Electrical Jobs in Canberra Central

Browse through over 500 Electrical Jobs.

See what you could earn

$0

per month

Based on average electricians task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Electricians tasks in Canberra Central

Check out what tasks people want done near you right now...

Pick up a 5.5 kg dryer from Jerrabomberra, take it to a first floor (stairs) apartment in Lyneham and hang it on a wall. There was a dryer there so there are wood batons fixed to studs.

Lyneham ACT, Australia

Tue Jan 27 2026

about 1 hour ago

Open

Samsung freezer not cooling. Temperature is above 16 instead of being below zero.

Aranda, Australian Capital Territory

Tue Jan 27 2026

about 3 hours ago

Open

Need a NSW registered HVAC provider to issue a CoC for ventilation in a soundproof meeting pod. We have ventilation specifications demonstrating airflow/ventilation for the pod vastly exceeds ambient airflow recommendations, but certifier requires a certificate to signoff in NSW. We need certificate for TWO pods and can provide drawings and fan airflow specifications - should be OK to do online, but please advise if need to view installed pods in person (Sydney city).

Tue Jan 27 2026

about 4 hours ago

Open

I live in Melbourne, eastern suburb; we need a licensed electrician to install four power points and replace two old black cable for safety concerns ; I need a quote first; can come tomorrow and Thursday

Mon Jan 26 2026

about 5 hours ago

Open

I’m looking for a fabricator/welder to build a custom storage box / cradle to hold a round surface cleaner on top of my pressure washing frame. This will be mounted on a commercial pressure washing rig and needs to be strong, secure and vibration-resistant for transport. What I Need Built: A metal cradle/box that: • Holds a round surface cleaner (approx 20–24”) flat and secure • Prevents movement while driving • Allows quick removal for use on jobs • Has tie-down / strap anchor points • Mounts to existing aluminium frame (bolted or welded) • Has raised sides or rails to stop sliding Material Options (Open To): • Aluminium (preferred – lightweight & corrosion resistant) • Stainless steel • Powder-coated steel Happy to take advice on the best material option. Design Requirements: • Strong enough for highway travel • Rounded or deburred edges (no sharp corners • Drain holes or open base to prevent water pooling • Clean professional finish • Designed to avoid damaging the surface cleaner housing Measurements: Exact measurements and reference photos will be supplied before fabrication.

Mon Jan 26 2026

about 7 hours ago

Open

Old Hot water system has solar and a 80Liters tank and Eternity T20 , hot water stops and have to turn off and on the tap few times to get hot water in shower. need to disconnect solar and tank and ahve only GAS on. Attached photos of old system.

Mon Jan 26 2026

about 15 hours ago

Open

Our company builds electrical devices that are used in education spaces to collect audio (voices and screen audio) for transmission to learners who wear hearing aids with inbuilt receivers. We are designing a new device (with an electronics expert) but need someone to design the housing for this device with a view to having it manufactured off shore.

Mon Jan 26 2026

about 20 hours ago

Open

need printed vinyl window decals 7 in total trimmed to 860 mm x 860 mm (x 4) ; 860 mm x 960 mm; 860mm x 1,050 mm and 640mm x 950 mm , quote to be justf or printing not installation - and itemsied pelase

Mon Jan 26 2026

about 23 hours ago

Open

Hi there, I’ve just picked up a Cervélo Soloist aluminium road bike (size 54) and I’m looking for your help assessing it and planning a sensible rebuild. The frame and carbon fork are in decent condition for their age — not pristine, but no obvious issues, just normal cosmetic wear. It’s currently a bit of a Frankenstein build with mixed components. It rides and brakes fine, but I’d like to bring it back to a solid, reliable setup without going overboard on cost. One known issue: it’s missing one bolt from the seatpost clamp. The post still holds, but I’d like that replaced properly for safety. What I’m hoping for: • A general safety and condition check (frame, fork, headset, BB, wheels) • Advice on what components are worth keeping vs replacing • A practical, value-for-money rebuild plan (thinking Shimano 105-level, rim brakes) • Rough cost estimate for labour and any parts you’d recommend The bike is size 54 (I’m about 5’10”), rim brake, drop bars, and I’m aiming to use it as a road bike / commuter rather than anything exotic. Let me know if you’re happy to take a look and what the next steps would Wha ideally want: 105 Groupset (used) $280 Cassette + Chain $60 Cables + Housing $40 Wheels + Tires $160 Brake Pads $30 Bar Tape $20 Saddle + Pedals $45

Mon Jan 26 2026

1 day ago

Open

Browse all tasks

Last updated on 27th Jan 2026

Discover your earning potential in Canberra Central

Earn money with every electricians task

$400

per week

1-2 tasks per week

$1,000

per week

3-5 tasks per week

$1,400+

per week

5+ tasks per week

$1,732

per month

1-2 tasks per week

$4,330

per month

3-5 tasks per week

$6,062+

per month

5+ tasks per week

$20,800

per year

1-2 tasks per week

$52,000

per year

3-5 tasks per week

$72,800+

per year

5+ tasks per week

*Based on average electricians task prices in Canberra Central. Actual marketplace earnings may vary

Join Airtasker

Unlock new income opportunities in Canberra Central

Explore electricians related jobs and discover your financial opportunities

Type of electricians job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Electricians	$400	$1,000	$1,400
Power Point Installation	$314	$785	$1,099
Sockets and Switches Installation	$400	$1,000	$1,400
Downlights Installation	$400	$1,000	$1,400

*Based on average electricians task prices in Canberra Central. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Electricians Taskers in Canberra Central

meet
Jordan G
10 years on Airtasker
- Fisher ACT
5
Overall rating
14 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
13 tasks
meet
Andrew W
9 years on Airtasker
- Yass NSW
4.9
Overall rating
546 reviews
99.84%
Completion rate
The percentage of tasks successfully completed by the Tasker
631 tasks
meet
Codi N
8 years on Airtasker
- Canberra Central ACT
4.6
Overall rating
16 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
17 tasks
meet
Jaron O
7 years on Airtasker
- Arundel QLD
5
Overall rating
90 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
102 tasks
meet
Ashley M
7 years on Airtasker
- Queanbeyan Central NSW
4.8
Overall rating
53 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
58 tasks
meet
Christopher E
5 years on Airtasker
- Belconnen ACT
5
Overall rating
63 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
68 tasks
meet
Will T
1 year on Airtasker
- Gungahlin ACT
5
Overall rating
78 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
85 tasks
meet
Cameron S
3 months on Airtasker
- Queanbeyan NSW
5
Overall rating
9 reviews
90%
Completion rate
The percentage of tasks successfully completed by the Tasker
10 tasks