Find a local electric car service expert in QLD

Hi I need an auto Electrician to install REDARC Tow-Pro Elite V3 Electric Trailer Brake Controller in my Isuzu MUX 2025 for my caravan , pretty straightforward.

Looking to get electric brake controller fitted my Mitsubishi Pajero ASAP please do we can tow our horse float. 4/10/26, 5/10/26 or 6/10/26 :) Please quote for supply and fit! Can bring to you.

Check engine light is on with OBD-II code P0743 (Torque Converter Clutch electrical circuit fault). I am looking for a quote to diagnose and repair this issue (likely testing the TCC solenoid circuit and wiring, and replacing the solenoid if faulty). Could you please provide your diagnostic fee and an estimated quote range for the repair? Thank you!

Just put in new alternator in 2005 Honda accord. Won't start, need help figuring wiring/electrical issue

Carvan - Needing someone to come and look at my solar panels check voltage etc. Giving it a service making sure everything is working correctly charging correctly etc. just needing to make sure everything is running for up-and-coming camping trip. Will need to have experience with caravan electrics or qualified.

Our reverse and break lights aren’t working on horse float we need them fixed before Sunday as we have to take it to a horse riding camp

I have a truck there is something wrong the head lights went and gps system

1963 Carapark Caravan requiring troubleshooting for brake lights, indicators and 7-pin plug issues. I have had basic attempts at fixing connections however to no avail. Need this done today 15/9 or tomorrow 16/9..

I’m looking for an experienced mobile mechanic or auto electrician to come to Archerfield and diagnose/repair my Holden Captiva. I need someone who is familiar with Holden Captivas and has proper diagnostic/scanning equipment to identify the fault. Please bring the necessary tools and equipment to diagnose the vehicle on-site. Location: Archerfield, QLD Vehicle: Holden Captiva Job: Diagnose fault and advise/repair where possible Please send me your availability, call-out/diagnostic price, and let me know if you have experience working on Holden Captivas. Looking for someone as soon as possible. Thanks.

Wiring up 3 gauges and a Apple CarPlay headunit on my r33 skyline

I have a RFN SX-E15 that I need built and set up.

I have a 2010 Mitsubishi Colt, I bought from a guy who said there were no problems. Anyway, attached are the OBD2 readout of the fault codes. What I did: - I have a spare pedal position sensor assembly. I swapped it out from a working vehicle. Didn't fix it on the faulty vehicle. The working vehicle then had the corresponding codes for pedal position codes. Which later cleared on the working vehicle. - Tried to replace the throttle body for the throttle body codes, but that was a slightly different type, so that didn't workout. The throttle position sensor is not serviceable either, epoxied in, so, unable to go down that route. Without the guarantee of a fix, I didn't want to spend the money for new throttle body either (given the experience with the pedal position assembly). - Attached screenshots of OBD2 error codes. Sometimes there's 2-3. Sometimes there's a whole set. Diagnosis in the manual starts through checking the lines from the ECU. Maybe someone more experienced can get to it faster than I can.

I brought a pod camper. Wiring was fine until I took it apart and then can't put it back together. There are three LED lights that should be working, inside, side & rear. You'll need some extra wire & crimps (burnt a wire) I don't want to get ripped off, if someone knows what they are doing it should be easy - that person isnt me... Clearly

I have damaged my drivers side care seat in my MG HS Plus EV. I have bought a replacement and I need to have the old drivers side car seat removed and the new one installed. The car seat is electric.

Passenger side window won’t go back up. Unsure of fault. Just need window to go back up, doesn’t need to work. If able to repair back to working condition, great.

I need someone to inspect and repair the electrical wiring on my 4x6 box trailer. The trailer plug is damaged and the lead/wiring may need to be replaced. I do not have a replacement lead or plug, so the successful tasker will need to supply any required parts. The job includes: * Inspecting the trailer wiring and lights * Replacing the damaged plug and lead if required * Repairing any damaged wiring * Testing all indicators, brake lights and tail lights to ensure everything works correctly Please include labour and parts in your offer, or clearly state any additional parts costs.

Car: Ford Falcon FG G6E, auto Problem: the shift selector cable bushing at the gearbox end has let go (a common Falcon fault). RACQ has already attended, confirmed it's the bushing, and manually put the car into neutral. Before that the shifter was sliding through P/R/N/D doing nothing and the dash was stuck on P. Just need the bushing repaired. It's in an underground residential carpark in the Brisbane CBD city - height clearance is 2m. There's a couple of security gates so I'd need to jump in on street level and guide you down.

I got a new number plate holder and I need the numberplate light wired up so it can be plugged into my bike

Injector pump not receiving power. Auxiliary battery not charging

My John Deere ride on LT180 is running but recently it just stopped. I charged the battery and won't even turn over when I turn the key. Looking for someone to come and take a look at who knows how to fix electrics/starter issues