Find an experienced local draftsman in VIC

Looking at doing house renovation, new laundry,kitchen, powder room and second bathroom. Plus redesigning living room etc

I need an experienced draftsperson or building designer to prepare structural and architectural plans for a residential side-of-house verandah conversion in Clyde North, ready for a building permit application. Project Scope & Details: Current Setup: I have an existing open timber framework structure attached to the rear of the brick house, running alongside a side boundary fence (as shown in photos). The Goal: I want to enclose/roof this structure to turn it into a compliant covered verandah. Key Requirement (Planning/Fire Safety): Based on early discussions with building control, the posts/piers will be positioned approximately 600 mm away from the boundary fence, and the final roof design needs to adhere to local boundary setbacks and window fire-separation regulations. Project Scope & Details: Current Setup: An existing open timber framework structure located on the side of the brick house, running alongside the side boundary fence. The Goal: Converting it into a fully covered verandah with solid polycarbonate roof sheeting across the entire structure. Key Design Detail: We are adjusting the layout and pier positions to ensure the structure meets boundary setback and fire requirements, allowing a 100% solid polycarbonate roof across the whole space without needing house window upgrades. New footings/piers will be adapted to existing holes cut through the concrete slab. What I Need From You: 1. Draft structural and architectural plans suitable for a building permit application showing the full polycarbonate roof covering on the side of the house. 2. Include or coordinate the required footing and structural engineering details. 3. Deliver a complete, compliant documentation package ready to hand over to a building surveyor.

Need someone to help me to redraw the coffee cart layouts and format them correctly for the council food registration application

Need to apply permit to turn my garage into a beauty Salon, also need a drafter to draw a floor plan

Looking for an experienced Victorian draftsman or building designer to come on-site to our home in Narre Warren South (3805) to measure and draw up plans for an internal house conversion. We are separating our existing home into two self-contained living areas utilizing the Victorian Small Second Dwellings rules. The goal is to design a layout that strictly complies with these rules so we can go straight to a private building surveyor for a building permit. Scope of Work Required: On-Site Measurement: Visit our property in Narre Warren South to complete a precise laser measure of the existing layout. Compliant Layout: Draft the internal division ensuring the secondary area stays under the strict 60sqm gross floor area cap. Amenities: Show all mandatory self-contained facilities (kitchen sink/food prep, toilet, bath/shower, laundry taps). Site & Access Plan: Detail an independent pedestrian path from the front street to the second dwelling's entrance, and note the all-electric layout (no gas). NCC Compliance: Detail and label the required internal fire-separation wall (NCC compliant) between the two zones. Final Deliverables: Provide a full digital plan set (Existing Floor Plan, Proposed Floor Plan, Site/Access Plan, and Basic Elevations) ready for a Private Building Surveyor. Requirements: Must travel to Narre Warren South for the on-site measure. Qualified draftsman/designer who thoroughly understands Victorian building regulations and recent Small Second Dwellings clauses. Experience specifying fire-rated walls for attached dwellings is highly preferred. Budget is indicative for the full scope. Professionals, please make an offer with your actual fixed price if it differs. Please include your estimated turnaround time and any examples of previous internal alterations or secondary dwelling floor plans you have drafted when making an offer. Thanks!

Here’s Option 1 on its own, clean and ready for Airtasker: --- Task: Architectural drawings for new terrace Location: Apartment 2, 484 Nepean Hwy, Chelsea VIC I’m looking for a qualified architect or draftsperson to produce architectural drawings for a proposed terrace at the above address.Scope includes:• Site visit (if required) • Concept design • Detailed architectural drawings suitable for builder quoting • Drawings aligned with council and building requirements Please provide examples of similar work and your estimated timeframe. Happy to discuss details on-site.

Basic 2D Office Floor Plan / Approx 250sqr meters in total. Approx 10 small offices and 1 open plan area

Need a draftsman that has drawn commercial cafe/restaurant, will need to co design with my self on materials and ideals. Needs to be experienced. Thanks

Draftsman service with accreditation numbers for existing Cafe/Restaurant located at Ararat, to redraw the plan for kitchen and seating area, and then lodge with council.

draw up a basic site layout plan with boundary setbacks (Regulation 79)

I need an experienced architectural drafter / CAD technician to measure up and prepare a scaled floor plan and site plan of an existing single-level commercial premises at 30 Burgess Street, Brooklyn VIC 3012 (Lot 2 on PS333131, approx. 930 m²). The drawings are for a planning permit application to Hobsons Bay City Council (car rental use). Deliverables: scaled measured floor plan (1:100, PDF) with internal dimensions and room labels; and a site plan (1:100 or 1:200) showing the building footprint, site boundary (frontage approx. 18.50 m to Burgess Street, depth approx. 50.27 m), fleet/customer/staff parking with the number and dimensions of spaces, the crossover to Burgess Street, the registered easements (3 m drainage & sewerage easements in favour of Melbourne Water) plotted from Plan PS333131, plus north point and scale. The floor plan should show: office/reception and staff work areas; vehicle cleaning area (steam cleaning), chemical store and equipment area; vehicle collection and return areas; toilets, pantry, meeting room, dining room; and all doors including exit doors. Single-level, simple layout. On-site measure required — I have keys and can provide access. I can supply the title and Plan of Subdivision. Time-sensitive. Please provide a fixed-fee quote and your earliest availability.

Scope of Works The project scope is to build a new timber wall 7m long with 1m return to the house. Small infill floor & roof to suit. See marked up area in blue in attachment Structural modifications to support existing & new roof Requirements You MUST be a Building Designer or Architect licensed to prepare drawings for issue of a building permit in Victoria You must be local to Melbourne and include a site meeting to inspect, measure and to advise on non-compliance with the regs being the length of building on the boundary Deliverables Site plan, elevations, floor plan, roof plan, RCP, sections, lighting & electrical plan Shadow plans (4 No. total) for both existing and proposed conditions at both the winter solstice & spring equinox Issue IFC drawings on close out of RBS checklist Recommend a local engineer for structural design and RBS for building permit Prepare a letter justifying the design and how it satisfies the MG-12 Minister's Decision Guidelines for Report & Consent Notes Go straight to Design Development stage ready for RBS review - no schematic drawings for planning permit needed You can use my existing architectural CADS or create your own from scratch My existing drawings show the neighbouring building and windows I have the original features and level survey also showing the neighbouring building and windows Drawings to be marked up, notated and coloured to show the area of non-compliance with the regs. Nominate number of revisions included in your quote

Design a single car garage with a hoist. Turning existing brick car port into a single car garage

Opening a takeaway shop kebab shop I need a draftsman to help with the floor plan to submit for council approval

. Design documentation • Full detailed drawings and a site plan for a chainmesh fence on Crown Land (DTP) are required, clearly showing: o Fence and gate alignment o Relationship to the sound wall o Boundary alignment between freehold and road reserve areas o The design submission must confirm that no structures will be fixed or attached to the sound wall. • These are to be submitted for Consents review prior to approval of any works.

We need a Victorian/Melbourne-based draftsman or building designer for a single-storey renovation/extension project in Carnegie, Glen Eira. The main project is a rear extension replacing/converting the existing timber deck into a fully enclosed living/dining room, plus internal reconfiguration of some rooms and non-load-bearing walls, subject to review. We need someone who can provide a full design and documentation service, not just basic drawings. Scope must include, at minimum: • On-site measure of the existing dwelling and site conditions • Face-to-face site meeting to understand the existing structure and project brief • Existing conditions drawings in CAD • Concept design options for the extension/internal layout • Concept revisions and design refinement • Floor plans, site plans, elevations, demolition plan and working drawings • Basic 3D concept views if available • DBYD/underground services check • Assistance with Special Building Overlay/flood-related requirements • Melbourne Water and Council/VicSmart application drawings/documentation as required • Existing floor level to AHD, or coordination with licensed surveyor • Building permit documentation • Liaison/coordination with structural engineer, energy rater and building surveyor as required • Updates to drawings for reasonable RFIs during permit process • Clear staged fee proposal showing inclusions, exclusions and likely third-party costs We understand a Town Planning Permit may not be required, but the property is affected by a Special Building Overlay, so Melbourne Water/Council approval is expected before the Building Permit. Please only respond if you are local enough to attend site in Carnegie once or twice. In your offer, please provide relevant experience, registration/qualifications, examples of similar extension work, what is included/excluded, expected timeframe, and a staged price breakdown.

Verandah for rear of property 9mx3m

I need a floor plan drawn up for a mechanical workshop in Brunswick

Hello looking for someone who knows how to do elevations and a site plan for my deck and pergola. The architectural plan should include site plans and analysis and this should cover the existing building area, newly constructed verandah area, total building area and total lot area. Site plans should also include sides and rear setbacks. Elevation plans should detail deck and verandah including heights as well as step dimensions. Thanks

We are wanting to build a front fence for a residential property and need a draftsman to draw up plans which will be submitted to Casey Council for a permit. Must be able to cover all the below : A set of properly prepared plans that demonstrate the proposal in terms of appearance and construction including full dimensions drawn to scale, plan and side elevation view, and location of adjoining properties, including front and side setbacks, window locations and other important information.