**Job Title: Removal of Existing Flooring Adhesive from Pine Subfloor – Hawthorn East (20–40m²)** I'm looking for an experienced floor sanding contractor or tradesperson to remove existing flooring adhesive from the pine timber subfloor at my house in Hawthorn East. **Job Details:** - **Location:** Hawthorn East, VIC 3123 - **Area:** Approximately 20–40m² (primarily hallway/corridor) - **Existing substrate:** Pine timber floorboards fixed to timber joists - **Condition:** Existing hardwood flooring has recently been removed, leaving substantial adhesive residue across the pine boards. The removal process has also caused surface gouging, splintering and damage to some areas of the timber. - **New flooring:** 14mm engineered timber flooring, which is intended to be directly glued to the prepared pine substrate. **Scope of Works:** - Remove existing adhesive residue using appropriate professional floor sanding/scraping equipment. - Sand down raised adhesive and damaged timber fibres to achieve a clean, smooth and even surface. - Avoid excessive sanding or further damage to the existing pine floorboards. - Use appropriate dust extraction and leave the area clean. - Identify any areas of timber damage requiring separate repairs. **Important:** - This is subfloor preparation only. No staining, polishing or finishing is required. - The objective is to achieve a suitable surface for the subsequent direct glue-down installation of engineered timber flooring. - Existing adhesive composition is unknown, so appropriate assessment/testing for hazardous materials must be completed before sanding or mechanical disturbance. - Some pine boards have existing damage, so experience working with older timber subfloors is preferred. - Photos of the existing condition are attached. **Looking for someone experienced, reliable and competitively priced who has their own professional sanding equipment.**