Find a professional planter box contractor in Melbourne Western Suburbs

Build - from flat packs - 2 corten steel planters boxes and place on driveway area, as instructed. There is plenty of space to build them near where they’ll be placed.

I have some planter boxes that are already mostly built and finished. I’m looking for someone to install a false/raised bottom inside the planter boxes to reduce the amount of soil needed to fill them. I already have the timber required for the job, as well as a nail gun, compressor and nails. The job will mainly involve measuring, cutting and securely installing the false bottoms. The planter boxes are already assembled and accessible. You’ll just need to bring any other basic tools required, including a saw for cutting the timber. Looking for someone with basic carpentry/timber experience who can get the job finished neatly.

Timber frame needed to encapsulate existing corrugated metal planter box that is bowing. Have timber and screws already. Looking at 3mL x 800mmW x 1.8mH roughly.

I’d like some planter boxes to near my decking at the same address . Also if they can be restored that would be good too Images for reference

Needing a plantar box along the fence with bench in between , size of 6mx0.6m

Front decking and planter boxes to be painted, paint and equipment supplied

Job Title: Build Hebel Planter Box Description: I’m looking for someone experienced with Hebel block/panel construction to build a planter box in my garden. Planter dimensions: • 760 mm long • 200 mm wide • 800 mm high Requirements: • Construct planter box using Hebel blocks/panels with Hebel adhesive. • Ensure box is structurally solid, level, and square. • Add drainage holes/gaps for water flow. • Apply waterproofing membrane inside the box.

I want to build a planter box with bricks and render it. Length 5.5m width 40 cm height 50 cm approx dimension. Please give a quote

Need to get a planter box installed

Need someone who can build a planter box. Wood available & other materials will be supplied by us (please let us know). You need to have the necessary tools. Something that looks like the attached photo but maybe lower as it’s intended for a kid but needs to have legs (raised)

We need a brick layer to build a brick planter box 7.5m x 1.5m. Height is 650mm.

I need approximately 15 wheelbarrows of dirt moved into a planter box that’s only a couple of meters away from where it needs to go. - Due date: Flexible

Planter box (cumaru) ~250cm x 35cm Deck (cumaru) ~350cm x 300cm Would like to get deck cleaned and restained/oiled Please supply all equipment and stains - Due date: Flexible

I am looking for a Brick layer to build Brick planter boxes. One is Height 600mm x 6.5m long and another one is 2.5m long in triangle box. - Due date: Flexible

Someone with skills to assemble 6 x steel framed wicking beds. I provide all materials, including gal steel frames, timber cladding,waterproof liner, timber oil, base etc. I will show you how to assemble, there are a few tricks involved. Note timber cladding is repurposed pallet timber which needs to be cut and oiled. Ideally you will be able to build at your place with your tools such as dropsaw. Or I can supply. Job starts when steel frames are ready in the next week or so. Meet at my yard 15 mins from Werribee. May be ongoing work for the right person - Due date: Flexible

The timber at the bottom of one section of my planter boxes broke apart, most likely due to wetness over time. This caused the soil to fall through. I need help with two things: (1) replace the broken timber plank; and (2) put in another layer of timber planks along the bottom of all the planter boxes as reinforcement. The length of the planter box altogether is around 3.5 m, and 1.5m wide. The timber planks may need to be screwed in from the bottom rather than the top of the planter boxes. - Due date: Needs to be done on Monday, 2 October 2023

I would like a lightweight wire cover made to fit inside an existing raised garden bed. Approx. measuring 195cm W x 45 cm D x 70cm H. Thanks! Type of gardening: Other Size of garden: Under 50m² Has green waste bin: Yes - Due date: Flexible

Two planter boxes should be installed. - Due date: Flexible

Build a brick planter box approx 2.5m x 0.7m on the sides (4 sides) and 0.5m high. Footings needed. Rendering needed of 3 visible sides, the top and maybe 10-15cm of the inner 4 sides. I can organise the concrete bricks, mortar and render mix but may need some guidance on quantities. To be built approx 1m back from the corner along the wall. - Due date: Flexible

The steel sections from my planter box is too high, need to be cut. There are 9 of them to cut.