Cabinet Making Jobs in East Melbourne

Browse through over 500 Cabinet Making Jobs.

See what you could earn

$0

per month

Based on average cabinet making task prices. Actual marketplace earnings may vary

Why join Airtasker

Join Airtasker

Cabinet Making tasks in East Melbourne

Check out what tasks people want done near you right now...

build a cupboard to house my fridge . A small broom space next to fridge. All enclosed with same facade. I would also like the fridge to be concealed with a cabinet facade. using mount bracket in image The bench needs to have a small tringel cut to make fridge aligned to wall dimensions are: width 135 (fridge is 91cm) height of space is 230c,, Depth fridge 72 Materials to be included. pale timber facade

Viewbank VIC, Australia

Thu Apr 16 2026

about 2 hours ago

Open

Looking for an experienced cabinet maker / kitchen installer to prepare an existing fridge cavity and install a Fisher & Paykel RS80A1 integrated fridge, including panel fitting and handle installation. Current cavity 860 mm (W) × 1810 mm (H) × 690 mm (D) Scope of work Cavity preparation - Reduce opening to 800–804 mm wide - Frame height down to 1800–1802 mm - Ensure cavity is square, plumb and level - Provide minimum 120 mm side return for door swing - Confirm 100 mm toe‑kick height - Remove or cut back internal timber blocking airflow above toe‑kick grille - Ensure toe‑kick grille has a clear airflow path - Confirm power point is accessible (not behind fridge) Panel & handle work - Cut one tall cabinet panel (18 mm thick) into: 2 × door panels: 1096 h × 396 w 1 × drawer panel: 598 h × 796 w - Clean, square cuts with minimum 2 mm edge radius - Drill mounting and handle holes per manufacturer specs - Install owner‑supplied handles on all fridge panels - Dry‑fit panels and label (L / R / Drawer) Fridge installation - Position and level integrated fridge - Secure appliance to cabinetry - Mount and align panels and handles - Check door swing, clearances, sealing and operation Finish - Leave fridge fully installed, aligned and operational - Cavity compliant and ready for use Existing panel and handles supplied. Infill materials supplied by Tasker. Experience with integrated / panel‑ready fridges required.

Nunawading VIC 3131, Australia

Wed Apr 15 2026

about 22 hours ago

Open

Turn current laminate kitchen cabinet doors into this design . Existing cabinets are the dark ones

Doncaster East, Victoria

Wed Apr 15 2026

about 22 hours ago

Open

Looking for help with a couple of jobs in my bathroom: * Installing a fix glass from inside. As visible in the picture, the window is behind a laundry cabinet. But it can also be accessed from outside with a simple ladder. The glass has to be glued from the inside. 570x460 *A small partition glass to go on a niche at the end of the shower screen (to avoid that water gets out of the shower area). The shape is not a straight rectangle. 595x170. The shower screen is 10mm so probably better to match it. Size needs to be checked before cutting the glass.

Hawthorn VIC 3122, Australia

Mon Apr 13 2026

3 days ago

Open

Looking for an experienced cabinet maker/joiner to quote and install a custom built-in cabinet. Indicative quote to start is fine. Final site measure can be done once we proceed. Size: 3600mm (L) x 900mm (H) x 400mm (D) OPTION 1 – Floating Cabinet (Minimal) Wall-mounted (no kickboard) Clean, flat panel doors No visible handles (push-to-open or very minimal finger pull) Shadow line or recessed underside preferred Materials to quote: White finish (matte 2-pack or high-quality laminate) OR light-toned plywood (clear finish) OPTION 2 – Built-In Cabinet with Feature Top Floor-mounted or fully built-in Same minimal flat fronts Push-to-open or concealed pulls Top options to include: Stone (light neutral tone, approx. 40–60mm thick) OR plaster/microcement finish (seamless look) Internals (both options): Adjustable shelving Soft-close hardware Please include in your quote: Price for Option 1 vs Option 2 Materials assumed Installation method Lead time What is included/excluded (e.g. stone supply, wall prep)

Abbotsford VIC 3067, Australia

Mon Apr 13 2026

3 days ago

Open

IKEA wardrobes need to be squared up at the front. Lost shape due to multiple moves. I was considering using brackets and cabinet screws just at the top to pull them across. Open to other ideas. Screws and brackets need to be hidden the best they can. The empty wardrobe photo is in the previous property (back when it was in shape) so you can see the full length.

Malvern VIC 3144, Australia

Sun Apr 12 2026

4 days ago

Open

I need someone to assemble a flat-pack shoe rack (Model 2204214228). All parts are provided, including panels and brackets, but you may need to bring your own tools. The unit is a small cabinet-style shoe rack (see images). Assembly may require: • Basic tools (screwdriver, Allen keys, etc.) • Drill (in case extra holes or adjustments are needed) Please also help check that everything is aligned and stable once assembled. Location: Malvern east

Malvern East VIC, Australia

Sun Apr 12 2026

4 days ago

Open

Feel free to give me a quote. I can pay extra in cash. Looking for an experienced installer to fit a new ducted canopy rangehood in my kitchen. Details: • Brand new rangehood (not installed yet) • No old unit to remove • Power point already available (plug-in type) • Needs proper ducting to outside。Currently NO existing hole/vent to outside No cabinet over the top of rangehood. Scope of work: • Mount rangehood securely to wall Create/cut a new hole through the wall for external venting • Install and connect ducting to external vent • Ensure good airflow and sealing • Test and confirm everything is working properly Miele DA 1260 60cm Wide Wall-mounted Rangehood Canopy width in in. (mm) 598 Canopy height in in. (mm) 125 Depth of hood canopy in in. (mm) 500 Minimum safety distance above gas cooktops (max. 12.6 kW total power, burner ≤ 4.5 kW) in mm 650 Net weight in kg 11.2 Length of supply lead in m 1.5 Standard plug fitted Total rated load in kW 0.236 Voltage in V 230 Fuse rating in A 10 Frequency in Hz 50 Number of phases 1 Extraction ducting connection at top Yes Diameter of extraction ducting connection in mm 150 Fitting template Yes

Mount Waverley VIC 3149, Australia

Fri Apr 10 2026

6 days ago

Open

I need help replacing an existing integrated compact dishwasher (Smeg ST201XA) with a new unit (HV-D6FI). This is not a straight swap — the new unit has a different door/hinge setup. Photos attached show: Current Smeg installation Existing panel alignment Internal hinge/rail setup Cabinet opening ⚠️ The Challenge The existing Smeg uses a sliding-style hinge system, which allows the cabinet panel to move as the door opens. The new unit (HV-D6FI) appears to use a more standard fixed hinge setup. Because of this: The panel alignment may not match The mounting points will likely need to be redone The door swing may need adjusting to avoid hitting the cabinet base Current panel layout: Door section ~410 mm Bottom panel ~67 mm New unit appears closer to: Door section ~330 mm Larger fixed bottom section So the split between door and base shifts, which affects alignment. ✅ What I need done Remove existing dishwasher Install new unit (HV-D6FI) Modify / reposition cabinet panel to suit new hinge geometry Ensure: Clean alignment with surrounding cabinetry Smooth door opening (no rubbing/hitting) Solid mounting 🧰 Looking for someone who: Has experience with integrated dishwashers (not just freestanding installs) Understands cabinet panel fitting + hinge systems Can problem solve alignment differences Can make it look neat and intentional

Alphington VIC 3078, Australia

Thu Apr 09 2026

7 days ago

Open

Browse all tasks

Last updated on 16th Apr 2026

Discover your earning potential in East Melbourne

Earn money with every cabinet making task

$300

per week

1-2 tasks per week

$750

per week

3-5 tasks per week

$1,050+

per week

5+ tasks per week

$1,299

per month

1-2 tasks per week

$3,248

per month

3-5 tasks per week

$4,547+

per month

5+ tasks per week

$15,600

per year

1-2 tasks per week

$39,000

per year

3-5 tasks per week

$54,600+

per year

5+ tasks per week

*Based on average cabinet making task prices in East Melbourne. Actual marketplace earnings may vary

Join Airtasker

Unlock new income opportunities in East Melbourne

Explore cabinet making related jobs and discover your financial opportunities

Type of cabinet making job	1-2 tasks/week	3-5 tasks/week	5+ tasks/week
Carpentry	$590	$1,475	$2,065
Staining	$1,000	$2,500	$3,500
Kitchen Cabinet Maker	$528	$1,320	$1,848
Cabinet Making	$300	$750	$1,050
Joiner	$700	$1,750	$2,450

*Based on average cabinet making task prices in East Melbourne. Actual marketplace earnings may vary

How to earn money on Airtasker

Job opportunities that find you

Set up notifications and be alerted when a nearby, well-matched job is posted. Let customers book you directly by setting up a listing. Provide a great service and work with them again with Contacts.

Set your price

Found a job you’re up for? Set your price and make an offer. You can adjust and discuss it later if you need to.

Work. Get paid. Quickly.

When tasks are complete, request for payment to be released and money will appear in your account instantly.

Post a task

Get Inspired: Top Cabinet Making Taskers in East Melbourne

meet
Urbano jr N
3 years on Airtasker
- St Albans VIC
5
Overall rating
58 reviews
97.26%
Completion rate
The percentage of tasks successfully completed by the Tasker
73 tasks
meet
Ali O
5 years on Airtasker
- Melbourne City CBD VIC
4.5
Overall rating
27 reviews
88.57%
Completion rate
The percentage of tasks successfully completed by the Tasker
35 tasks
meet
Linfeng W
5 years on Airtasker
- Kew East VIC
5
Overall rating
7 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
10 tasks
meet
Carlos andres C
3 years on Airtasker
- Point Cook VIC
5
Overall rating
139 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
150 tasks
meet
Noah L
3 years on Airtasker
- Eltham VIC
4.9
Overall rating
349 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
402 tasks
meet
Chengjun Q
4 years on Airtasker
- Balwyn VIC
4.8
Overall rating
394 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
467 tasks
meet
Nathaniel W
3 years on Airtasker
- Oakleigh VIC
5
Overall rating
151 reviews
100%
Completion rate
The percentage of tasks successfully completed by the Tasker
185 tasks
meet
Rajesh B
10 years on Airtasker
- Melbourne City CBD VIC
4.9
Overall rating
1970 reviews
99.96%
Completion rate
The percentage of tasks successfully completed by the Tasker
2345 tasks