Find a professional pergola installation expert in Gungahlin

Replace pergola roofing. With or without you providing the materials. Quote to replace them all (8 sheets in total) The sheet sizing are standard bunnings 3m x 0.860m wavy polycarbonate sheets. 8 sheets in total. Currently there are roughly 192 polycarbonate roofing screws with dome washers installed. It takes about 24 screws per sheet. Please also note, during replacing, there are some timber on the frame that are coming off that will need hammered back in with potentially additional regular nails needed to ensure they don't come off again due to high wind.

Hi, I need help replacing one broken piece of polycarbonate roofing on my pergola. Details: Only 1 sheet needs replacing. I will provide the polycarbonate sheet and roofing screws. You will need to bring all the required tools (e.g. high ladder, scissors to cut the sheet, ruler, drill, screwdriver, etc.). What needs to be done: 1. Remove the old sheet. 2. Unscrew and remove the old screws. 3. Cut new sheet to size (if needed). 4. Fit the new sheet. 5. Secure with new screws. Note: One piece of timber on the pergola is a bit rotten, which makes it hard to screw into. I’ll need your advice on how to secure the new roofing sheet without replacing the whole timber beam. You might need to attach a small piece of timber to it, or suggest another way to fix it properly. Location: Harrison, ACT When: Ideally Sunday afternoon after 4pm, or Saturday if the roofing sheet arrives in time. Payment: Please let me know how much you charge.

I need to change carpet of 3 bedroom, paint the house and build a deck and pergola outside

Damaged Laser light sheets on pergola

7 polycarbon sheets to be replaced due to hail damage. Will need uv and hail protected ones to replace them. New fittings around the side and nails to secure the sheets in place as well. Dimensions of total pergola roof is approx 5m by 2.4m.

I need to build the roof/shed.pergola roof for my backyard as suitable to my current decking. 3.8m x 3.5 m 2.5 height to gutter Please send similar sample pictures as well. Please include your materials detail. Supply and install cost or total cost.

Hi, I want to get a Deck in the back yard. Currently there is little concreate and soil (slopped) Open to offers, thanks 🙂

We have an unapproved pergola which was installed pre us moving in. Seeking to have this structure approved

Laserlite destroyed in hailstorm. Some woodrot in frame,hope it can be repaired

Hail damaged pergola roof Plastic sheets Need replacing

Looking for a pergola builder to handle the labour. I will provide all materials—just need someone skilled to assemble and install.

There is a dead bird (because of the recent storm) on the pergola that needs to be removed. The pergola needs to be accessed through a ladder.

Our polycarbonate roofing on the pergola got damage because of the hailstorm yesterday. I need it replaced. 5 polycarbonate in total to replace it.

Need a stand alone pergola purchased from Bunnings to be put together. All instructions in box

Screed roughly 25sqm suspended pergola. Screed to be 30mm at edges and 15mm at drain. Materials to be either supplied by contractor or myself. Screed finish to be suitable for waterproofing.

Need someone who can get pergola roof and installation for my small backyard. Thanks

Builder needed to assist in erecting a pergola on a balcony. Approx 4-5 hours work.

Replace pergola to maintain aesthetics of property. Current pergola had 7 rafters, 1 beam and 2 posts. The dimensions to the existing pergola are as follows: * Rafters (7) - 1.9m approx each * Posts (2) - 1.7m approx each, and * Beam (1) - 6m approx.

Replace a pergola at the front of my property to maintain the aesthetics of the property. The current pergola has 7 rafters, 1 beam and 2 posts. The dimensions of the existing pergola are as follows: * Rafters (7) - 1.9 m approx each * Posts (2) - 1.7m approx each, and * Beam (1) - 6m approx. .

Hi There, I would like to get a pergola build in my side yard. Cheers, S