Find trusted car battery replacement experts in NSW

Have an off-road camper, came with solar and Anderson alternator set up, input in a 12v25a Victron charger, didn’t run it through shunt, all the stats in the BMV are wrong, need someone to come have a suss and fix it up.

need a auto electrician that works on LDV and can wire up a light bar

I have a Royal Enfield 650 Continental motor bike. 4 weeks had a new battery installed, fuel lines cleanedand petrol tank drained. Bike parked outside with cover. Did not ride for two weeks and now battery is flat! Need you to check that there are no leakages and may be install a kill switch to preserve battery.

Got new ute canopy need the central locks hooked up to central locking system in ute so it's on one button all ready to run wiring to ute system

Description: I have a 1979 Chevrolet G20 Van with an aftermarket sound system and reversing camera that have both stopped working. Both systems appear to have lost power, likely due to a wiring/disconnection issue after iw as playing around bac there The wiring behind the dash/rear is currently messy and needs to be properly traced, cleaned up, and restored. What I need: Diagnose loss of power to stereo + reversing camera Repair / reconnect wiring properly (not just a temporary fix) Tidy and organise existing wiring loom where possible Ensure audio output is fully working again Optional bonus: troubleshoot and fix non-working horn Vehicle notes: Older vehicle with aftermarket modifications Prefer someone experienced with older vehicles and non-standard installs Looking for someone who: Has experience in auto electrical work (12V systems) Comfortable troubleshooting messy aftermarket wiring Takes pride in clean, reliable work (not quick patch jobs)

Chasing an auto leccy to tidy up some wiring on the front of my caravan (external trailer plugs ect)

Hi, I’m looking for a qualified auto electrician to diagnose and repair trailer light wiring on my 2015 Ford Ranger. The trailer plug currently has no output. The trailer wiring loom was previously replaced when I first bought the vehicle, but the issue has returned. I’m after proper fault finding and repair — possibly wiring, fuse, module or earth related. Located in Maitland. Please let me know availability and roughly what diagnostic cost would be. Thank

Install supplied boot and 2x window switch on 2020 Mercedes-GLE. Switch is working/replacement part supplied. Job is trim removal, unplug old switch, fit new switch, test. Must use plastic trim tools and avoid marks/rattles. Located Bronte.

I have a 1991 landcruiser 80 series, when I plug a charger in the lighter socket it trips the radio and clock that are directly above it on the dash and all three don't work. When there is no charger plugged into the lighter socket the radio and clock work fine. I assume there is a short behind the dash so would like someone to fix it.

Got a 1996 Hiace 1kz te that’s needs a bit of maintenance before I can take it in for a blue slip inspection Currently I like help with following below. Clear codes 39 for fuel pump tempture sensor Tidy and crimp some wirring lume connected to plugs Code reader would be essential Check overall engine for anything else that it might need to be done for blue slip inspection Currently

I have a Holden Colarado ute front seat stuck in down position. Backwards and forwards and up and down work. Is there a way to get it upright

2013 Hyundai i30 currently fails to start and just clicks as I turn the ignition on. Need some help troubleshooting what the problem is. Car is parked in apartment parking

Looking for an auto electrician or someone experienced with automotive wiring to wire aftermarket Raxiom sequential tail lights on my 2017 Ford Mustang GT. This is a USDM to AUDM tail light conversion, so the brake and indicator signals need to be combined correctly for the sequential indicators to function. The tail lights are already installed and the wiring is accessible in the trunk. Just need the wiring completed so running lights, brake lights and sequential indicators all work properly. Located in Erskine Park NSW

Looking for an auto electrician to fit redarc towpro to hino300 I've got the wiring harness and the unit ready to go Truck has towbar and 7 pin plug already

Looking at getting a reverse camera installed, pls give quote for supply and install

camper Trailer plug needs to be changed 7 pin plug

Need professional auto elec to see why I not getting full voltage have replaced alternater battery Need pro with the right tools need done asap afternoon

I have a 1993 ED Ford Falcon and need a immobiliser bypass to be wired into the BCM I have the bypass module and full instructions.

Ford ranger pj 2008 4x4 diesel. No crank no start. Ignition switch changed no start. Battery has been replaced Mechanic jump started the car from the starter. Fuses look good. Don't know about the relays and if powers getting to them

I need someone to identify the sources of power in an ex ambulance Mercedes Benz Sprinter and understand how healthy is the wiring.