Carpentry Jobs in Parramatta

Browse through over 500 Carpentry Jobs.

See what you could earn

$0

per month

Based on average carpentry task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Carpentry tasks in Parramatta

Check out what tasks people want done near you right now...

I have an open pantry space in my kitchen that needs to be fitted out with shelving and doors. Scope: ▪️Two narrow panels fitted to the sides of the existing kitchen cabinetry, for the doors to hang from. ▪️Doors to match existing IKEA melamine doors in the kitchen (confirmed a match is available). ▪️Fixed shelving mounted to the back wall with appropriate support underneath to hold the weight of glass jars, tins, and pantry items. Material open to the tradesperson's recommendation, doesn't need to match the IKEA melamine, but if it isn't melamine it will need to be painted white. ◾️Perforated copper inlay detail, will discuss placement and finish on site. ◾️No cabinet box needed, this is a simpler build attached directly to the space. Approximate Measurements: 238cm height, 74cm (opening) - 170cm (back) width, 58cm depth Details: ▪️Materials to be sourced and quoted by the tradesperson. ▪️Measurement to be confirmed on site before the job is priced. ▪️Budget shown is a rough guide only, final quote after inspection. Needed by end of September. Comparing quotes from more than one tradesperson before confirming, will go with whichever fits best for the job. Photos attached.

Southport QLD 4215, Australia

Sun Sep 13 2026

about 5 hours ago

Open

I am looking to hire a wood worker for a wooden box/treasure chest gift for my husband for our anniversary. My husband has a collection of decks of cards (he is into magic and poker) and has about 40 decks of cards, currebtly sitting in an old shoe box. Im hoping as a gift someone can make him a proper wooden box with different slots for his deffrent decks, kind of like a collectors box. Hoping to get this as a wooden box with his initials carved into it, i have added some inspo pics below, can negotiate price on this

Sun Sep 13 2026

about 16 hours ago

Open

Commercial Clinic Cabinetry / Joinery – 3 Rooms + Small Staff Kitchen Looking for an experienced cabinet maker/joiner to quote for a new laser & skin clinic in Shop 7. Scope: * cabinetry for 3 treatment rooms * compact lower cabinetry with basins * more overhead cabinetry to maximise floor space * small hidden staff kitchenette at the rear * commercial laminate / moisture-resistant finishes * allowance to conceal hot & cold plumbing along the solid gyprock service wall * no cabinetry or drilling into frosted glass walls/doors Design concept and measurements are available in the attached PDF. Site measure required before manufacture. Please quote for manufacture, delivery and installation. Looking for a clean, modern, premium-looking finish, but budget-conscious as this is a leased premises. Please include examples of similar commercial cabinetry work and your availability. Budget listed is a starting figure only — open to realistic quotes after site inspection.

Parramatta NSW 2150, Australia

Sun Sep 13 2026

about 20 hours ago

Open

Tv unit from china all made according to wall size Just need to install No cutting required The cream colour is all sintered stone so its heavy Gyprock wall All electrical is just plug and light so no hassle Someone who has idea for this type of product

Lalor Park NSW 2147, Australia

Sun Sep 13 2026

about 24 hours ago

Open

I’m located in Mount Warren park, QLD, 4207 Carpenter/Joiner Needed – Timber Tabletop with 5 Bowl Cut-Outs I need a timber tabletop made for our slime business display/testing station. The tabletop needs to be approximately 1900mm long × 600mm wide. I need 5 clean, evenly spaced circular holes cut into the tabletop to hold plastic slime bowls. Important: I don’t want the bowls sitting flush with the timber. I want each bowl to drop approximately halfway through the tabletop, so roughly half of the bowl is visible above the timber and the other half sits underneath. This is so kids standing around the table can easily see the slime inside the bowls. I can provide the exact diameter/measurements of the bowls before the job is started. I can also supply one of the actual bowls if needed to make sure the cut-outs are the correct size and the bowls sit at the right height. I’m happy to supply the timber myself, or if you can supply a suitable timber panel, I’m happy to pay the additional cost for the timber. For the timber, we’re looking for pine or a similar light-coloured, nice-looking timber that isn’t overly expensive. We want to keep the natural light timber look and grain visible once it has been clear coated. Open to suggestions I’d like all 5 cut outs and the outside edges to be nicely finished with no sharp or rough edges. The timber needs to have a nice smooth/sanded finish. If the timber is purchased already sanded and smooth, that is completely fine. I’d also like the entire tabletop sealed with a durable clear protective coating, including the inside edges of all 5 cut-outs, so it is protected from slime/moisture, easy to wipe clean, and still keeps the natural light timber appearance. I’m just looking for a clean, neat and professional finished product. I am located in Mount Warren park, QLD, 4207

Sat Sep 12 2026

1 day ago

Open

I’m looking for quotes for custom cabinetry for a new laser hair removal and skin clinic in Parramatta. The premises are already fitted out, so this is not a full renovation. I mainly require practical, clean and modern cabinetry for 3 treatment rooms plus a small pantry/kitchenette area. Treatment room cabinetry will be used for storing laser/skin treatment supplies, towels, consumables and equipment. I’m looking for a simple built-in design with bench space, drawers and cupboards where suitable. The pantry will require basic cabinetry and storage with a benchtop. I want the finish to look modern, professional and high-end, but because this is a leased commercial property, I’m also very conscious of keeping costs reasonable. I’m happy to consider cost-effective materials and practical suggestions from the cabinet maker. I am currently obtaining several quotes and would like someone experienced, reliable and reasonably priced. Measurements can be taken onsite, and I can provide photos/examples of the style I’m looking for. Please provide an estimated price, availability to inspect/measure, and approximate timeframe to manufacture and install.

Parramatta NSW 2150, Australia

Sat Sep 12 2026

1 day ago

Open

I want to replace my divider wall wooden tops with pine tops. Just need someone to cut the wood, I can fit myself. I am happy to deliver the wood and templates to you if needed and pick up when completed. Need someone to cut a provided length of pine into 3 pieces and bullnose/round the edges. Old divider wall tops will be supplied to use as templates for measurements. See pics for more details. Location is Waikiki but happy to drop off/pick up.

Waikiki WA 6169, Australia

Fri Sep 11 2026

3 days ago

Open

Experienced Cabinet Maker / CNC Operator / Kitchen Installer Must have strong CNC and joinery knowledge, be able to read CAD/shop drawings, assemble cabinets and accurately install kitchens on site. Experience with CNC nesting, drilling, edge-banding and cabinetry hardware preferred. Must be able to measure, problem-solve and complete installations to a high standard.$$$ great daily rate

Smithfield NSW 2164, Australia

Fri Sep 11 2026

3 days ago

Open

We are seeking experienced and reliable installers to install wall paneling and assemble furniture in several rooms of a private house. The project is expected to take approximately two months to complete. Ideal candidates should have previous experience with wall panel installation, furniture assembly, and general finishing work. Applicants must have their own professional tools and be able to work independently while maintaining a high standard of craftsmanship. We will supply all necessary glue, hardware, and installation materials. We are looking for individuals who are dependable, detail-oriented, organised, and committed to keeping the work area clean and safe throughout the project. Interested candidates should send us a copy of their CV, including details of relevant experience and previous projects.

Thu Sep 10 2026

3 days ago

Open

Browse all tasks

Last updated on 14th Sep 2026

Discover your earning potential in Parramatta

Earn money with every carpentry task

$400

per week

1-2 tasks per week

$1,000

per week

3-5 tasks per week

$1,400+

per week

5+ tasks per week

$1,732

per month

1-2 tasks per week

$4,330

per month

3-5 tasks per week

$6,062+

per month

5+ tasks per week

$20,800

per year

1-2 tasks per week

$52,000

per year

3-5 tasks per week

$72,800+

per year

5+ tasks per week

*Based on average carpentry task prices in Parramatta. Actual marketplace earnings may vary

Join Airtasker

Unlock new income opportunities in Parramatta

Explore carpentry related jobs and discover your financial opportunities

Type of carpentry job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Carpentry	$400	$1,000	$1,400
Staining	$550	$1,375	$1,925
Kitchen Cabinet Maker	$432	$1,080	$1,512
Joiner	$400	$1,000	$1,400
Cabinet Installation	$250	$625	$875

*Based on average carpentry task prices in Parramatta. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Carpentry Taskers in Parramatta

meet
Stanley F
11 years on Airtasker
- Melrose Park NSW
5
Overall rating
1152 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
1279 tasks
meet
Mark K
8 years on Airtasker
- Kellyville NSW
5
Overall rating
44 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
51 tasks
meet
Afasene T
4 years on Airtasker
- Blacktown NSW
4.8
Overall rating
63 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
71 tasks
meet
Brian M
4 years on Airtasker
- Minto NSW
4.9
Overall rating
121 reviews
99.28%
Completion rate
The percentage of tasks successfully completed by the Tasker
139 tasks
meet
Syed R
2 years on Airtasker
- Dundas Valley NSW
4.9
Overall rating
157 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
197 tasks
meet
Musabiq ahmed T
1 year on Airtasker
- St Marys NSW
4.9
Overall rating
84 reviews
98.06%
Completion rate
The percentage of tasks successfully completed by the Tasker
103 tasks
meet
Ko H
1 year on Airtasker
- Rhodes NSW
5
Overall rating
4 reviews
83.33%
Completion rate
The percentage of tasks successfully completed by the Tasker
6 tasks
meet
Kent L
11 months on Airtasker
- Bella Vista NSW
5
Overall rating
174 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
180 tasks