Find a professional brick paving contractor in Perth

Brick paving. Removed due to cable being run. Needs to be replaced.

The side of our house has brick paving with some already pulled up. Need the remainder pulled up and disposed of. Then need the area cleared and levelled ready for paving. It is roughly 15metres x 800mm. Access at both ends.

Tree roots have raised my brick pavers in the carport and back patio. I need the bricks to be taken out, the roots cut and the bricks to be relaid.

Lift pavers. Cut and remove roots. Level area and re-pave.

Insert a 10 lineal metre header course of recycled bricks to finish off carport brick paving. Requires cement bordering to hold bricks in place. Paving area around fence to be made good.

Brick paving repair around two green retic valve boxes in driveway. Bricks and sand were disturbed during recent repair. Need area levelled, bricks re-laid neatly to match existing pattern, and made drivable for car. Approx 1-2sqm. Valve boxes cover the water mains meter and retic valving/piping. The area under the boxes is congested and care will be needed to ensure neither are damaged and the area is driveable. I have 3sqm of red brick on site and available to use.

repair a brick paved pathway which has become uneven and sunk and also paving in the back area where the bricks have risen.

Drop soil down to allow for brick height, compact and lay 7.5m x approx 1m wide brick path (edge of shed to fence) and 1.5m (right angle bend) behind shed. Will provide road base, paving sand and bags of pave and set. Bricks already on site (within easy reach). Easy access gate rear of property. Paving pattern simple (stretcher/running) bond. Presume you will provide compactor, brick saw and other tools needed.

We recently had a plumber fix a leak which was under our brick paving. They had to dig up four sections of paving, varying in size - three average about the removal of 8 pavers, and one larger one of about 20. We require these sections to be repaired.

Brick paving to be remediated back to level. Total paved area is 32m2 (8x4) although much of the area is already at the correct level. 2 areas sunken due to subsoil subsidence & 1 area raised by tree root.

Tree damage (now removed) caused some of the pavers to cave into the narrow garden bed. The concrete haunching of these areas, and another small section, also needs to be fixed. Will need to supply own concrete, building sand etc, but obviously just reuse the current pavers.

Pull up and re lay brick paving using existing bricks - 16 X 2.2 metres - no urgency

8.8 m2 of brick paving (2200mm x 4000mm) I have the recycled red bricks and probably enough sand. I don’t have cracker dust or white paving sand if you want to use this I would need to to supply cracker dust and white sand. There’s a small section of concrete to cut and remove so the paving is flush with the concrete path. Access is good also

Extend brick paving by two brick rows x around 5.5 m wide. I have extra pavers.

Small area (1.75m by 1m) to replace paving where a tree stump has been removed. Bricks provided with advice. Criss cross pattern (I don't know the technical term obviously). To match the rest of the courtyard

Hi Tradies 😊 please let me know if you can help with this job. I’d like to replace the brich pavers with travertine stone, area is about 20-25square meter and it’s level, but would like to lay cracker dust underneath the stones. I have already have the stones on site.

,leveling ,Brick paving 30 sqm

I’ve removed a brick path, would like it re paved to the left.

Re pay brick paving and form up a garden bed edge