Find a local Tasker to inspect your Toyota in West Melbourne

I’m after someone who knows their stuff when it comes to exhausts and mufflers. I want a muffler extension fitted to my 2022 Toyota RAV4 — everything on the car is currently stock. I need you to supply the extension, install it, and advise on the best option for both look and sound (nothing crazy loud, just a clean upgrade). Details: Vehicle: 2022 Toyota RAV4 Current setup: Completely stock Task: Supply, recommend, and install a suitable muffler extension Location: Truganina, VIC 3029

I would like a DDPAI z60 dual channel set installed to my prado 250.

i need to get the key for my car toyota aurion 2009 just one key car is turn key and location truganina

I need to install this car display unit replacing the original old one. Need to bring your tools, wires, socket and anything which is necessary to complete the task. I am flexible with other models as well feel free to advise or give me some option.

Please read it very carefully as some of the diagnostic has been done and from below finding it shows possible short somewhere in harness. Need a qualified auto-electrician to trace and repair the intermittent short in the low-beam wiring harness, likely between the fuse box and left headlight branch. The left low-beam fuse (15A) keeps blowing on my 2012 Camry Altise. Extensive diagnostics have already been done — issue is likely a short-to-ground or cross-connection in the wiring harness between the left and right low-beam circuits (after the fuse box). Work done - Replaced both low-beam bulb holders and tested bulbs — both good. Swapped relays and fuses — no faults found. Fuse only blows when relay is installed and headlights are ON → confirms short on load side. Checked relay socket and fuse-box underside — clean, no corrosion or melting. Confirmed electrical continuity between left and right low-beam fuses (shared circuit). Verified continuity across both low-beam bulb wires (even with left unplugged). No physical modifications made to wiring — only diagnostics. Detailed Diagnostic Results: 1. Fuse box & relay tests: •Removed H-LP relay, battery disconnected. •Checked continuity across relay socket pins → no shorts detected. •Bench-tested relay separately → working fine. 2. Fuse-slot continuity test: •Checked between left & right low-beam fuses with battery removed → no bridging/melted contacts. 3. Current draw test (inline fuse loop): •Headlights ON, measured with multimeter in DC amps mode. •Right low beam: 2.67 A •Left low beam: 4.4 A •Both within normal halogen range (no overcurrent). •Suggests intermittent short to ground, not continuous overload. 4. Fuse socket condition: •No corrosion, no looseness, no melting.

Need to replace the Toyota corolla 2009 model car ignition lock and get new keys because the existing ignition lock is jammed. Price is negotiable

Steel bull at on Toyota hilux 2.8 D4x4

Toyota camry altisse..windscreen

Hello all mechanic please provide me reasonable quote to change the 2007 toyota yarris car timing belt change

I need 3 channel (Front, Rear and Interior ) dash cam to install with hardwiring to my 2019 Toyota Kluger

Need a roadworthy certificate for my car.

I am about to buy a Toyota Hiace 6.0 LWB, 2008, diesel, manual transmission with 180 000 km on odo. I would love to hire a mechanic to help me check more technical aspects of a car before a purchase. Thank you! :)

Need to get my car window tinted. It’s a Sydan Toyota Corolla 2019 and never been tinted before. Available tomorrow and on Sunday

Title: Install Head Unit, Dash Cam, and Subwoofer in Toyota Camry 2008 Altise Description: I need a professional to install the following items in my Toyota Camry 2008 Altise: • Pioneer DMH-A5450BT Head Unit (with Apple CarPlay & Android Auto) • BlackVue DR750X-2CH Plus Dash Cam • Pioneer TS-WX305B Subwoofer (1300W Max) All items are already purchased and ready for installation. Looking for a clean and professional setup with proper wiring and integration. If any extra wiring, fuse, or RCA cables are required, please let me know in advance. I can either supply them myself or pay the installer to provide them. The installation must be completed in one day (single session). Budget: AUD $350 – $400 Location: Melbourne Cairnlea vic 3023

My 2006 toyota hilux has an old head unit and I want to replace it with a new one. There is a reverse camera already installed in car and microphone so I'd like these connected to head unit so I can make hands free phone calls.

Looking for a mechanic to supply and install front & rear brake pads and rotors/discs for my Toyota Camry 2009. Please include parts + labour in your offer.

Install this auto head unit into my car

Got a headunit for yaris 2008 and need assitance in installing. Its has got all wiring and reverse camera as well.

I need my Toyota Camry 2025 towed from Braybrook to the other side of Braybrook

Hi, I have a reverse camera foe a Toyota Alphard that I want to install. It is a car play android and camera kit. I just need a hand to install it from someone who can do a professional job.