Home/
Jobs/
Carpentry/
Sydney Eastern Suburbs

Carpentry Jobs in Sydney Eastern Suburbs

Browse through over 500 Carpentry Jobs.

See what you could earn

$0

per month

Based on average carpentry task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Carpentry tasks in Sydney Eastern Suburbs

Check out what tasks people want done near you right now...

I'm writing from the Cofferoo project. We are looking for a builder that could build a fixed 5m2, small lockable coffee kiosk, made from reclaimed/recycled timber (in the visible build first). The cart should allow an accessible route for electrical wiring. There are some drawings on the cart. The reference pictures and design will be attached. The lead time is not determined yet. We could confirm that in the future discussion. Could you confirm the availability of materials and where it will be from, and the quote for the design (as detailed as possible), the fee for labour and materials separately? The budget is low for fee, future discussion welcomed.

Darlinghurst NSW 2010, Australia

Mon Nov 09 2026

about 4 hours ago

Open

Assembling retail shop Joinery

Paddington NSW 2021, Australia

Mon Nov 09 2026

about 11 hours ago

Open

We have installed new cabinet doors but one door does not close as the wall is not straight. We had a problematic experience with the installer unfortunately and need a new joiner / chippy to assist with shaving this 1 cupboard door down slightly and adding a push open or a knob (i have both options here). Hinges already on.

Paddington NSW, Australia

Sun Nov 08 2026

about 16 hours ago

Open

A custom indoor corner guinea pig cage to fit a corner space, matching the Scandinavian corner design here as closely as possible: https://www.etsy.com/au/listing/4575005164/scandinavian-corner-guinea-pig-habitat I can supply the plans if needed. There is also a similar Etsy plan with a storage drawer, "Guinea Pig Cage Plans with Storage Drawer", which is closer to what I want underneath. Please follow the design, proportions and layout of the Etsy corner design as closely as possible, adapted to the dimensions below — do not just shrink the design, as that also shrinks floor area, ramp angle and cleaning access. Size and space • Corner cage, L-shaped to fit the corner: 100cm along one wall × 130cm along the other wall..Raised base with storage underneath • Raised 25cm off the ground, with a drawer / cupboard underneath for storage (shoe rack style) — not just open legs. • The drawer / cupboard unit must still allow easy cleaning underneath the cage. Waterproof lining. • Plexiglass front if possible (please quote with and without, or state if not offered). • Pet-safe materials only: untreated pine / spruce or plywood, with a non-toxic water-based finish. No treated pine. • Delivery and installation in the corner, or flat-pack — please state which you offer. What to include in your quote 1. Fixed price including materials, finish, and delivery / installation. 2. What timber and finish you will use. 3. How long the build will take. 4. Photos of similar small furniture / pet-enclosure work, if you have them.

Sun Nov 08 2026

1 day ago

Open

I'm planning a renovation of my 2-bedroom apartment, involving replacement of the kitchen cabinetry, bathroom vanity and bedroom wardrobes. My dra tsman has recommended Polytec finishes. However, Polytec only supplies samples to cabinet makers, so I'm looking for an experienced cabinet maker who can obtain the following physical samples on my behalf and deliver them to my home in Cranbourne (3977). 1. Polytec colour samples required Please obtain physical samples of: * Wispwood – Matt * Lightstone – Matt * Gossamer White – Smooth * Alboran Stone – Smooth – Solid Core * White Cement – Matt * Blossom White – Venette – Board Decorative * Royal Oyster – Gloss * Oyster Grey – Matt – Board Decorative * Natural Cotton – Matt 2. Cabinetry profile and handle samples I would also like to receive physical samples of: * Bevel edge:: a sample demonstrating the bevel edge cabinetry finish. * Aluminium finger pull: A sample of the aluminium finger-pull profile/handle. Ideally, I'd like to see a small assembled demonstration showing how the aluminium finger pull integrates with the cabinet door. 3. What the job involves Source all nine Polytec colour samples through your trade account or supplier. Obtain the bevel edge and aluminium finger-pull samples. Ensure all samples are clearly labelled. Package and deliver all samples to my home in Cranbourne. Important: I require actual physical samples, not photographs or online images. This is a one-off sample-sourcing and delivery task only. I have already engaged an interior designer and am not looking for a cabinetry quote or commitment to undertake the renovation. 4. Pricing Please provide a fixed-price offer inclusive of: * All sample costs. * Sourcing and collection. * Delivery to my home in Melbourne. Please only offer if you have access to Polytec products through your trade account or supplier and can obtain the specified finishes. Thank you!

Sat Nov 07 2026

2 days ago

Open

Looking for a cabinetmaker to disassemble and later reassemble one kitchen cabinet. We need to clear the area for a contractor to access and work on the service stack. Photo attached

Randwick NSW 2031, Australia

Wed Nov 04 2026

5 days ago

Open

Just need to put a cover on the open area as per the image on 2 bathrooms. Just need to put the hinges and cut the board

Wed Nov 04 2026

5 days ago

Open

Source and install floating timber desk – site measure required Looking for an experienced carpenter or cabinetmaker to source and install a wall-to-wall floating timber desk in a home office. Approximate desktop dimensions are 252 cm long × 62 cm deep, to be confirmed on site. I’m after a natural oak finish, similar to the attached reference image. Main task – floating desk - Visit to confirm measurements and assess the walls. - Advise on suitable timber, thickness and how to securely support the desk, ideally with concealed brackets or framing and no visible legs. - Source and supply the timber and installation materials. - Install and finish neatly, with provision for computer cables. I’m unsure of the logistics of a floating desk this length, so I’m looking for someone who can advise on a practical solution. I may add a drawer unit underneath the right-hand side later and can potentially source this myself. Drawers aren’t required as part of the quote, but advice would be welcome. Optional second task – infill above cabinets Close the gap between the existing overhead cabinets and ceiling with a neat white bulkhead or infill. If you can only do the desk that's fine the cabinet infill can be handled separately. Please include relevant experience, availability and an indication of costs. Clarify whether your offer covers the initial site measure/consultation or the full desk installation, with materials and labour separated where possible.

Rosebery NSW 2018, Australia

Wed Nov 04 2026

5 days ago

Open

Hi, I'm looking to modify the interior of an existing built-in wardrobe into a storage and display cabinet for my photography equipment. I'd like to keep the existing wardrobe structure and doors, but add several shelves and ideally two pull-out drawers for storing camera lenses and accessories. I'm hoping to achieve a clean, organised, display-cabinet-style look. The wardrobe is approximately 57cm (W) x 57cm (D) 200cm (H) internally, and a power outlet has already been installed for a dedicated charging area. I've attached photos of the existing wardrobe and reference image to give you an idea of what I'm looking for. Would this be something your team could help with? If so, I'd appreciate an approximate quote and some information about the process

Zetland NSW 2017, Australia

Tue Nov 03 2026

6 days ago

Open

Browse all tasks

Last updated on 9th Nov 2026

Discover your earning potential in Sydney Eastern Suburbs

Earn money with every carpentry task

$500

per week

1-2 tasks per week

$1,250

per week

3-5 tasks per week

$1,750+

per week

5+ tasks per week

$2,165

per month

1-2 tasks per week

$5,413

per month

3-5 tasks per week

$7,578+

per month

5+ tasks per week

$26,000

per year

1-2 tasks per week

$65,000

per year

3-5 tasks per week

$91,000+

per year

5+ tasks per week

*Based on average carpentry task prices in Sydney Eastern Suburbs. Actual marketplace earnings may vary

Join Airtasker

Unlock new income opportunities in Sydney Eastern Suburbs

Explore carpentry related jobs and discover your financial opportunities

Type of carpentry job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Carpentry	$500	$1,250	$1,750
Staining	$720	$1,800	$2,520
Joiner	$480	$1,200	$1,680
Kitchen Cabinet Maker	$400	$1,000	$1,400
Wood Repair	$450	$1,125	$1,575
Cabinet Installation	$760	$1,900	$2,660
Cabinet Making	$900	$2,250	$3,150
Custom Shelving	$324	$810	$1,134

*Based on average carpentry task prices in Sydney Eastern Suburbs. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Carpentry Taskers in Sydney Eastern Suburbs

meet
Phuoc L
10 years on Airtasker
- East Sydney NSW
4.9
Overall rating
295 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
362 tasks
meet
Chase E
9 years on Airtasker
- Bondi Junction NSW
4.8
Overall rating
26 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
30 tasks
meet
Rama M
9 years on Airtasker
- Chester Hill NSW
4.7
Overall rating
91 reviews
98.1%
Completion rate
The percentage of tasks successfully completed by the Tasker
105 tasks
meet
Sukhbat K
8 years on Airtasker
- Ryde NSW
4.9
Overall rating
180 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
214 tasks
meet
Jack C
8 years on Airtasker
- Miranda NSW
5
Overall rating
34 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
39 tasks
meet
Justinas V
5 years on Airtasker
- Kingsford NSW
5
Overall rating
343 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
384 tasks
meet
Toufic A
4 years on Airtasker
- Old Toongabbie NSW
5
Overall rating
31 reviews
97.44%
Completion rate
The percentage of tasks successfully completed by the Tasker
39 tasks
meet
Celso M
2 years on Airtasker
- Vaucluse NSW
5
Overall rating
140 reviews
98.8%
Completion rate
The percentage of tasks successfully completed by the Tasker
167 tasks