Hire a trusted wall mounting service in West Brisbane

I’m looking for a licensed electrician to install a Shelly Ogemray smart relay behind an existing wall switch for my hot water booster There's an LED indicator next to the switch. The relay instructions say to not use an LED. I think this is because LEDs will inhibit the small power draw to run the smart relay. Can you ensure the LED is downstream of the switch so it doesn't mess with the relay. Job requirements: Install 1 × Shelly ogemray (supplied by me) behind an existing light switch Confirm the switch box has the required neutral connection Connect and test the Shelly and existing light switch with the LED Ensure everything is compliant with Australian electrical requirements Configure/test the relay to confirm the HWBooster operates correctly from both the physical switch and Shelly app Please only apply if you are a licensed electrician and can provide evidence of your licence.

Hi, I need the below the below shelves installed in my garage. The garage is a single car garage. The shelves need to be installed at 6ft height. https://storagesmart.com.au/products/fleximounts-wall-shelving-extra-deep?variant=39674111492304&country=AU&currency=AUD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&campaign=18174496024&adgroup=&keyword=&gad_source=1&gad_campaignid=18179231240&gclid=Cj0KCQjw--7UBhCpARIsAGJBpthfoaRPdy6oogWbndKw-AODNpIO4wl2BY6Ti8frj5GqzNd-NaIkxXcaAsgYEALw_wcB

Would love to get this done today

X6 Koala mirrors hanging on the wall. Tessellated Antique Gold Square Mirror

2 pictures (120x30) hung in a stairwell. Approximately 2000 above the step level and approximately 3500 above the floor level

Need someone to hang 3 photo frames and 2 large mirrors on wall st home in Sherwood. Unsure if we have all of the necessary equipment to hang, although there is a bunnings nearby. Afternoon is preferable.

Hang shelf into tiled wall

Meet to hang 3 floating shelves in my son’s bedroom. I have the shelves. They did not come with screws and I am not sure of the best way to fasten them to the wall. I have tried and stuffed it up which is why this job is here. Please see attached pictures

Need someone to securely hang a mirror - it is relatively heavy (10kg) - onto plasterboard wall. The mirror does not have hooks/wire behind so these will need to be provided and attached also.

Install 3-phase reference wiring + Shelly energy monitors in switchboard (licensed electrician) Scope: - Install 1 × 3-pole DIN MCB (metering/reference circuit) - Install 5 × Shelly 3EM-63W Gen3 units inside switchboard - Provide clean L1 / L2 / L3 voltage reference distribution to all Shellys - Connect: - Neutral to neutral bar - Earth to earth bar - Install and route CT clamps (3 per device = 15 total) on nominated circuits - Neatly terminate, label, and secure all wiring - Test and verify correct operation (phase alignment and readings) Requirements: - 3-phase switchboard (Hager gear) - Must be fully compliant (AS/NZS 3000) - No double-lugging of breaker terminals - Preference for clean, scalable solution (e.g. terminal blocks or equivalent) Notes: - All Shelly devices supplied - Switchboard has available DIN space - Looking for a neat, professional install — not a quick patch job Please include: - Confirmation of licence - Approach you’d take (brief) - Availability Location: Kenmore

What I wrote previously...

Apologies to previous offers. Have updated description below. Happy yo negotiate price. 1. Hang/fasten 2x 50x50cm photo frames to a brick wall/fireplace - photo attached. 2. Hang/fasten 6x A2 frames to bedroom walls. 3. Remove cardboard boxes from site - photo attached (ignore toys)

I need help to securely hang an 8–9 kg wall mirror and also put up a few pictures/frames. Looking for someone who has the right tools and experience with proper wall mounting. Details: • One large mirror (approx. 8–9 kg) • A couple of small frames/pictures • Standard indoor wall (not sure about material, may need to check) • Need someone who can bring the required screws/anchors if needed

I have 4 picture frames to be hung in a cluster on a wall. The wall is old horse hair plaster which is painted and stable. 2 frames are 530mm x 430mm. The other 2 are 200m x 260mm

Needing someone to mount mirror on concrete wall. Needing the labour and materials to mount (large screw thing to hang it) (pictured back so you know what you need)

I have approx 10-15 artworks that need to be hung on my newly painted walls in unit. One large one. Also, a coat rack. Please assist.

2 lengths of treated pine and jumbo storage hooks (2 each) onto 2 stud walls in garage, to hang bikes on. Have all materials including large batten bugle screws. Just need manpower / get into stud confidently and securely. Can BYO drill if prefer own gear.

I have 7 pictures, 1 clock, 1 family crest with tartan and 3 mirrors to be hung in my unit. I have some fixings but may need advice on the best hardware to hang them.

Hang mirror to wall. > You are to supply own tools and fixtures - requires two raised head screws, spirit level, drill and screwdriver. > Wall is very hard and so likely require sturdy drill bit. > Electrical point and light switch are adjacent to hanging point so would like you to check for any wires before drilling holes. Please refer to photos for wall, mirror, and instructions.

Need a handy man to collect storage system from bunnings and install them against brick wall. Three in total see photos.