Find an experienced driveway repair contractor in Sydney Northern Beaches

Provide a complete aesthetic makeover for an old, filled, and uneven concrete driveway using a high-performance paving paint system. The goal is a clean, uniform, and appealing surface that is durable enough for vehicle traffic. Driveway Size: 76 sqm Current Condition: Driveway has aged and has noticeable uneven areas. All major cracks have been filled. Scope of Work (Worker to Provide All Materials & Equipment) The successful Tasker must be experienced in concrete floor coatings and is required to supply all necessary materials (paints, primers, cleaners, etc.), specialised equipment (pressure washer, floor buffers, rollers), and clean-up. 1. Intensive Preparation Deep Cleaning: Thorough pressure wash, degreasing, and cleaning of the entire concrete surface to remove all dirt, oil, and contaminants. Etching: Supply and apply a specialised concrete etcher to open the concrete pores, ensuring proper adhesion of the primer/paint to both the old concrete and the filled crack areas. 2. Coating Application Primer: Apply a concrete primer/sealer specifically compatible with the top coat and the crack filler material to maximise adhesion and achieve a uniform base. Paint System: Apply two full coats of a high-performance driveway coating. This must be a product rated for vehicle traffic and hot tyre pick-up resistance, such as a 1-Part Epoxy Floor Paint or a Heavy-Duty Paving Acrylic-Latex. Colour: Monument Please specify the brand and type of final paving paint.

Road to driveway needs fixing so car doesn’t scrape underneath. Also would like to get rest of driveway pebblecreted

My driveway needs repair, some of the driveway has been ripped up. We will renovate in 18 so looking at an affordable fix to last that long before the bigger Reno.

My driveway has some broken and cracked parts that need urgent repairing. Ideally this weekend. Approximately 3 rectangles of 1.5m x 1m.

The grating for the gutter at the bottom of the driveway is broken and incomplete at several spots and needs to be replaced. The drainage is also blocked and needs to be cleared as much as possible.

To be done in good weather window, 3 days minimum. Entire surface cleared and brushed clean, any oil spots removed. Deeper pittings to be levelled. Two coats of sealant then to be applied to entire surface. Important that the job is taken to completion without interruption (overnight excepted), once started. All materials and tools supplied.

Driveway repair, as you can see from the picture . Thanks

Repair driveway some has been removed and some is filled with an epoxy resin.

Job Description: I need help preparing and repainting a concrete driveway (approx. 40 square metres). I've already tried power washing the old paint, but not all of it has come off — so the remaining paint needs to be properly removed before the new paint is applied. What I need done: Thorough surface preparation: remove remaining old paint (grinding or another effective method — not just power washing) Clean and dry the area ready for painting Repaint the entire driveway evenly using paint provided Details: I will supply 5 litres of concrete paint (please let me know if you think this is sufficient) Parking is available on the street Flexible with timing, but sooner is better Ideal Tasker: Experienced with concrete painting and surface prep Has all necessary tools for paint removal and application Can give advice if additional paint or sealer is needed

Looking for a professional painter to clean, repair small cracks, and paint my driveway in light grey acrylic paint with non-slip properties. Driveway Size: Approximately 76 square meters (sqm) Detailed Requirements: * Cleaning: Thorough high-pressure cleaning of the entire driveway to remove all dirt, grime, oil stains, and loose debris. A degreaser/cleaner should be used. * Crack Repair: Small, hairline cracks will need to be filled and repaired with appropriate, flexible, exterior-grade crack filler. * Priming: Application of a suitable concrete primer/sealer for optimal adhesion and durability. * Painting: Two (2) coats of high-quality, durable, light grey acrylic driveway paint. The paint MUST have non-slip properties (either pre-mixed or with a non-slip additive). * Preparation: Proper masking and protection of surrounding areas . * Cleanup: Removal of all project-related waste and leaving the site tidy. Important Notes: * Experience Required: Please only respond if you have experience with concrete driveway painting and can demonstrate previous similar work (photos preferred). * Quote Breakdown: Your quote must include: * Material Costs (paint, primer, crack filler, cleaner, consumables) * Labour Costs I am available for a site visit to allow for an accurate assessment and quote. Please specify if your quote is based on the provided information or if a site visit is essential for a firm quote. Thanks

There are around 5 of these light bollards that are knocked down on the driveway that need to be fixed. 2 is broken and needs to be replaced.

600mm X 600mm hole cut by Sydney water in concrete driveway. Dig out tar and replace with concrete plus gravel.

Need someone who can supply material and build a driveway of approx 13m x 5m which includes both sides of retaining wall.

1.8m high fence like the photo example with gate across driveway to separate backyard from driveway. Approx. 4.5m wide.

Seeking an authorised contractor with Northern Beaches council to complete driveway crossing in line with conditions of Authorisation from Council. Remove 5m gutter, remove 5m wide existing layback and crossing slab. Construct kerb, gutter, 4.2m wide layback including 2 x 600mm wings, crossing slab 6m long x 3m wide at layback x 3 wide at boundary. Works must be completed by a northern beaches council authorised and accredited concrete contractor.

Driveway drainage in need of fixing up. I have dug up and found a French drain and suspect it’s no longer connected to the outlet at the end of the driveway causing some serious stagnant water

Brick Driveway is 2 cars wide. Approx 8m x 3m Brick Path is approx 20m x 1.5m

The driveway has brick pavers which would need to be pulled up, the area levelled and then concrete driveway

Approximately 3m wide hinged metal driveway gate and a smaller regular gate as pictured. Similar design to what used to be there as pictured.

Remove any debris/materials blocking flow of water in the drain at the bottom of my driveway as it is pooling water.