plans and drawing for construction and council approval - all steps/checks/actions/certificates/inspections etc. required to obtain council approval Thank you!

We need a registered draftsperson who has experience drawing mechanical ventilation systems to prepare some drawings for a building permit. The project is a cool room panel enclosed food perparation room, 150sqm. We are installing one 800L/sec ventilation fan mounted on the roof. There will be some simple duct work into the cool room and some make up air relief vents. We already have drawings of the room and the building to work from. The draftsperson must be registered.

need ideas on what is and what is not possible on a multi unit townhouse site

Updating our bathrooms currently two independent uni-sex rooms opening to a hallway. Each with toilet & hand basin, one with shower. We're wanting to provide a walk in shower in each bathroom, plus toilet, hand basin plus space to change in each bathroom. Both to remain uni-sex. We need Builders Drawings and have CAD of existing bathrooms to work from.

Hi, I need plans done for a shed slab, 10m X 6m, for building surveyer

Lots of cold air coming through front door. All sides of the door are letting in the air (and base). Weather strip/seal etc as necessary to seal it all off.