Find a professional outdoor blinds contractor in West Melbourne

Outdoor Blinds to enclose the pergola from 3 sides. Including automatic ziptrack

Hang 4 customer supplied outdoor blinds

Outdoor blinds have come away from the track

Install 1 small 120 cm Outdoor Blind (Already Purchased) + Guide Hoops in Alfresco. Left side (pillar): The blind will be drilled and fixed onto the front/outer face of the alfresco pillar — the face that is visible when standing in front of it. The blind will slightly cover the front of the pillar when viewed straight on. This is a solid pillar so direct drilling is fine. Right side (wall): There is a wall on the right that runs perpendicular to the blind’s direction. An L-shaped bracket (may be needed) to be installed on this right wall to create a mounting point in the correct direction for the blind end to fix onto. Additional fittings: I also need 2 guide hoops installed — one at ground level and one at mid-level — to keep the blind held in position and prevent it from billowing or sagging. Please note: • Blind is already purchased and on-site • Masonry/brick drilling required • Tasker should be comfortable sourcing or fabricating a suitable L-bracket. Or guide me to purchase the right one before the installation date. • Please ask for photos before quoting — happy to send them

Blind has come off in high wind

I have a pergola I want to enclose with 8 outdoor blinds

I have 2 outdoor blinds that need to be put up , they will need to be drilled into the brick

Hang outdoor blind on edge of patio. Dismantle small outdoor shelf that is attached to patio.

Need to connect outdoor blinds motor to electricity in Alfresco area for a double storey home.

Need to screw up the outdoor blind

Hardwire 2external blinds

End caps broke off outdoor blinds

Two electric mesh blinds have come out of their tracks on one side due to wind. Needs a dismantle, put into track and reassembled. Fiddly job as near pool and fence.

After outdoor roll up blinds to be fitted

Need outdoor blinds supplied and installed for my outdoor area. Must include measuring, providing suitable blinds (manual or automatic), fitting brackets, and completing installation. Blinds should be weather-resistant and operate smoothly.

2 outdoor blinds plugs already wired inside attic- Needs to be plugged/wired inside attic to a electric point.. Pic of 1 plug uploaded... Electric compliance certificate required.

Hi I want to get install 3 blinds on my pergola. Pergola measurements are as follows- Height: 3 metres Width: 2.5 metres Length: 3 metres Can someone please give me a measure and quote for this?

Attatch outdoor blind to carport beam aprox 2.5mt high. Blind is approx 2.5-3mt wide. It is literally 4 drill holes . I can no longer install myself as i need a knee replacement, i also cant afford alot as im currently not working due to the injury but need this blind to stop the cold wind coming through

Please provide a quote for a dimmer compatible with four light connections, as well as a power cord suitable for outdoor blinds.

Had a post but was taken down as i must have responded incorrectly. Anyway i have an outdoor blind i need putting up and a gentlemen offered to do the job for a low fee. I am very interested please contact me again