Washing Machine Repair & Installation Jobs in Central Coast

Browse through over 500 Washing Machine Repair & Installation Jobs.

See what you could earn

$0

per month

Based on average washing machine repairs & installation task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Washing Machine Repairs & Installation tasks in Central Coast

Check out what tasks people want done near you right now...

I have a disassembled Calgym lat pulldown machine I need reassembled in my home gym. Must be experienced with cable tightening and bring tools

Caves Beach NSW, Australia

Fri Oct 23 2026

about 8 hours ago

Open

Hydraulic Services Designer – Small Commercial Laundromats Looking for an experienced hydraulic designer/consultant to assist with several small laundromat projects around Sydney, generally 40–60m². I’m a licensed plumber and can provide architectural drawings, machine specifications, preliminary plumbing layouts and proposed service arrangements. Require hydraulic drawings covering hot/cold water, sewer, trade waste, lint arrestors, pumped drainage where applicable, and gas services. Design review and certification where required. Ideally someone experienced with NSW requirements who can provide cost-effective fixed pricing and assist with ongoing projects. Please advise experience, pricing and turnaround.

Thu Oct 22 2026

1 day ago

Open

Looking for an experienced and reliable person to complete an exterior clean and refresh of our property in Horsfield Bay. The job includes the following work. 1. Exterior house wash • Wash/clean the exterior of the house to remove dirt, grime, mould and general build-up. • We are happy for you to recommend the most appropriate method, including soft washing and/or pressure washing depending on the surface. • Important that the existing painted surfaces are not damaged or stripped by excessive pressure. • Please use the appropriate cleaning solution and pressure for each surface. 2. Driveway pressure washing • Pressure wash the driveway and associated hard surfaces. • Remove built-up dirt, mould and staining as far as reasonably possible. 3. Front timber deck • Properly clean and prepare the existing timber deck for staining. • We do not require the entire deck to be mechanically sanded back. • Preparation can include an appropriate Cabot’s deck cleaner/stripper or equivalent where required. • Apply 2 coats of Cabot’s Merbau decking stain/oil. • Application and drying time between coats to follow the product requirements. 4. Car park timber rails • Repair/replace one timber rail that has snapped off. • Prepare the existing timber rails as required. • Sand/grind back rusted bolts and other rusted metal areas before coating. • Apply suitable rust-inhibiting primer to exposed/prepared metal before painting. • Paint all timber rails white with 2 coats. • The existing rails are generally in reasonable condition, so only normal/minimal surface preparation is required apart from the rusted areas and damaged rail. 5. Front stairs and handrails • Prepare and repaint the handrails running down the front stairs. • Prepare and repaint the stair treads. • Preparation needs to be appropriate for the existing surfaces so the new coating adheres properly and gives a durable finish. • Apply the appropriate primer where required and 2 finish coats.

Horsfield Bay NSW 2256, Australia

Thu Oct 22 2026

1 day ago

Open

I’m looking for someone with experience in CO₂ fittings, gas connections or carbonation machines to help me find a safe, compatible solution for using Australian SodaStream CO₂ cylinders with a UK-market Aarke Carbonator Pro. What I need: Determine the exact fittings and adapter required to connect an Australian SodaStream cylinder to my UK Aarke Carbonator Pro. Investigate whether a TR21-4 male to Type 30 (G1/2) female adapter is the correct solution, or whether a different fitting is needed. Confirm the correct thread specifications, seals and materials, and source the appropriate parts from a reliable supplier. Install the adapter if a safe, compatible solution is confirmed, and check for leaks and correct operation. Important: Aarke has advised that Australian and UK cylinders use different connections. I want to establish compatibility before purchasing or installing anything. Please don't assume that a thread adapter alone will work, and don't modify the machine or pressurised components unless the solution is confirmed to be safe. I’m open to sourcing parts from Amazon, AliExpress or specialist suppliers. Please respond if you have relevant experience with CO₂ fittings, pressure systems, SodaStream connections or Aarke machines. Let me know your proposed approach, relevant experience and estimated cost for the research and installation. Can be done at your home if needed. Machine currently located in Bangalow. The goal is a practical, safe solution that allows me to use locally available Australian CO₂ cylinders rather than having to import European cylinders.

Thu Oct 22 2026

1 day ago

Open

Skirting board painted Washing line fixed

Erina NSW 2250, Australia

Tue Oct 20 2026

3 days ago

Open

Sunbeam coffee machine is leaking cold water. The machine is in good order otherwise. The stream wand works well.

Tue Oct 20 2026

3 days ago

Open

Dismantle gym cable machine and deliver it to Cromer and reassemble in Cromer Pickup location: Killcare NSW 2257, Australia Drop-off location: Cromer NSW 2099, Australia Needs 2 people to dismantle Removals size: A few items Stairs: No

Killcare NSW 2257, Australia

Tue Oct 20 2026

3 days ago

Open

I have a Lg washing machine where the lid wont lock in and with the lid not locking it will not go to the next cycle

Buff Point NSW, Australia

Mon Oct 19 2026

4 days ago

Open

i need someone to come to my home gym at macmasters beach and assemble this https://www.ffittech.com.au/products/ffittech-smith-machine-counter-balanced?variant=41606148489405

Macmasters Beach NSW 2251, Australia

Sun Oct 18 2026

5 days ago

Open

Browse all tasks

Last updated on 23rd Oct 2026

Discover your earning potential in Central Coast

Earn money with every washing machine repairs & installation task

$200

per week

1-2 tasks per week

$500

per week

3-5 tasks per week

$700+

per week

5+ tasks per week

$866

per month

1-2 tasks per week

$2,165

per month

3-5 tasks per week

$3,031+

per month

5+ tasks per week

$10,400

per year

1-2 tasks per week

$26,000

per year

3-5 tasks per week

$36,400+

per year

5+ tasks per week

*Based on average washing machine repairs & installation task prices in Central Coast. Actual marketplace earnings may vary

Join Airtasker

Unlock new income opportunities in Central Coast

Explore washing machine repairs & installation related jobs and discover your financial opportunities

Type of washing machine repairs & installation job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Appliances	$300	$750	$1,050
Washing Machine Repairs & Installation	$200	$500	$700
Appliance Installation	$300	$750	$1,050
Appliance Repair	$290	$725	$1,015
Dishwasher Repair	$300	$750	$1,050
Oven Repair	$400	$1,000	$1,400
Cooktop Installation	$380	$950	$1,330
Gas Fitters	$394	$985	$1,379
Stove Installation	$370	$925	$1,295

*Based on average washing machine repairs & installation task prices in Central Coast. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Washing Machine Repairs & Installation Taskers in Central Coast

meet
Kathy V
9 years on Airtasker
- East Sydney NSW
5
Overall rating
1619 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
1841 tasks
meet
Mike B
8 years on Airtasker
- Gosford NSW
5
Overall rating
436 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
498 tasks
meet
John S
3 years on Airtasker
- Galston NSW
4.9
Overall rating
144 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
172 tasks
meet
Moustafa A
1 year on Airtasker
- North Gosford NSW
4.9
Overall rating
81 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
99 tasks
meet
Simon S
1 year on Airtasker
- Bensville NSW
5
Overall rating
155 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
177 tasks
meet
Greg H
1 year on Airtasker
- Mannering Park NSW
5
Overall rating
8 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
14 tasks
meet
Scott allan H
11 months on Airtasker
- Taree NSW
4.8
Overall rating
9 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
12 tasks
meet
Stephen S
11 months on Airtasker
- Wyong NSW
4.9
Overall rating
77 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
103 tasks