Kitchen Cabinet Maker Jobs in Parramatta

Browse through over 500 Kitchen Cabinet Maker Jobs.

See what you could earn

$0

per month

Based on average kitchen cabinet maker task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Kitchen Cabinet Maker tasks in Parramatta

Check out what tasks people want done near you right now...

Repair chipped and peeling laminate on 2–3 kitchen cupboard doors, patch damaged edges and corners, and touch up the finish. Budget under $100.

Oatlands NSW 2117, Australia

Sat Oct 10 2026

about 14 hours ago

Open

Custom walnut-finish drinks cabinet Looking for someone to build a drinks cabinet similar to the attached image. Size: 1,000 W × 450 D × 900 H mm, including legs. Dark walnut finish, fluted doors, brass-tone handles, and an open centre with a hanging wine-glass rack and bottle storage. Quality engineered board is fine; solid timber isn’t required. Shipping to Pakenham, VIC. Please quote materials and labour, estimated timeframe, and any delivery costs. Potential for repeat orders if the quality and pricing work wel

Fri Oct 09 2026

about 16 hours ago

Open

We have 2 tables and 2 wall hung vanity cupboards we would like remade into wood or wood veneer. The tables will have a stone top (25mm overhang at the front and 6mm overhang either side stone snd basin already purchased). The wall hung vanities sit approximately 150mm below the table. The table legs are slightly concave at the top and taper to the floor. Dimensions Tables 1 x L1800 x w 550 x h 780 - 2 holes needed 1 x L 1400 x w 500 x h 780 - 1 hole needed Vanity cupboards 1 x L1400 x w 420 x h 300 - 2 electrical connections either end and holes for plumbing 1 x L110 x w 420 x 300 1 electrical connection on left hand side and hole for plumbing. We would like quotes. We have originals for inspection if needed. Questions welcome. Dimensions available.

Fri Oct 09 2026

1 day ago

Open

We're a cabinetry installation business based on the Gold Coast. We're looking to connect with experienced cabinetmakers and cabinetry installers interested in regular ongoing subcontract work. We have a variety of projects including kitchens, laundries, wardrobes, vanities and custom cabinetry installations. **This $10 task is for a brief introductory phone discussion** to chat about your experience, availability, rates and potential opportunities to work together. We're hoping to build relationships with reliable, experienced installers who take pride in their workmanship. If you're interested, please make an offer and briefly let us know about your installation experience. Looking forward to chatting!

Fri Oct 09 2026

1 day ago

Open

Kitchen cabinets bench top

Westmead NSW 2145, Australia

Thu Oct 08 2026

2 days ago

Open

Supply Only – Custom Kitchenette and Staff Locker Cabinets I’m looking for a cabinetmaker to supply cabinets matching the attached photos. I will pick them up from your shop and arrange installation myself. Kitchenette: • Overall width: 1100mm. • Base cabinet and benchtop depth: 450mm. • Two-door wall-mounted cabinet: 1100mm wide × 300mm deep. • Base unit with an open microwave recess and two drawers underneath on the left, plus three drawers on the right. • Include benchtop, kickboard, handles and hinges. • Cabinet heights and microwave opening dimensions to be confirmed before manufacture. Staff storage cabinet: • Overall dimensions: 1100mm wide × 2200mm high × 450mm deep. • Six separate lockable compartments above, arranged in two rows of three, each with its own door, lock and keys. • Two-door cupboard below with handles, no locks. • Include kickboard and all hardware. White finish as shown in the photos. Please quote for supply only, including materials and Airtasker fees, and advise your shop location and estimated completion time.

Dundas Valley NSW, Australia

Wed Oct 07 2026

3 days ago

Open

(I can pickup in Sydney) I’m looking for someone to supply and cut white melamine shelf boards/panels for use as extra shelving inside my cabinets. I need 4 panels cut accurately to the following sizes: * Panel 1: 56.5 cm × 26.5 cm * Panel 2: 63.5 cm × 49 cm * Panel 3: 63.5 cm × 49 cm * Panel 4: 40 cm × 35.02 cm I would prefer standard white cabinet/shelving board, with clean and smooth cut edges. Please let me know if you can supply the board and cut it to these exact measurements. I only need the panels prepared to size, ready for me to use inside the cabinets. Thank you.

Mays Hill NSW 2145, Australia

Wed Oct 07 2026

3 days ago

Open

Hi, I need an experienced cabinet maker or joiner with a professional workshop setup to fabricate 5 cabinet doors and 1 side panel. This job must be completed off-site at your workshop and delivered back finished. The Design Setup (High Attention to Detail Needed): • Face & Reverse: The front laminate sheet and the back laminate sheet are different colours. • Edges: Each of the four edges on the doors/panel will feature a different colour ABS edging (e.g., matching the face, reverse, or specific accent borders). Precise attention to detail is required to ensure the correct edging goes on the correct side. What needs to be done: 1. Supply Substrate: You must supply the 16mm Moisture Resistant (MR) MDF core sheets. 2. Pick Up Materials: Collect the raw materials from my location in Seaford Vic 3. Laminate Pressing: Glue and press the laminates flat onto both sides of the 16mm MR MDF core using proper workshop pressing equipment (no air bubbles or telegraphing). 4. Precision Cutting: Cut the sheets cleanly down to the final sizes without chipping the laminate. 5. Multi-Colour Edge Banding: Apply the specific ABS edging variations to each designated border and trim flush. 6. Delivery: Drop off the 6 completed, finished pieces to my address. Approximate dimensions of finished pieces: • 5 x Doors: Roughly 60cm x 80cm each • 1 x Side Panel: Roughly 60cm x 80cm What I will provide: • 2 x Large sheets of laminate (1.8m x 3.6m each — two different colours) • All required rolls of ABS edging (in the different colours needed) What you must have/supply: • Supply of the required 16mm MR MDF sheets. • Commercial workshop setup (cold/hot press, precision panel saw, and edge-bander/trimmer). • Transport to pick up the 1.8m x 3.6m sheets and deliver the finished doors safely. Please outline your experience with custom laminate work and your estimated turnaround time in your offer. Thank you!

Sun Oct 04 2026

6 days ago

Open

Looking for professional kitchen cabinet maker to come and align the kitchen cabinet doors. And put the kickboard under dishwasher. I will provide with the kick board but need to cut and some more kick board need to been set correctly.

Wentworthville NSW 2145, Australia

Wed Sep 30 2026

10 days ago

Open

Browse all tasks

Last updated on 10th Oct 2026

Discover your earning potential in Parramatta

Earn money with every kitchen cabinet maker task

$432

per week

1-2 tasks per week

$1,080

per week

3-5 tasks per week

$1,512+

per week

5+ tasks per week

$1,871

per month

1-2 tasks per week

$4,676

per month

3-5 tasks per week

$6,547+

per month

5+ tasks per week

$22,464

per year

1-2 tasks per week

$56,160

per year

3-5 tasks per week

$78,624+

per year

5+ tasks per week

*Based on average kitchen cabinet maker task prices in Parramatta. Actual marketplace earnings may vary

Join Airtasker

Unlock new income opportunities in Parramatta

Explore kitchen cabinet maker related jobs and discover your financial opportunities

Type of kitchen cabinet maker job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Carpentry	$400	$1,000	$1,400
Staining	$550	$1,375	$1,925
Kitchen Cabinet Maker	$432	$1,080	$1,512
Joiner	$520	$1,300	$1,820
Cabinet Installation	$224	$560	$784

*Based on average kitchen cabinet maker task prices in Parramatta. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Kitchen Cabinet Maker Taskers in Parramatta

meet
Stanley F
11 years on Airtasker
- Melrose Park NSW
5
Overall rating
1158 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
1284 tasks
meet
Dan C
8 years on Airtasker
- Kirrawee NSW
5
Overall rating
17 reviews
95%
Completion rate
The percentage of tasks successfully completed by the Tasker
20 tasks
meet
Mauri L
8 years on Airtasker
- Willoughby NSW
5
Overall rating
483 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
557 tasks
meet
Mark M
7 years on Airtasker
- Austral NSW
4.9
Overall rating
184 reviews
99.53%
Completion rate
The percentage of tasks successfully completed by the Tasker
215 tasks
meet
Khateeb A
5 years on Airtasker
- St Marys South NSW
5
Overall rating
35 reviews
97.3%
Completion rate
The percentage of tasks successfully completed by the Tasker
37 tasks
meet
Maciek K
2 years on Airtasker
- Parramatta NSW
5
Overall rating
10 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
11 tasks
meet
Kent L
1 year on Airtasker
- Bella Vista NSW
5
Overall rating
180 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
185 tasks
meet
Zubair T
7 months on Airtasker
- Sydney City CBD NSW
5
Overall rating
65 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
87 tasks