Book a reliable car head unit installation service in VIC

Hi there, I was wondering if anyone is available today with the skill and experience to install a new Sony Head Unit into my 2011 Nissan Navara Single Cab D22 Ute? Located in Glenroy, undercover working area ect. Thanks

I have an aftermarket ford ranger head unit I need installed.

Looking for an experienced car audio installer to replace the factory stereo in my 2016 Hyundai Accent (manual sedan). Job includes: - Remove factory head unit - Install new double DIN head unit - Proper wiring (no cutting corners) - Ensure CarPlay/Bluetooth/audio all working - Clean, flush finish (no gaps or loose trim) I’m considering something like a Sony XAV-AX1000 but I’m open to recommendations on units (max retail ~$300). Happy to either supply parts (head unit, fascia, wiring harness, etc.) or have you supply if you can advise what’s needed. Looking to get everything done in one visit with a professional result. Please only apply if you have experience with car audio installs. If working after 4pm, location would be Geelong zwest. If before 4pm, Charlemont. FYI

Looking to install the below unit. The car model is 2010 Subaru forester https://www.ebay.com.au/itm/376308094390?chn=ps&_ul=AU&_trkparms=ispr%3D1&amdata=enc%3A1UZQ4lUPbT8euHUvknI9XaQ36&norover=1&mkevt=1&mkrid=705-173151-935305-0&mkcid=2&mkscid=101&itemid=376308094390&targetid=2370046502538&device=m&mktype=pla_with_promotion&googleloc=9112820&poi=&campaignid=21766134162&mkgroupid=175112620264&rlsatarget=pla-2370046502538&abcId=10047381&merchantid=5375545398&gad_source=1&gad_campaignid=21766134162&gbraid=0AAAAAD97CxREMH8f8m9h0SlD7JY55DuMN&gclid=CjwKCAjwtIfPBhAzEiwAv9RTJoDGUgd4ixYz8syLc8k5QsgYpC1xRBVsR2g01ndOs6rEaXHKuS4wBRoCCHMQAvD_BwE

Connect a new head unit(radio etc) into a kid sportage. Connection harness provided.

Installation Head unit for Toyota Corrolla hatch 2017

Have purchased a 2011 kluger grande - have ordered a headunit, reverse cam etc - need someone to install tonight if possible https://www.cjindustriesaustralia.com/products/toyota-kluger-2008-2014-plug-play-head-unit-upgrade-kit-car-radio-with-wireless-wired-apple-carplay-android-auto?_pos=2&_sid=50d8f63a2&_ss=r

Hi I have a head unit that needs to be installed on a 1970s Mercedes, I have already removed the old head unit.

Installation of: apple car play head unit parking camera Dash camera

Ive had enough. Ive done that much shit and still can’t figure it out. Im so close yet so far so now I just want someone to come do it. Got all the harnesses (I assume) so just bring your brains, unless you can spot what’s wrong in the photos and be genuine enough to tell me whats wrong. NOTE: This is a chinese aftermarket unit & you will not be fully paid if you cannot figure it out

Need someone with knowledge/experience to install a new apple carplay head unit and reverse camera into my 2011 nissan navara d40. Unfortunately don’t have the time at the moment to do it myself due to uni so looking for someone who can. Will need to bring their own equipment (multimeter, wire stripper etc, wire connectors). Should be an hour or so job if you know what you’re doing. Headunit to suit car is provided.

Purchased a CARABC Wireless Carplay box For Peugeot 308 (2017) Needs installing. Can confirm car is SMEG system.

Hey, looking for someone who knows how to install car head units. I’ve got an Android head unit with wireless CarPlay/Android Auto for my 2008 Toyota Corolla hatch that needs installing. It also comes with: Reverse camera ADAS dash cam External microphone Everything is already here, just need someone to install it and make sure everything works properly (camera, CarPlay, etc). Prefer someone who has installed these before.

2011 Mazda 3 Neo (BL) – Head Unit, Reverse Camera & Front/Rear Dashcam Install - Non-Bose / non-amplified car model. - Preferred install date: 23 Feb onwards (flexible if needed) Parts Supplied by me: • Pioneer DMH-AP6650BT — Head unit • Aerpro AKMZ4 — Fascia kit • Aerpro APP8PIO9 — Pioneer harness • Pioneer RCAMAVIC — Reverse camera • Viofo A229 Plus — Front & rear dashcam • Viofo HK4 (USB-C) — Hardwire kit SCOPE: Head Unit: • Install using supplied fascia & harness • Retain steering wheel controls • Route USB into centre console (secured, not loose) • Mount microphone near rear-view mirror or high on A-pillar Reverse Camera: • Mount centred above number plate • Wire reverse trigger correctly (auto-switch in reverse) Dashcams: • Front camera high centre behind rear-view mirror • Rear camera high centre on rear glass • Hardwire using supplied HK4 via fuse tap (ignition/ACC preferred) • Concealed wiring, no loose trim Clean, factory-style install with everything functioning correctly. Please confirm any: • Experience with Mazda 3 BL installs • Workmanship warranty (if offered) • Availability from 23 Feb onwards Budget set, open to discussion based on experience and quality

Hi I am in Mount Waverley with a Toyota kluger Grande 2014. I have done lots of research and got a head unit, etc. To be installed, list is: 1) install new head unit, it’s built for my car model, with all the required cables 2) install dash cam 3) run media player (in the roof for kids) aux out to head unit 4) install new 4 channel amp 5) run the 4 channel outputs, subwoofer and coaxial out from head unit to the amp, in the boot. Rewire/ run the speaker cables accordingly. The extra cables is for a dsp at a later date. Please supply the cables, something nice. 6) install new focal flax evo speakers for the front (to be purchased) 7) dampen all four doors A quote and some advice will be awesome.

Install head unit and rewire to factory settings

I’m looking to install an aftermarket head unit in my Nissan Micra 2011 Ti Automatic, along with reverse and front cameras. I have already purchased the Mekede Dudu7 head unit, as well as the cameras, fascia/frame, and all required wiring for installation. According to the manufacturer’s technical support, everything needed for the installation has been provided. However, I’m happy to consult and discuss further if any additional parts or requirements are identified during the process.

NEED A QUOTE FOR INSTALLATION PLEASE..for putting in a headunit (reversing camera), 4 speakers for both front and back doors, and a subwoofer and amp for TOYOTA KLUGER 2009.

I’m looking for an experienced auto electrician or car audio installer to install a Kenwood head unit into my 2015 Toyota Axio Hybrid. Scope of work: • Install Kenwood head unit (proper fit & wiring) • Install and wire a reverse camera • Ensure steering wheel controls (if applicable) work correctly • Clean, professional installation (no loose wiring) Requirements: • Proven experience with car audio installations • Must be able to show photos or proof of previous work • Familiar with Toyota hybrid vehicles preferred • Bring your own tools Please include: • Your experience • Photos or examples of similar installs • Estimated time to complete the job Location: [Reservoir] Looking for a reliable and professional installer. Thanks!

Head unit and reversing camera installation