Find a professional planter box contractor in Inner South Melbourne

Need someone to cut and remove the plants in the three planter boxes seen in the pics.

Need two down pipes plumbed into existing drainage points. All material onsite. Both have 4 x 15 degree bends and joining couplers ready to go.

Moving soil into planter boxes, most of this will need to be by bucket. Moving debris from front of house to back and putting into planter boxes.

Painting wooden planter boxes, touch up fencing and base of deck area, roller an already painted brick wall. Please see photos. Will need 2 coats. Paint and paint brushes supplied. Do not need to be a professional but do need to know what you are doing.

Assembly of 9 Greenlife planter boxes 1200mm x 300mm x 300mm

I want these bamboo plants removed from the planter box (roots included- not just cut down to ground level) These are the clumping type (not the invasive spreading type with runners) I’d like all waste removed too I’ve partly done one of them which you can see in the photos

Looking for an experienced carpenter to quote and build a custom elevated timber structure. Dimensions: Approx 4m wide Approx 600mm deep Scope of work: Remove existing steel mesh and planter Build a single continuous timber unit across full span Left side (majority): large storage box Top-opening lid Accessed from the rear (house side) Right side: integrated planter box Structure mounted to existing brackets (or upgrade if needed) Build requirements: Weatherproof - ish Outdoor-rated timber (or composite if recommended) Clean, modern finish (ideally natural timber look) Structurally sound for long-term outdoor exposure Images. what's there now: Steel Mesh storage box and pot plant 2nd image is similar to what I'd like.

Build timber around metal planter boxes. 7 are on a sloped driveway (the structure underneath is already built). 3 are on the dirt. Just need the 4 rows of timber, around the boxes on all 4 sides. See photos for measurements. Soil is already in the the metal container but the metal planter boxes buckled so timber is just to make it look better. I will paint them. One box has been constructed, would like to continue with similar design. I need you to purchase the supplies and bring to location. I don’t have anything (and no tools).

I have leftover composite decking and treated pine posts. I need to hire a carpenter who can build couple of planter boxes. Sizes can be worked out. I’m Flexible I don’t have hardware materials ie screws and castor wheels

Lift planter box Including adding base - View all the details of this offer: https://www.airtasker.com/offers/01JHVCCH2H3MAEV4XES3DK0TTF

Hang 3 mirrors, hang two light fixtures from ceiling hook (no electrical attachment, two wall fixtures indoors. Outdoors install 6 solar lights on concrete walls, planter box garden hangings X 4. Attach small light curtain rail above kitchen door. Hang light fixture from ceiling X 2 (just for show, no electrical attachment required)

very heavy planter box, needs to be lifted up and stabilised higher as it currently not allowing water flow to the drain on the other side.

We have 8 planter boxes;- 152W x 370L x 66 H, 73W x 258L x 66H, 73W x 287L x 66H, 73W x 370L x 66H, 73W x 370L x 66H, 73W x 586L x 66H , 117W x 318L x 66H, 157W x 559L x 66H. They are wooden boxes currently grey in colour that require 2 coats of external solar guard paint.

Take out a tree from a planter box repair planter made from bricks and rerender

Looking for someone to restore an original art deco planter box at front of house, will need rendering and internals waterproofing.

Custom made planter box 250cm long x 13cm wide (or can be split into 2 or 3 so 125cm long each or 83cm each. Narrow space) Maybe planter box in between each post if that’s easier

Demolition of rendered masonry planter box. Planter box walls are either concrete block or brick work, they are connected to a base slab at the bottom. Operator to make a flush horizontal cut to remove the wall. Owner wishes to extend the deck over the demolished planter box. Material to be removed is 180mm thick, 500mm high and 4m in length. I believe it is unreinforced. Saw cut demolition to be determined by the operator, 9” grinder with masonry disc would work best for horizontal cut on the vertical wall face. Cutting at a minimum to reduced rubble and noise. Owner will assist with works as much as possible. Operator to cut and knock over block wall, complete finished horizontal cut so it is neat. Owner will remove materials, happy to negotiate a rate for operator to remove materials

Intention is to place planks of merbau timber over gap to convert into a bench/seat. If you measure, I can supply timber Due date: Flexible

There are just a few boards missing down the bottom. The task involves adding timber to attach the boards to, and then attaching the boards. You will need to bring a saw to mitre the corners. Timber and screws will be provided. Length is approx 4m in total (2m and 2m) and about 300mm high. - Due date: Before Saturday, 5 August 2023

Hi there, We have a small brick planter box that needs waterproofing. Happy to purchase supplies if that’s helpful. Many thanks, Simon - Due date: Before Sunday, 11 December 2022