Hire a professional home theater service in ACT

Hi folks. Due to the nature of the task, I am looking for experienced or professional projector screen assembly. I have an existing wall mounted TV that requires removal along with the wall mount. A PowerPoint which may need to be removed and a wall cavity for cables may need to be removed. The screen is 120" fixed frame which requires assembly and also will require the initial projector aligning/setup to be done. Offering above average incentive for the work. Thanks.

Hi, I would like to install our 65 inch TV on wall mount, already brought the wall mount bra and just need someone to install it. Please suggest if you can do it this week, we’re flexible with day and time! Thanks

We need handyman to install the security cameras- wireless. And Tv mount installation. Thanks

The back plate is already connected to the tv, I just need someone to use a stud finder and put the bracket to the wall.

Just got a 50” inch tv I would like to put on the wall. I have the bracket and all the hardware, just need it drilled in and mounted properly. If you know what you’re doing, I imagine it will be a 30-60min job.

Purchased a 55” Samsung frame tv and a bracket - need help mounting to wall in bedroom

Need to wall mount 75 inch wall mount TV. I have the bracket. Need to be done on 30th Aug after 3pm

tv wall mounting - happy to assist too -samsung 40 in brick (light) -samsung 50 in wall/studs (25kg) I have wall the wall mounts for them. (Had to resigned due to tasker wasn't available until sept 6th.)

I have a new bulb for Epson home theater projector, I need some expert to replace the bulb set.

Wanting someone to make TV antenna work; pick up TV stations

Need services for mounting a 120 inch projector screen on a wall.

Looking for someone to install TV mount, mount TV onto the wall and place cables through the wall to the power. This is a Samsung Frame TV

Mount tv on wall in apartment

Wall Mount 65” Hisense TV (Bracket Provided) Looking for someone to wall mount a 65” Hisense TV (Model: 65P6) using the EZYmount VP-T155 tilting wall bracket (already purchased – see photos). Details: - Wall type: Plasterboard (gyprock) on timber frame - Stud finder will be required to locate studs - You must bring your own tools, including a drill and spirit level - Need to ensure access to power points below after mounting - Preferred mounting height is roughly aligned with just above power outlets on the wall (see photo) Timing Preference: Ideally would like this done today between 12pm–4pm Location: Chifley, ACT (full address will be proivded upon awarding job)

I have a Sonos system 6 x 100s and 2 x ray sound bar. Having issues getting it all synced. Looking for an expert in the audio visual field with knowledge of Sonos systems

Air tasker to supply their own ladder and barge cappings and potential backup supplies for repair and potential maintenance work on my 3 bedroom one storey villa in Holt including: 1. Most urgent and essential : remove foxtel antenna and replace with like for like monier rooftiles that I have a few of but may need to supply if not able to use the ones I have. I also have silicone and flashing for you to use. 2. After completing step 1, wipe clean all 3 skylight tops on the roof, and if necessary, also inspect roof and gutter to maintain, i.e., remove branches and leaves if required. 3. After step 2 inspect roof, flashing and gutters for cracks and gaps, and only if applicable, replace any cracked tiles with my like for like rooftiles where and if necessary use my additional flashing/silicone to help me keep to budget. 4. If easy to source please supply amd insert additional three (3) barge cappings on 3 barge edges not already inserted (as some have already been placed on some of my barge edges) to be added on other edges not already inserted. To be completed asap as there's been rain ingress where antenna is. My work from home days are Tuesday and Thursdays. See my photos, for example.

I’m moving out of my rental and need to put the tv mount back up on the wall. I need someone to provide the appropriate wall mounting fittings for a heavy unit on a plasterboard wall. Edit to add: 1. I have the mount already just not sure if the fastenings are appropriate and 2. I do not need a tv attached, just the original mount to go up

I need someone to mount my TV to the wall and install two brush plates in the wall to allow for cable concealment from the tv to the bottom of the wall. I have the tv bracket and also the two brush plates for the wall. Need someone who has the tools and expertise to install them.

I need my projector screen installed and mounted into the dry wall in my loungeroom, the screws need to be fixed into the studs/wooden frame beams so its sturdy. Projector is retractable, 220cm in length metal tube. Specific screws are needed to be long and thick enough to reach the studs and support the weight but also need to have small enough heads to fit through the holes in the projector mount. (No idea what im saying but explaining the best I can) Ive looked for the screws to do it myself for months and cant find the type I need.

I would like someone to mount my tv onto my wall. 📺Tv size:50” 🗜️Mount: supplied ✅ tilt tv wall mount 32”-80”, 600mm x 400mm. 45kg rated. Screws for attaching mount to tv back included. 🧱Wall: plasterboard 🧰Tools: supplied ✅ you are welcome to bring and use your own, but if you need to you can use my DRILL , STUDFINDER, LEVELLER and drill BITS if you need to. 🔩Screws: Please supply the required screws/plugs. ❗️ 📏 ideal mounting height: 76cm from the floor Other information: ❓I have tried using magnets and a studfinder to find some studs but cannot seem to drill into a wooden batten. It is possible that they are thin metal ones which are apparently common with new apartment builds, but I am not an expert. I would like someone who has experience with these kind of walls/set ups, and can mount the tv securely. ⚠️I want to avoid only mounting into the plaster as the tv will sit on the same wall as the front door, so impact/vibrations from that opening and closing is a factor I want to consider. ⏱️ preferred time: as this is located in an apartment complex I will avoid drilling outside 7am and 7pm out of consideration for my neighbours. I look forward to viewing your offers. Thank you 🙂 ➕ I am also seeking someone to drill a 2 bike hooks into a concrete wall, if this is someone you can also do then flick me a message and we can work out a package deal. (As this is concrete you will need to bring your own hammer drill and tools)