Hire a professional home theater service in Central Coast

Assembly of 1x EST-05 Electronic Panel Stand (all required bolts and Allen keys included). An assembly manual is also provided. Mounting of the 65" touchscreen panel using 4 screws to attach the mounting arms to the back. The panel hooks onto the top of the stand frame and is then secured from the bottom. As its a touchscreen it does weigh more than a normal screen so you may need another person for the final lift onto the stand. Power connection: Connect the IEC cable from a GPO (general power outlet) to the base of the stand, then connect the IEC passthrough cable from the top of the stand to the rear of the panel.

Tv repairs lost picture near new 70 inch smart tv tLC model

Wanting someone too put a wall bracket on our wall please 🙏🏻🙏🏻 we have the bracket

Requiring quotes for some smaller jobs. The below shelf needs to be screwed back to the wall. There are two screw brackets, one on either side with two screws on each. Also need 2 TV’s mounted, one n the lounge and one in the bedroom, 1 is 150cms and the other is 112cms. Have brackets for the TV’s already.

65 inch tv which I have a new wall bracket for which requires installation. I also have a large mirror (1800 mm x 650 mm) which needs to be installed on another wall. The mirror has a hanging wire attached on the back, should just need 2 attachment points. Both walls have metal studs, 600 mm centres, 30 mm wide stud face.

Assembly of 1x EST-05 Electronic Panel Stand (all required bolts and Allen keys included). An assembly manual is also provided. Mounting of the 65" touchscreen panel using 4 screws to attach the mounting arms to the back. The panel hooks onto the top of the stand frame and is then secured from the bottom. Power connection: Connect the IEC cable from a GPO (general power outlet) to the base of the stand, then connect the IEC passthrough cable from the top of the stand to the rear of the panel.

My signal has been lost from upstairs tv. A antenna technician said i am on a multi system antenna with 9 other villas. Easiest option may be an internal antenna.

Need a TV mounted on the wall at the right height, level and secure. All power and HDMI cables etc must be run through the wall so nothing is visible. Final result should look clean, tidy, and well finished.

Need 75 inch tv set up today. TCL brand

Need a 56cm tv wall mounted on a swivel mount. After 5:30pm during the week or on weekends please.

Hello! I’m looking for a handyman to mount our TV on the wall and put back our wardrobe slider and doors in one of the bedrooms. The carpet will need to be cut to put the slider back. Photos included.

Mount a Samsung frame TV on wall, hang a mirror and 3-5 paintings on walls, secure a couple of sets on drawers to the wall and install three retractable baby gates.

Install TV bracket on wall. Install TV on bracket. Help move a large sofa up one flight of stairs. Help move a large chair down one flight of stairs.

Looking to mount a 75" tv on my wall.

We’re looking for someone experienced in wall-mounting large TVs, specifically an 85-inch Samsung Frame, in our living room at our new house. What the job involves: • Mounting an 85” Samsung Frame TV (mount supplied) • Accurately locating wall studs using a stud finder (essential) • Cutting neat access holes in the wall to conceal the cord: • Feeding the cable down behind the wall • Creating a second exit point at the bottom so the cord is fully hidden • Ensuring the TV is mounted securely, level, and correctly aligned Additional request: Once the TV is mounted, we’d also like you to check stud locations in a few other areas of the house so we know our options for hanging artwork, mirrors, shelves, etc. Important notes: • You must be confident working with studs and in-wall cable concealment • You’ll need to bring your own stud finder and tools • Two adults will be on-site to help lift and hold the TV onto the mount Please only apply if you: • Have proven experience mounting large TVs (especially Samsung Frame or similar) • Are comfortable cutting into walls cleanly and professionally • Know how to locate studs properly (no guesswork) Thank you!

Mount 65inch to wall. We already have the bracket. TV in image is not the TV that’s going to be mounted.

Hi, I need someone to go and buy a wall bracket from Bunnings ($49) and install my 50' Panasonic on the wall. I need someone professional in mounting TV (eg. mounting straight, ensuring the bracket is installed correctly as I have a toddler and don't want it falling on top of her etc). Bracket: https://www.bunnings.com.au/practa-37-85-variable-height-fixed-tv-wall-mount-prwmfl_p0649657 Budget INCLUDES buying the bracket and installation. Unfortuantely I am unable to accept any quotes over the budgeted price. Thanks, Felicity

Key details: Built-in bookshelf with multiple bays TV bay width: approx. 1085 mm New TV: Samsung Frame (approx. 1241 mm wide) TV + mount weight: approx. 22 kg Cantilever / extension TV mount already purchased Bookcase backing and side panels are non-structural / hollow Bookcase is fixed in place and cannot be moved Preference is a solution that does not rely on rear wall studs Scope of work: Assess the existing cabinetry on site (photos will be provided) Determine the safest structural method (e.g. internal timber or steel frame) Advise on materials required Install the frame and TV mount so the TV sits flush with the front of the bookcase Final installation of TV (Frame TV replacing an existing older TV) Materials: I will purchase all timber / materials from Bunnings once the method is agreed Requirements: Qualified carpenter or cabinetmaker Own professional tools Experience with TV mounting inside cabinetry Must prioritise structural safety Please include: Your trade background Similar work you’ve done (photos preferred) Any initial thoughts based on this description

We have a smart TV on the wall. The internet is working fine but Live terrestrial TV is not working. We have connected the aerial booster to power and it has worked in the past but is not working now. It appears that one element has stopped working. I need someone with aerial and tv experience and expertise.

- remove prior wall mount - install new wall mount - hang tv - run cords through pre existing wall holes