Find an experienced cabinet maker in Hawthorn VIC

I am looking for a handman to help prepare space for a dishwasher underneath the kitchen benchtop in the photo attached. No plumbing or electrical required. Considering installing the dishwasher on the left hand side of the photo (or advice generally where the most suitable place to install).

Need to fit standard dishwasher in the spot , need to fit in this space if needed to be cut

Looking for a cabinet maker to help me prepare kitchen cabinet for integrated dishwasher drawer install. As a part of this, the hole will need to be slightly altered (2cm too small so the sides will need to be cut into), a bottom drawer will need to be made with the strength to have the dish drawer on top, and a front panel will need to be made to match my kitchen cabinetry.

Put cupboard in the practice, new Bench top in Reception area, Shelving around the practice.

Seeking experienced cabinet maker to fix poor design of existing kitchen cabinets housing two built in refrigerators. Existing refrigerators need to be temporarily removed and an air vent/space installed (with fans?) to rear of cabinet to facilitate air flow and exhaust of hot air at rear of refrigerator into ceiling above. Also, door hinges need replacing as they are sagging and allowing doors to rub together. Price negotiable depending on solution.

Assistance from an experienced joiner/cabinet maker to assemble/place and adjust prefab'd kitchen joinery. Initially one day on site with the possibility of several more depending on outcome and availability - Due date: Needs to be done on Wednesday, 1 June 2022

Need to adjust current kitchen cabinet to accomodate new slim line exhaust (so flush at the front and above). Width OK - see pics. Will need to remove exhaust then re-install (no wiring required just needs to be re-attached).

Please provide a quotation for the following: 1. Supply new doors and panels to existing kitchen space. Please note that all the dimensions are approximate. The existing benchtop is 2.66m x 600mm. Existing upper cupboards 800mm x 660mm Existing lower cupboards 670mm x 600mm 2. Supply and install kitchen island cabinetry. Approximate dimensions: 1.8 x 900mm including overhang and drawers (I have limited space). I have already purchased a new sink and I will keep all of the existing appliances as per the attached photo. I will be sourcing a caesar stone benchtop for the existing benchtops and the new island. Attached is a photo of my current kitchen. * Shaker style doors and panels * 2pac paint finish * Soft close door and drawers where applicable Thanks for your assistance and I look forward to receiving your quotation. - Due date: Flexible