Find a local welder in NSW

Looking for a skilled and experienced automotive welder to install an aftermarket sports muffler onto an existing exhaust system. This is not a beginner job — only apply if you have proven experience with automotive exhaust work and can deliver clean, durable welds. Job details: Weld on a 2.25-inch inlet sports muffler to existing exhaust piping Ensure proper alignment and fitment with exhaust hangers Minor fabrication may be required to achieve correct positioning and clearance Must ensure no leaks, rattles, or poor joins Requirements: Must have your own tools and equipment (including jack/lift if needed) Experience specifically with automotive exhaust welding Ability to complete the job to a professional standard Price is negotiable

The starter motor from my Nissan Navara YD25 is disassembled and I have new brushes and brush holder and need two brushes spot welded to the stator. The old brushes are still in place and will need to be removed. I will reassemble and test.

Need help fixing misaligned exhaust on Audi A5 (DIY install gone slightly off) I’ve installed a custom exhaust but the rear hanger doesn’t line up properly with the mounting point, causing the exhaust to sit off-centre and tilt to the right. As a result, the exhaust tip is touching/melting the rear valence. Looking for someone experienced with exhaust work to: • Realign the exhaust so it sits centred in the rear bumper cutout • Adjust or modify the hanger (bend or reposition as needed) • Ensure proper clearance from the bumper (no contact) • Secure everything properly so it doesn’t move or rattle No welding required if possible, but open to it if needed for a proper fix. Car: Audi A5 3.0 TDI

I need a water tank mounted onto the truck , photos of location required and water tank is attached. the mud guard bracket will need to be bent square and re welded

Wanting to fit a valve in the midpipe of my exhaust, then a boom tube connected to the valve. I can do the wiring myself for the valve, I just need someone to weld it or source one I can clip on. For a bmw f30 N20

Front steel bar just need welding.

I need a bullbar welded on a Kia pregio van the bullbar is of a Toyota Hilux brackets are there . And also a light duty bullbar just to tow a box trailer brackets are there

needing a sump welded to stop an oil leak and for the car to pass a pink slip

Must have welder, grinder and supply exhaust pipe to replace boxes. I have ramps, jack, tools and the intake system kit. I want the car to sound grumpy so not looking for something legal.

Install high-flow catalytic converter and replace resonator with pipe. Catalytic converter provided. Vehicle 2013 FG ford Falcon

Need someone experienced to build me a tray that will fit my 2021 ford ranger. Thank you

Remove old winch and weld new electric winch on car trailer

I need a very small weld /tack done on my old cars battery tray. The car is currently unregistered and is going to Perth on transport soon . I will remove the battery at the time . Thanks

Hey All, can anyone help tow are weld up our trailer? It's about 55mins from coffs harbour, just broke down tonight. Looks like the frame has snapped under load, We’re trying to see if anyone local knows a mobile welder or mechanic who could help — even if it’s first thing Monday, we just need to line someone up ASAP. It looks weldable (we’ve checked both sides), pics attached. Any leads or contacts would be massively appreciated. Cash job, we just need it sorted. Cheers in advance 🙏

Oil pan is leaking. I can't afford to replace it. Need help if someone can use JB Weld or similar to stop the leak Car: Mazda 3 (2005)

I need a car engine bay shaved, need a welder to come and patch bolt holes in engine bay. Maybe 20-30 holes

I need somebody to weld the left mirror side of my Ford Econovan 2005.

Holden Cruze Oil Pan drain threads are broken. Needs to be welded and new threads to be made.

I need the jump rings on some body chains welded/soldered shut. I will provide the jump rings/chains etc (gold plated) and do the basic construction, I just need someone with experience in jewellery making to weld the rings shut. I have about 5 body chain designs.

Weld / repair the hairline crack in the tyre rack on the back of my old land cruiser.