Find a sockets and switches installation professional in Inner West Sydney

recently had the benchtops installed. When the old benchtops and cooktop were removed, I discovered there wasn’t an actual power socket in place — the cord was simply running up into the wall cavity (apparently well over a metre). I’m hoping to have a power point installed with 2 sockets one each for the oven and gas stove

Hi looking for a licensed electrician for support on the following: - Replace 1 light switch - Replace 1 powerpoint - Replace dedicated circuit and wiring for the breaker. Please share your quotes. Further details will be shared via DM.

I need these light switches replaced. I have new ones from trade co so it’s just an easy swap over.

#1 - loose switch. Screw threads have been completely stripped inside switch #2 - heat switch button has been pushed in by someone and no longer working properly #3 - loose switch

Bathroom: replace switch panel with 3 switches (light, heat lamp and fan) Hall: replace power point (2 socket) Dining: replace power point (4 socket) Bedroom 1: relocate light switch to other side of door Bedroom 2: relocate light switch to other side of door. Gyprock has been removed behind hall and bathroom walls, meaning cabling is visible and accessible.

4 broken light switches. 2 of them have a broken switch which needs replacing (see pic) 1 of them is missing a light switch cover (see pic) 1 of them works perfectly. Except the on/off switch setting is upside down and I would like it corrected. Looking for someone to replace them and fix the upside down light switch.

Replqcement of: 3 x double point sockets 1 x single switch 2 x 2 gang switch Happy for the parts to be supplied + install or just install only. In the event of supply- the parts need to be white and slimline switches & power points. Expexted cost unknown so please advise

Need to change powersocket.No power supply.

Replace two double power points, change down light and one heat globe in IXLTastic, fix two light switches - one that won’t go on, the other sometimes doesn’t go on. Supply and Replace one bedroom and one Loungeroom GPO with Clipsal C2000 Double GPO: Replace Two Clipsal Switch Mechanisms Supply and Replace Hallway Downlight with SAL Wave 8W Tri-Colour Downlight Supply and Replace Heat Lamp in IXL

[note: registered electricians only] We have 3 ceiling lights (that look like picture 1). We need those replaced with 3 new ones we've bought (they are pendant hanging lights also, with a support cable and electrical cable coming from a round thing that attaches to the ceiling). For the two bedroom ones, we'd like the standard on/off switches to be replaced with dimmers; the ones we have go all the way down to zero and that is very important. The beveled style of the plate/dimmer should match the in the photo, they should be fairly standard I hope.

Require licensed electrician for a couple of jobs. 1. Replace 2 x LED baton lights. One is flickering and we found out it has no bulb. We think it might need to be replaced with a version that has bulbs so we can fix ourselves in future. They are about 1200mm (pictured). 2. Replace old wood light switches x 3 (pictured) with modern white light switch 3. Two x dimmer light switches both broke in the same way, with the dimmer button coming off. Need to be swapped out for more reliable version. Also request no back lighting in the new switch.

Hi I have a few broken light switches and hoping to have all of them replaced with new ones Thank you

Replacing broken two light switches. I have bought the light switches so i need an electrician to replace them

My power plate machine rattles. It switches off after a few seconds. Sometimes works well, sometimes dowsnt switch on. Have tested several plugs and cables alreay.

One of the switch on my main power board keeps tripping off. It’s directly connected to kitchen electric goods such as gas cooktop. The issue started when the gas cook stove started clicking continuously and then it stopped. When I went to see the power board the switch off and after trying number of time to switch in it keeps switching off.

1. Replace 4 oyster ceiling lights with new pendant lights that are in their boxes and ready for installation. Images added. Plus change 4 wall switches with dimmer switches. Photos of old wall switches have been added.

The switches for the heat lamp and fan in our bathroom have stopped working due to a loose connection and need to be rewired.

Replacement of led light switches and PowerPoints, materials supplied, approx 15

The light switches in the attached photo are broken and have been pushed into the wall. They no longer function properly. I'm looking for someone with electrical experience to replace the entire switch unit, including the cover plate. Please bring the necessary replacement parts (3-gang switch with LED indicators, standard size) and your own tools. A quick check of the wiring would also be appreciated to ensure everything is safe and functional.

I need to replace my key switches on a limited edition Deathadder essential, there fore I need someone to desolder and , reolace with new key switches and put it back together with no damage