Find a professional tree surgeon in Outer East Melbourne

Stump grinding required, see pictures

To remove one tree stump. Need stump grind as it is close to colourbond fence.

Building a fence with our neighbours, and thick tree roots have prevented us from putting the bottom plinth across. Just need it slightly ground down enough in order to put in the bottom plinth. Nothing needs to be taken away from site.

Need stump removed and roots etc

4 stumps to grind, above on a retaining wall

Stump removal of 1x large gum, 2x smaller gums and some smaller trees in front yard. 1-2 stumps in backyard

Need 5 small stumps removed from my backyard. Can be dug up or done with a stump grinder, up to you.

Tree stumps removed and taken away, garden debris already cleared just needs to be taken away.

16-20 Silver sheen and similar tree stump removal. Please provide quotation.

Removal of one pear tree including stump and take away waste

Tree stump to be remove. Please refer to the photo.

X4 small trees removed X1 medium tree removed (roughly 5-7m)

Want to remove this 3 trees from stump please send offer two of them is in driveway easy access one at the backyard

Removal of trees Gardening Removal of debris

4 x tree/tree stumps to be dug out, removed and disposed of. Make an offer. Flexible on time when job can be done

To grind tree stump below ground level and cover back with existing soil. Stump 1: Approx 70cm Stump 2: Approx 30cm Stump 3 and 4: Approx 20cm All are freshly cut stumps and soft wood

Tree stump removal near fence at front of house (tree recently cut down). If task assigned, please provide your own equipment (shovel, axe, crowbar etc) and to please shovel dirt back in the hole once removed. Many thanks in advance

Large fig tree stump and extended roots running through the ground to be removed. Note that access to the yard is a standard 880width door, so a narrow/small stump grinder required. I've also discovered there is a drain near the stump to be mindful of, see pics.

Three dead tree stumps to be removed/chopped up/mulched Make an offer

I’m looking for someone with the know how to replace 2 timber stumps that have become loose and possibly 1 or two more to atleast re secure them to the existing bearers due to a lean. There are 2 areas of the house that has sunk and would like them lifted and made secure. Access for the first 2 is easy and pretty straight forward and the other is about 5 meters under the house. Access is good and there should be plenty of room to work with. The existing first 2 stumps measure just under 800mm (exposed). You will need to bring a Jack or mini prop of some sort and stump packers with you along with the rest of the gear you will need. (The first and 3rd photo show the next stump (with level) from the crawl space access just after the main 2 and the leaning stump is the one 5m in)