Find trusted car battery replacement experts in VIC

1998 honda prelude car starts, runs for a minute, turns off needs a few turns to crank, sometimes sounds like the starter motor disengages and reengages. sounds like a clunk and grinding headlights turn on by themselves as well as other components behaving strangely after car has been running smoke at one point came from under the dash suspected starter relay new main relay new coil new ignition control module cleaned all ground points new battery, remains inside on charge

Looking for an experienced auto electrician / 12V installer to upgrade my camper trailer setup. Current setup includes Victron MPPT and DC-DC charger already installed, with 2x AGM batteries. Scope: • Remove existing AGM batteries • Install lithium battery (supplied) • Install a battery renogy battery monitor • Check fridge Anderson connection • Confirm system is charging correctly (solar) - maybe add a DC - DC charge mount. Everything is already mounted and accessible — not a full install, just an upgrade. After someone who knows 12V systems well (preferably with Victron experience). Located in west Footscray. Flexible with timing. Please quote your price and include any relevant experience.

Need to replace a battery terminal on Nissan xtrail T32. The positive terminal becomes loose sometimes. Need someone to replace these. I got the parts. Location: Cranbourne East.

I have a 2024 Toyota Camry sedan needs day time running lights turned off

My cd player makes a very loud crackling sound over bumps and eventually sound has cut out completely. I need you to either fix or replace (purchase together) the cd/radio player and connect the 2 front speakers and to it and also replace/purchace 2 rear speakers and connect them. I can come along to any reccomended car radio/speaker stores close to St Kilda to purchase stereo and speakers. Probably only take 1-3 hours max to shop and install I'm guessing.

12v power to my fridge draw in camper trailer isn’t working needs to be fixed, also need my power panel looked at dcdc charger

Swap Cruise Control Module – 2010 Ford Fiesta → 2011 Ford Fiesta Description: Looking for an experienced auto electrician or mechanic to swap a cruise control system from a 2010 Ford Fiesta into a 2011 Ford Fiesta. Both vehicles are available on-site. The job involves removing the cruise control components from the 2010 model and installing them into the 2011 model. Details: Vehicles: 2010 Ford Fiesta (donor) & 2011 Ford Fiesta (target) Task includes: Removing cruise control components Installing into second vehicle Ensuring system is working correctly after install Must have experience with Ford vehicles or similar electrical work

Steering wheel buttons aren’t working with my head unit

My power setup is having some power issues. I need someone to check and then fix

I would like to install 4 Amber lights for Toyota Hiace 2020 van I already purchased the lights

I own a 2015 Ford Mondeo. It was picked up from a panel beater yesterday (Saturday) after front end repairs were done. At the time, the battery was flat. It was jump started. It later died again (after being driven for about 45 minutes). The battery was so flat that the doors would not lock. RACV came out and jump started it. The alternator tested fine. It was then driven for about 1.25 hours. After which, it was put onto a 240V AGM battery charger. After a few hours, the battery charger (used before without issue) started overheating. The battery this morning is dead - it won't even turn over. I believe there may be a short circuit of some description and before I go off guns blazing to the repairer, I need an objective opinion - from an expert). The budget is a placeholder, since I don't know what to expect!

I have a 2008 Toyota Hiace van. I have installed a new head unit in it and new speakers but need someone to install the back up camera, the hands free microphone and to hardwire the dashcam. Simple task for someone who knows what they’re doing. I would like to get this done today or tomorrow as I am on a job in Williamstown all weekend from 7am to 5pm. Otherwise next week during the day would work. PS I have all the hardware.

I need an auto electrician to come to toorak and remove a part from my bus. Its a pretty simple and quick job from what ive been told

Hi, I’m looking for a mobile mechanic or auto electrician to help with my Hino 500 truck. 1. Air conditioning is not working. I was told the issue is related to the A/C belt – the belt came off and is missing (not in place). I already bought the belt. 2. I also need lights replaced – I already bought the replacement kit. Please let me know: • If you can diagnose and fix the A/C belt issue (and re-fit/replace belt if needed) • If you can install the light kit • Your availability and your quote

2005 Ford Transit restoration. I've completed about 90% of the wiring loom rewrap. At 64yo I'm having problems getting under the dash and into the engine bay. The Dash and instrument cluster have been removed to gain access to the loom at the back and under the dash. I need someone who can help finish the rewrap in electrical tape. ie. stronger back than mine. Will require getting under the van for things like horn, loom connectors etc. I estimate about 3hrs to complete. But willing to pay as required. Note: Anyone who is car minded and good with electrical tape should also apply.

Connecting my 12v BCDC Charger to my Alternator in my 2011 Hilux N70

Car battery draining everyday, need an auto electrician to locate and fix issue draining battery

Mobile repair in carport off street.. 1993, mitsubishi L300 wipers intermittently working and drivers window stuck open. Down still works, but up does not.

Nitro Vrx river Hobby N2 remote control car won't start. Anyone with knowledge I would like to pay for your time to bot only get the car going but learn( 1 hour of your time) being that the car is brand new it won't need parts just smarts

Auto electrician needed to wire rear tail lights on 1993 GQ Patrol. Reverse, indicator, brake lights. Old plugs have been cut, either need them hard wired in or new plugs made.